| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Sign-extend VA for range-based TLBI invalidation
When the decode_range_tlbi() helper was moved to be used for S1 TLBIs,
the required sign extension was omitted. Add it.
As a result, special care must be taken to not overflow PA bits when
this is used for S2 invalidation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Make VNCR invalidation participate in MMU invalidation retry
A VNCR TLB invalidation can occur on one vcpu while another vcpu is
faulting in this same page. Without correctly handling this, we can
end up with the following scenario:
- vcpu A walks the PTs to translate VNCR
- before vcpu A is able to grab the MMU lock to insert the TLB,
vcpu B updates the S1 PTs with an invalid entry, and issues
a TLBI S1E2 for this VA
- vcpu A inserts the TLB for something that is now invalid
This isn't a new problem, and we manage S2 by having the MMU notifier
to bump up mmu_invalidate_seq on invalidation so that the fault can be
replayed.
We can perform something similar here, and extend invalidate_vncr_va() to
update the same counter, clearly indicating that the context has
changed under our feet. This is safe as the invalidation always happen
while holding the MMU lock for write, and that we sample the sequence
number before walking S1. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly handle end of VA space TLBI invalidation
Our TLB invalidation by VA code is based on comparing two ranges,
one defined by the TLB, and one defined by the TLBI instruction.
Each range is defined by a start and a size. However, the way the
comparison is done doesn't account for address rollover, as it
compares an address with (base + size). This works nicely until
this expression represent the last page/block in the TTBR1 VA space,
as the result is a big fat 0. And a failed TLB invalidation.
Rewrite the comparison in a way that is immune to the address
rollover (making the end address inclusive instead of exclusive),
and move this into a common helper that is used by both VA and IPA
invalidations, as suggested by Hyunwoo Kim (although the IPA version
didn't suffer from this particular problem, obviously). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Free guest debug data on vcpu destroy
kvm_s390_clear_bp_data() is only called from
kvm_arch_vcpu_ioctl_set_guest_debug(), i.e. when user space changes or
disables debugging. A vCPU that is destroyed while hardware breakpoints
are still armed - the normal case when the VMM just exits or crashes -
leaks hw_bp_info, hw_wp_info and all old_data buffers, since generic KVM
frees the vCPU right after kvm_arch_vcpu_destroy().
That is bounded by MAX_BP_COUNT entries, so roughly 8 KiB per vCPU, but
it is unbounded over VM lifetimes. The allocations are
GFP_KERNEL_ACCOUNT, so the charge also outlives the exiting process and
pins dying memcgs.
Fix by clearing the debug data on vCPU destruction. Calling it
unconditionally is fine: struct kvm_vcpu is zero allocated, so for a vCPU
that never enabled debugging the counters are 0 and the pointers NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix old_data leak in guest debug error path
__import_wp_info() allocates a per-watchpoint old_data buffer to back up
the original guest memory contents. If a later watchpoint of the same
KVM_SET_GUEST_DEBUG request fails to import, kvm_s390_import_bp_data()
jumps to the error label, which frees the wp_info array but not the
old_data buffers of the entries that were imported successfully. Up to
MAX_BP_COUNT - 1 buffers of up to MAX_WP_SIZE bytes are leaked per failed
request, and the request can be repeated.
Create error handling for cleaning up all created old_data memory
areas. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory leak in guest debug handling
bp_data is freed only for the error case by kfree(bp_data).
Every successful KVM_SET_GUEST_DEBUG will leak bp_data. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add timeout while stop_streaming
When stop_streaming is called, an infinite loop may occur in some cases.
Add a bounded poll of the queue status: loop until the queues drain,
sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT
elapses. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: avoid deleting unlinked ASC entry on link error
v4l2_async_match_notify() creates ancillary media links before adding
asc->asc_subdev_entry to sd->asc_list.
If ancillary link creation fails, the function jumps to
err_call_unbind while asc_subdev_entry has not been linked yet. Async
connections are zero-allocated, so the list entry still has NULL next
and prev pointers on this path. Calling list_del() on it can therefore
dereference NULL instead of returning the original link creation error.
Do not delete asc_subdev_entry from err_call_unbind. There is no list
insertion to undo on this path; the bound callback and sub-device
registration are the operations that need to be rolled back. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: quiesce overflow recovery before freeing streams
The VIP overflow recovery worker is armed from the hardirq handler when a
FIFO overflow is detected, and the list-complete path looks the stream up
through the VPDMA list private pointer. Both keep touching stream, port
and device state; the recovery worker also resets the parser and VPDMA,
repopulates the descriptor list, and re-enables the per-list IRQs.
vip_stop_streaming() masks and clears the per-list IRQs, but it neither
synchronizes the hardirq handler nor disables recovery_work. An overflow
IRQ that has already queued recovery_work, or a list-complete IRQ in
flight when the stream is torn down, can therefore still dereference the
stream after its resources are released: the descriptor list is freed by
vip_release_stream() on file release, and the stream itself by
free_stream() on unbind/remove.
Drain the recovery worker and the IRQ handler at both teardown points
through a shared vip_quiesce_stream() helper, before any stream-owned
resource is released. disable_work_sync() cancels pending recovery_work,
drains a running instance, and raises its disable depth, so a subsequent
schedule_work() issued by a racing IRQ handler is rejected at the
workqueue scheduler: recovery_work cannot be requeued after
disable_work_sync() takes effect. The worker may still re-enable the
per-list IRQs before disable_work_sync() returns; disable_irqs() then
masks those sources and synchronize_irq() waits for any in-flight handler
that still dereferences stream state. In vip_stop_streaming() the helper
runs before the parser is stopped, since a worker drained by
disable_work_sync() may re-enable the parser before exiting and would
otherwise undo the stop. recovery_work is created disabled and enabled in
vip_start_streaming() before IRQs, pairing the enable with the teardown
disable across the streaming lifecycle.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tda18250: fix possible integer overflow
Integer overflow may occur, when variable exp equals to zero. Result
of shift 1 << (exp - 1) may then leads to undefined behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requested but the BAR2 request
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: s2255: bound JPEG frame size before copying into the buffer
s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane. vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:
payload = le32_to_cpu(pdword[3]);
if (payload > vc->req_image_size) /* payload is checked ... */
return -EINVAL;
vc->pkt_size = payload;
vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */
A malicious or malfunctioning device can therefore report a jpg_size
larger than the destination vb2 plane, and the memcpy() writes past it.
jpg_size is a signed int, so a value with the top bit set also turns
into a huge length.
Reject a frame whose jpg_size is negative or exceeds the plane size
before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIOC_STREAMON:
1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num
to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently
leaking the coherent DMA memory allocated by the previous attempt.
2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only
increments it. After a second successful pass urbs_initialized can
exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks
from urbs_initialized - 1 down to 0 and reads past the end of
dev->urb_list[], passing garbage pointers to usb_free_urb().
Mirror the teardown that stop_streaming() already performs: on the error
path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs()
before unlocking. Both helpers are idempotent (free_urbs kills and zeros
urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the
buf_num counter), so partial-failure paths and the no-allocation paths
remain safe.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
atlas_buffer_postenable() acquires a runtime PM reference with
pm_runtime_resume_and_get() but returns the result of
atlas_set_interrupt() directly. If atlas_set_interrupt() fails,
the runtime PM reference is leaked and the device can never
autosuspend.
Add pm_runtime_put_autosuspend() on the error path to balance
the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: handle region split failure in apply_min_nr_regions()
damon_apply_min_nr_regions() repeatedly split each region until its size
becomes small enough to meet the user-defined low limit of the number of
regions. The loop assumes the split operation (damon_split_region_at())
will always succeed and create the new region. But the operation could
silently fail for memory allocation failures, for example.
If such failure happens and the region was the last region, the linked
list-based next region fetching returns invalid pointer. As a result,
invalid memory dereference and corruption could happen. Even if the
corner case is handled, it imposes stress to the allocator by trying split
regions for other targets. Fix the issue by breaking all the loops for
any region split failure.
This means there could be a min_nr_regions violation. It will only rarely
happen since the allocation is arguably too small to fail. Even if it
happens, it is only temporal. damon_apply_min_nr_regions() will be called
again after the aggregation interval.
The user impact of the issue should be minor, since the allocation is
arguably too small to fail. But, it could still theoretically happen, and
the consequence is very bad.
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: core: Fix kmemleak due to missed rc_free_device() call
The commit dccc0c3ddf8f ("media: rc: fix race between unregister and
urb/irq callbacks") removed the implicit call to rc_free_device() from
rc_unregister_device(). However, the commit missed to remove the NULL
assignment of adap->rc that is now causing rc_free_device() to never be
called on an allocated rc device.
kmemleak reports following after e.g. dw-hdmi unbind:
unreferenced object 0xffff00010ac10000 (size 4096):
comm "kworker/u16:1", pid 39, jiffies 4294897739
hex dump (first 32 bytes):
20 23 4b 0a 01 00 ff ff 08 00 c1 0a 01 00 ff ff #K.............
08 00 c1 0a 01 00 ff ff 00 00 00 00 00 00 00 00 ................
backtrace (crc e11baccc):
kmemleak_alloc+0x38/0x44
__kmalloc_cache_noprof+0x4a8/0x5e0
rc_allocate_device+0x48/0x2a0
cec_allocate_adapter+0x3ac/0x800
dw_hdmi_cec_probe+0x264/0x634
platform_probe+0xc0/0x188
really_probe+0x4a4/0x8e0
__driver_probe_device+0x2f8/0x440
driver_probe_device+0x60/0x160
__device_attach_driver+0x1a0/0x2a0
bus_for_each_drv+0x100/0x1a0
__device_attach+0x174/0x350
device_initial_probe+0x90/0xb0
bus_probe_device+0x4c/0x120
device_add+0xdec/0x116c
platform_device_add+0x354/0x598
Remove the assignment of adap->rc to NULL to let cec_delete_adapter()
free the allocated rc device after last user of the cec device exits to
fix the kmemleak. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
When the device is enumerated through its ACPI HID (IFX3100),
i2c_client_get_device_id() returns NULL: the ACPI-derived client name
does not match the driver's i2c_device_id table. dps310_probe() then
dereferences that NULL pointer in "iio->name = id->name" and crashes the
kernel during probe.
The IIO device name is always "dps310", so set it directly and drop the
now-unused device-id lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds
DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the
caller's fd table via dma_buf_fd() -> fd_install() before
dma_heap_ioctl() copies the result back to userspace. If the trailing
copy_to_user() fails, userspace never learns the fd number, but the
fd (and the underlying dma-buf reference) are already visible to
other threads in the same process and are leaked for the lifetime of
the process.
The obvious "close it on the failure path" fix is unsafe: once
fd_install() has run, another thread can already dup() the fd, send
it via SCM_RIGHTS, or close() it and let its number be reused, so a
subsequent close_fd() from the ioctl path can operate on an unrelated
file. This was pointed out by Christian König on v1 [1].
Restructure the allocation path so that fd_install() is the last,
unfailable step of a successful ioctl:
1. heap->ops->allocate() creates the dma_buf.
2. get_unused_fd_flags() reserves an fd number in the caller's
fd table without publishing it, so
no other thread can observe it.
3. copy_to_user() delivers the fd number to userspace;
on failure the fd is returned with
put_unused_fd() and the dma_buf
reference is dropped with
dma_buf_put(), leaving no user-
visible state behind.
4. dma_buf_fd_install() publishes the fd and emits the
trace_dma_buf_fd tracepoint -- from
here on the ioctl cannot fail.
A new dma_buf_fd_install() helper is introduced in dma-buf.c to wrap
fd_install() together with the DMA_BUF_TRACE() call, preserving the
export tracing that dma_buf_fd() provides. dma_heap_ioctl_allocate()
is refactored to return the struct dma_buf * directly (returning
ERR_PTR on failure) so the caller holds the dmabuf reference across
steps 3 and 4.
The failure at step 3 is easily reachable from userspace: pass a
struct dma_heap_allocation_data that lives in a page whose protection
is flipped to PROT_READ between copy_from_user() and copy_to_user()
(e.g. via mprotect()). Before this change each such ioctl leaks one
dmabuf fd; after it, the fd table is unchanged on failure and only
/dev/dma_heap/<name> remains open.
No UAPI or heap-driver interface change.
[1] https://lore.kernel.org/dri-devel/175e98de-f414-47d7-81c1-c0fe0a8f7f62@amd.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/wsse: handle damon_start() failure
Patch series "samples/damon: handle damon_{start,stop}() failures".
All DAMON sample modules are not correctly handling failures from
damon_start(). Among those, mtier also has an additional problem for
handling of damon_stop() failures. wsse and prcl also have a problem in
their damon_call() failure handling. As a result, memory leaks, next
DAMON operation disruptions, and use-after-free can happen. Fix those.
Note that only the damon_start() failure caused issues can reliably be
reproduced. Reproducing those issues require the admin permission,
though.
This patch (of 6):
damon_sample_wsse_start() callers assume it will clean up resources when
it fails. And the function does the cleanup for context buildup failures.
However, it is not doing the cleanup for damon_start() failure. As a
result, when damon_start() fails, it leaks the memory for DAMON context.
Free the context in case of the failure to fix the issues.
Note that the issue can reliably be reproduced because the module calls
damon_start() in the exclusive mode. For example,
$ sudo damo start
$ echo $$ | sudo tee /sys/module/damon_sample_wsse/parameters/target_pid
$ echo Y | sudo tee /sys/module/damon_sample_wsse/parameters/enabled
$ sudo cat /proc/allocinfo | grep damon_new_ctx
Because the first command is running another DAMON instance, the third
command fails the damon_start() call because the new DAMON instance cannot
exclusively run. And without this fix, by repeating the third and the
fourth commands above, we can show the memory consumption is only
increasing due to the leaks. It requires the sudo permission though.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: handle damon_stop() failure
damon_sample_mtier_stop() assumes its damon_stop() call will always
successfully stops the two DAMON contexts. Hence it deallocates the two
DAMON contexts after the damon_stop() call. However, if a given context
is already stopped, damon_stop() fails and returns an error while letting
the DAMON contexts that have not yet stopped keep running. This kind of
unexpected early DAMON context stops could happen due to memory allocation
failures in kdamond_fn(). Because damon_sample_mtier_stop() just
deallocates all DAMON contexts with damon_target and damon_region objects
that are linked to the contexts, the execution of the unstopped DAMON
context (kdamond) ends up using the memory that freed (use-after-free).
Fix the issue by separating the damon_stop() to be invoked per context.
Note that DAMON_SYSFS also allows multiple DAMON contexts execution. But,
it calls damon_stop() for each context one by one. Hence this issue is
only in mtier.
For the long term, it would be better to refactor damon_stop() to always
ensure stopping all contexts regardless of the failures in the middle.
Make this fix in the current way, though, to keep it simple and easy to
backport. I will do the refactoring later.
The issue was discovered [1] by Sashiko. |
