| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA
The code to restore a ZA context doesn't attempt to allocate the task's
sve_state before setting TIF_SME. Consequently, restoring a ZA context
can place a task into an invalid state where TIF_SME is set but the
task's sve_state is NULL.
In legitimate but uncommon cases where the ZA signal context was NOT
created by the kernel in the context of the same task (e.g. if the task
is saved/restored with something like CRIU), we have no guarantee that
sve_state had been allocated previously. In these cases, userspace can
enter streaming mode without trapping while sve_state is NULL, causing a
later NULL pointer dereference when the kernel attempts to store the
register state:
| # ./sigreturn-za
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000046
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x06: level 2 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
| CM = 0, WnR = 1, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 52-bit VAs, pgdp=0000000101f47c00
| [0000000000000000] pgd=08000001021d8403, p4d=0800000102274403, pud=0800000102275403, pmd=0000000000000000
| Internal error: Oops: 0000000096000046 [#1] SMP
| Modules linked in:
| CPU: 0 UID: 0 PID: 153 Comm: sigreturn-za Not tainted 6.19.0-rc1 #1 PREEMPT
| Hardware name: linux,dummy-virt (DT)
| pstate: 214000c9 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : sve_save_state+0x4/0xf0
| lr : fpsimd_save_user_state+0xb0/0x1c0
| sp : ffff80008070bcc0
| x29: ffff80008070bcc0 x28: fff00000c1ca4c40 x27: 63cfa172fb5cf658
| x26: fff00000c1ca5228 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: fff00000c1ca4c40 x21: fff00000c1ca4c40
| x20: 0000000000000020 x19: fff00000ff6900f0 x18: 0000000000000000
| x17: fff05e8e0311f000 x16: 0000000000000000 x15: 028fca8f3bdaf21c
| x14: 0000000000000212 x13: fff00000c0209f10 x12: 0000000000000020
| x11: 0000000000200b20 x10: 0000000000000000 x9 : fff00000ff69dcc0
| x8 : 00000000000003f2 x7 : 0000000000000001 x6 : fff00000c1ca5b48
| x5 : fff05e8e0311f000 x4 : 0000000008000000 x3 : 0000000000000000
| x2 : 0000000000000001 x1 : fff00000c1ca5970 x0 : 0000000000000440
| Call trace:
| sve_save_state+0x4/0xf0 (P)
| fpsimd_thread_switch+0x48/0x198
| __switch_to+0x20/0x1c0
| __schedule+0x36c/0xce0
| schedule+0x34/0x11c
| exit_to_user_mode_loop+0x124/0x188
| el0_interrupt+0xc8/0xd8
| __el0_irq_handler_common+0x18/0x24
| el0t_64_irq_handler+0x10/0x1c
| el0t_64_irq+0x198/0x19c
| Code: 54000040 d51b4408 d65f03c0 d503245f (e5bb5800)
| ---[ end trace 0000000000000000 ]---
Fix this by having restore_za_context() ensure that the task's sve_state
is allocated, matching what we do when taking an SME trap. Any live
SVE/SSVE state (which is restored earlier from a separate signal
context) must be preserved, and hence this is not zeroed. |
| A vulnerability was determined in Free5GC up to 4.1.0. The impacted element is the function establishPfcpSession of the component SMF. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. It is best practice to apply a patch to resolve this issue. |
| A weakness has been identified in Free5GC up to 4.1.0. Affected is the function SessionDeletionResponse of the component SMF. This manipulation causes null pointer dereference. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. It is suggested to install a patch to address this issue. |
| A security vulnerability has been detected in oatpp up to 1.3.1. This impacts the function oatpp::data::type::ObjectWrapper::ObjectWrapper of the file src/oatpp/data/type/Type.hpp. The manipulation leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Out-of-bounds read vulnerability in the graphics module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| A vulnerability was identified in Open5GS up to 2.7.6. This affects the function sgwc_s5c_handle_modify_bearer_response/sgwc_sxa_handle_session_modification_response of the component PGW S5U Address Handler. The manipulation leads to null pointer dereference. The attack can be initiated remotely. The exploit is publicly available and might be used. The identifier of the patch is f1bbd7b57f831e2a070780a7d8d5d4c73babdb59. Applying a patch is the recommended action to fix this issue. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.22.0, a NULL pointer dereference vulnerability in rdp_write_logon_info_v2() allows a malicious RDP server to crash FreeRDP proxy by sending a specially crafted LogonInfoV2 PDU with cbDomain=0 or cbUserName=0. This vulnerability is fixed in 3.22.0. |
| Chamilo LMS is a learning management system. Prior to 1.11.38 and 2.0.0-RC.3, an Insecure Direct Object Reference (IDOR) vulnerability in the gradebook result view page allows any authenticated teacher to delete any student's grade result across the entire platform by manipulating the delete_mark or resultdelete GET parameters. No ownership or course-scope verification is performed. This vulnerability is fixed in 1.11.38 and 2.0.0-RC.3. |
| Substance3D - Designer versions 15.1.0 and earlier are affected by a NULL Pointer Dereference vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to crash the application, causing disruption to services. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer versions 15.1.0 and earlier are affected by a NULL Pointer Dereference vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to crash the application, causing disruption to services. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: add missing ice_deinit_hw() in devlink reinit path
devlink-reload results in ice_init_hw failed error, and then removing
the ice driver causes a NULL pointer dereference.
[ +0.102213] ice 0000:ca:00.0: ice_init_hw failed: -16
...
[ +0.000001] Call Trace:
[ +0.000003] <TASK>
[ +0.000006] ice_unload+0x8f/0x100 [ice]
[ +0.000081] ice_remove+0xba/0x300 [ice]
Commit 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on
error paths") removed ice_deinit_hw() from ice_deinit_dev(). As a result
ice_devlink_reinit_down() no longer calls ice_deinit_hw(), but
ice_devlink_reinit_up() still calls ice_init_hw(). Since the control
queues are not uninitialized, ice_init_hw() fails with -EBUSY.
Add ice_deinit_hw() to ice_devlink_reinit_down() to correspond with
ice_init_hw() in ice_devlink_reinit_up(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove
On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and
ih2 interrupt ring buffers are not initialized. This is by design, as
these secondary IH rings are only available on discrete GPUs. See
vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when
AMD_IS_APU is set.
However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to
get the timestamp of the last interrupt entry. When retry faults are
enabled on APUs (noretry=0), this function is called from the SVM page
fault recovery path, resulting in a NULL pointer dereference when
amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu]
Call Trace:
amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu]
svm_range_restore_pages+0xae5/0x11c0 [amdgpu]
amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu]
gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu]
amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu]
amdgpu_ih_process+0x84/0x100 [amdgpu]
This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW
IP 9.3.0 from noretry=1") which changed the default for Renoir APU from
noretry=1 to noretry=0, enabling retry fault handling and thus
exercising the buggy code path.
Fix this by adding a check for ih1.ring_size before attempting to use
it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu:
Rework retry fault removal"). This is needed if the hardware doesn't
support secondary HW IH rings.
v2: additional updates (Alex)
(cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526) |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes
during resume from suspend when rings[q_idx]->q_vector is NULL.
Tested adaptor:
60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02)
Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003]
SR-IOV state: both disabled and enabled can reproduce this issue.
kernel version: v6.18
Reproduce steps:
Boot up and execute suspend like systemctl suspend or rtcwake.
Log:
<1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040
<1>[ 231.444052] #PF: supervisor read access in kernel mode
<1>[ 231.444484] #PF: error_code(0x0000) - not-present page
<6>[ 231.444913] PGD 0 P4D 0
<4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI
<4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170
<4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89
<4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202
<4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010
<4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000
<4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000
<4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
<4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000
<4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000
<4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0
<4>[ 231.451629] PKRU: 55555554
<4>[ 231.452076] Call Trace:
<4>[ 231.452549] <TASK>
<4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice]
<4>[ 231.453482] ice_resume+0xfd/0x220 [ice]
<4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.454425] pci_pm_resume+0x8c/0x140
<4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.455347] dpm_run_callback+0x5f/0x160
<4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170
<4>[ 231.456244] device_resume+0x177/0x270
<4>[ 231.456708] dpm_resume+0x209/0x2f0
<4>[ 231.457151] dpm_resume_end+0x15/0x30
<4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0
<4>[ 231.458054] enter_state+0x10e/0x570
Add defensive checks for both the ring pointer and its q_vector
before dereferencing, allowing the system to resume successfully even when
q_vectors are unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: sync read disk super and set block size
When the user performs a btrfs mount, the block device is not set
correctly. The user sets the block size of the block device to 0x4000
by executing the BLKBSZSET command.
Since the block size change also changes the mapping->flags value, this
further affects the result of the mapping_min_folio_order() calculation.
Let's analyze the following two scenarios:
Scenario 1: Without executing the BLKBSZSET command, the block size is
0x1000, and mapping_min_folio_order() returns 0;
Scenario 2: After executing the BLKBSZSET command, the block size is
0x4000, and mapping_min_folio_order() returns 2.
do_read_cache_folio() allocates a folio before the BLKBSZSET command
is executed. This results in the allocated folio having an order value
of 0. Later, after BLKBSZSET is executed, the block size increases to
0x4000, and the mapping_min_folio_order() calculation result becomes 2.
This leads to two undesirable consequences:
1. filemap_add_folio() triggers a VM_BUG_ON_FOLIO(folio_order(folio) <
mapping_min_folio_order(mapping)) assertion.
2. The syzbot report [1] shows a null pointer dereference in
create_empty_buffers() due to a buffer head allocation failure.
Synchronization should be established based on the inode between the
BLKBSZSET command and read cache page to prevent inconsistencies in
block size or mapping flags before and after folio allocation.
[1]
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:create_empty_buffers+0x4d/0x480 fs/buffer.c:1694
Call Trace:
folio_create_buffers+0x109/0x150 fs/buffer.c:1802
block_read_full_folio+0x14c/0x850 fs/buffer.c:2403
filemap_read_folio+0xc8/0x2a0 mm/filemap.c:2496
do_read_cache_folio+0x266/0x5c0 mm/filemap.c:4096
do_read_cache_page mm/filemap.c:4162 [inline]
read_cache_page_gfp+0x29/0x120 mm/filemap.c:4195
btrfs_read_disk_super+0x192/0x500 fs/btrfs/volumes.c:1367 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix NULL pointer dereference in ceph_mds_auth_match()
The CephFS kernel client has regression starting from 6.18-rc1.
We have issue in ceph_mds_auth_match() if fs_name == NULL:
const char fs_name = mdsc->fsc->mount_options->mds_namespace;
...
if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) {
/ fsname mismatch, try next one */
return 0;
}
Patrick Donnelly suggested that: In summary, we should definitely start
decoding `fs_name` from the MDSMap and do strict authorizations checks
against it. Note that the `-o mds_namespace=foo` should only be used for
selecting the file system to mount and nothing else. It's possible
no mds_namespace is specified but the kernel will mount the only
file system that exists which may have name "foo".
This patch reworks ceph_mdsmap_decode() and namespace_equals() with
the goal of supporting the suggested concept. Now struct ceph_mdsmap
contains m_fs_name field that receives copy of extracted FS name
by ceph_extract_encoded_string(). For the case of "old" CephFS file
systems, it is used "cephfs" name.
[ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(),
get rid of a series of strlen() calls in ceph_namespace_match(),
drop changes to namespace_equals() body to avoid treating empty
mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap()
as namespace_equals() isn't an equivalent substitution there ] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c569 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix oops due to invalid pointer for kfree() in parse_longname()
This fixes a kernel oops when reading ceph snapshot directories (.snap),
for example by simply running `ls /mnt/my_ceph/.snap`.
The variable str is guarded by __free(kfree), but advanced by one for
skipping the initial '_' in snapshot names. Thus, kfree() is called
with an invalid pointer. This patch removes the need for advancing the
pointer so kfree() is called with correct memory pointer.
Steps to reproduce:
1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase)
2. Add cephfs mount to fstab
$ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab
3. Reboot the system
$ systemctl reboot
4. Check if it's really mounted
$ mount | grep stuff
5. List snapshots (expected 63 snapshots on my system)
$ ls /mnt/test/stuff/.snap
Now ls hangs forever and the kernel log shows the oops. |
| When BIG-IP AFM or BIG-IP DDoS is provisioned, undisclosed traffic can cause TMM to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| free5GC SMF provides Session Management Function for free5GC, an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, SMF panics due to nil pointer dereference and the SMF process terminates. This is triggered by a malformed PFCP SessionReportRequest on the SMF PFCP (UDP/8805) interface. No known upstream fix is available, but some workarounds are available. ACL/firewall the PFCP interface so only trusted UPF IPs can reach SMF (reduce spoofing/abuse surface); drop/inspect malformed PFCP SessionReportRequest messages at the network edge where feasible, and/or add recover() around PFCP handler dispatch to avoid whole-process termination (mitigation only). |
| free5GC SMF provides Session Management Function for free5GC, an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, SMF panics and terminates when processing a malformed PFCP SessionReportRequest on the PFCP (UDP/8805) interface. No known upstream fix is available, but some workarounds are available. ACL/firewall the PFCP interface so only trusted UPF IPs can reach SMF (reduce spoofing/abuse surface); drop/inspect malformed PFCP SessionReportRequest messages at the network edge where feasible, and/or add recover() around PFCP handler dispatch to avoid whole-process termination (mitigation only). |
