| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate Adaptation Indication parameter length
The Adaptation Layer Indication parameter contains a fixed 32-bit
Adaptation Code Point after its parameter header. However,
sctp_verify_param() accepts a header-only parameter because the generic
parameter walker only requires the header to be present.
sctp_process_param() then reads adaptation_ind beyond the declared
parameter. When the malformed parameter is last in an INIT, the read
starts at the receive skb tail, and the value is copied into the state
cookie returned in the INIT ACK. This may disclose four receive-buffer
tail bytes.
Require the declared parameter length to match the fixed structure size
and abort the association through the existing invalid parameter length
path otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
In pcpu_create_chunk(), nr_pages is the total contiguous backing
allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated()
uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap.
Since bit N in chunk->populated means page offset N inside every unit is
backed. When nr_units > 1, the function writes beyond chunk->populated.
Fix it by using chunk->nr_pages.
It also fixes the global pcpu_nr_empty_pop_pages accounting, since
pcpu_balance_free() only iterates up to chunk->nr_pages.
Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap
properly") introduced the bitmap overflow issue. Later, commit
b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and
chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the
accounting issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: mglru: fix stale batch updates after memcg reparenting
The mglru page table walker batches per-generation size deltas in
walk->nr_pages while walking page tables without holding the lruvec lock.
The reset_batch_size() later folds those deltas into walk->lruvec under
the lruvec lock.
The page table walker can run concurrently with the memcg reparenting path
as follows:
CPU0 CPU1
==== ====
walk_mm
--> walk_page_range
--> update_batch_size
--> walk->nr_pages += delta
mem_cgroup_css_offline
--> memcg_reparent_objcgs
--> lock lruvec
lru_gen_reparent_memcg
--> reparent child folios to parent
unlock lruvec
lock lruvec
reset_batch_size
--> child lrugen->nr_pages += delta
This will trigger the following warning in lru_gen_exit_memcg():
VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
sizeof(lruvec->lrugen.nr_pages)));
And the user-visible impact of underestimated nr_pages in MGLRU was
premature OOMs because MGLRU does not try to reclaim memory when nr_pages
reaches zero, but there are still more pages.
To fix it, make reset_batch_size() check CSS_DYING under RCU before
flushing the pending batch. A non-dying memcg keeps the original lruvec
stable against RCU-delayed offlining; a dying memcg redirects the deltas
to the first non-dying ancestor. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate individual TWT params before driver setup
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
[edit commit message to not overclaim lack of validation nor
understate driver impact] |
| A vulnerability was detected in iswalle getnote-mcp up to 1.5.0. The affected element is the function fs.readFileSync of the file src/index.ts of the component upload_image. Performing a manipulation of the argument image_path results in path traversal. The attack can be initiated remotely. The exploit is now public and may be used. Upgrading to version 1.5.1 is sufficient to fix this issue. The patch is named 7f9a215e03575c650d38c8f87fc6d8d363fed80d. Upgrading the affected component is advised. |
| An issue in the inviteController.js component in Bluewave Labs Checkmate <=3.3.0 allows remote authenticated administrators to escalate privileges to superadmin via the role parameter to the /api/v1/invite endpoint. |
| SvelteKit (@sveltejs/kit) versions >=2.49.0 and <=2.52.1 with experimental remote functions and form enabled contain a CPU exhaustion vulnerability in form deserialization. An attacker can send malformed form data to cause the server to become unresponsive while processing the request, resulting in denial of service. Fixed in 2.52.2. |
| SvelteKit (@sveltejs/kit) versions >=2.49.0 and <=2.52.1 with experimental remote functions (experimental.remoteFunctions) and form enabled contain a memory exhaustion vulnerability in remote form deserialization. Malformed form data can cause excessive memory allocation, crashing the server process and resulting in denial of service. Fixed in 2.52.2. |
| SvelteKit versions from 2.49.0 through 2.53.2 (fixed in 2.53.3) contain a deserialization expansion issue in the experimental form remote function. When an application enables experimental.remoteFunctions and uses the form function to process the files array without validating files.length or individual file sizes, an attacker can submit relatively small inputs that expand into very large file arrays, leading to expensive processing and denial of service. |
| SvelteKit versions from 2.38.0 before 2.60.1 contain a race condition in query.batch that allows concurrent requests from different users to merge under a single request context. Attackers can exploit specific timing conditions to access sensitive data from other users' concurrent requests. |
| SvelteKit versions before 2.69.1 contain a prototype pollution vulnerability in remote form functions with file input fields that accept arbitrary user-controlled path names. Attackers can manipulate the deletion path to remove methods on the prototype, potentially disabling application functionality. |
| SvelteKit before 2.69.1 fails to properly validate remote form function payload sizes, allowing attackers to crash the Node process by sending large payloads. Repeated exploitation causes denial of service by repeatedly crashing the application process. |
| gitoxide versions from 0.25.4 contain an HTTP credential leak vulnerability in the curl-based transport backend where credentials are sent to attacker-controlled servers after HTTP redirects. The vulnerability occurs because credential validation checks the original URL instead of the effective URL after redirect, allowing attackers to steal authentication tokens through cross-domain redirects or HTTPS-to-HTTP downgrades. |
| gitoxide before 0.69.0 contains unchecked array indexing in delta application and uncapped allocation from attacker-controlled size headers in gix-pack. Attackers can send crafted pack data during clone or fetch operations to trigger panics or out-of-memory process kills. |
| gitoxide (Rust crates gix <= 0.72.0 and gix-validate <= 0.10.0) contains a path traversal vulnerability. The submodule name validation function in gix-validate only checks the first occurrence of '..' via name.find(b".."), allowing crafted names such as 'a..b/../../../.git/' to bypass the check; additionally this validation is never invoked in production code paths. Combined with a trust inheritance flaw in Submodule::open(), where the parent repository's git_dir_trust (Trust::Full) is cloned and the ownership verification is skipped, an attacker can craft a malicious .gitmodules file so that a victim tool built on gitoxide reads arbitrary git repository configuration (including embedded credentials) with full trust, bypassing safe-directory protections. Fixed in gix 0.82.0 and gix-validate 0.11.1. |
| gitoxide before 0.52.1 follows symlinks when reading the worktree .gitmodules file, allowing attackers to inject out-of-repository bytes into submodule metadata. Attackers can create a malicious repository with a symlinked .gitmodules pointing outside the repository tree, causing gitoxide to parse arbitrary external files as submodule configuration and expose attacker-controlled name, path, and url values. |
| gitoxide before 0.52.1 fails to validate submodule names from .gitmodules configuration, allowing path traversal when deriving submodule git directories. Attackers can craft malicious submodule names with traversal segments to redirect state() and open() functions to repositories outside .git/modules, causing repository confusion and inspection of attacker-controlled repositories. |
| gitoxide gix-packetline versions before 0.21.5 contain a panic vulnerability in the TextRef implementation that occurs when processing side-band packet lines with empty payloads. A malicious Git server can send a crafted side-band packet to trigger an index out of bounds panic, aborting the client process during fetch operations without authentication. |
| gitoxide before 0.38.2 fails to validate carriage return characters in URL values passed to credential helpers. Attackers can supply URLs containing bare carriage returns to inject additional helper protocol fields and cause credential helpers to return credentials for attacker-specified hosts instead of the requested URL. |
| gix-worktree-state before 0.33.0 (part of gitoxide) allows writing files outside the worktree on Windows. gix_worktree_state::checkout() follows an existing terminal symlink during non-exclusive (incremental) materialization (destination_is_initially_empty: false) when core.symlinks is true. If a symlink entry (mode 120000) is first checked out at a path P pointing outside the worktree, a subsequent incremental checkout of a regular-file entry (mode 100644) at the same path follows the existing reparse point and writes the blob content through the link, overwriting files outside the worktree. |
