| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The All Bootstrap Blocks WordPress plugin through 1.3.31 does not validate a block attribute before using it to build a filesystem path that is included at render time, allowing users with contributor-level access and above to include arbitrary local files, disclose their contents, and execute PHP where a local file containing PHP code can be reached. Exploitation requires the plugin's Lightspeed subsystem to be enabled, which is not the default. |
| The Clean Login WordPress plugin before 1.19 does not check whether user registration is enabled before creating an account in its registration handler, allowing unauthenticated users to create accounts even when the site has registration disabled. |
| The Clean Login WordPress plugin before 1.19 does not verify its registration CAPTCHA when the stored session value is empty, allowing unauthenticated users to bypass the anti-automation control on the registration form and create accounts without solving it. |
| A flaw was found in QEMU. The VAPIC setup hypercall in hw/i386/vapic.c does not validate that the writable RAM alias remains within the option ROM window. A privileged guest user on a Q35/KVM machine can position this alias over locked SMRAM, bypassing chipset D_LCK protection and injecting code into System Management Mode memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out-of-bounds read in ext4_read_inline_dir()
ext4_read_inline_dir() can read a dirent header past the end of its inline
buffer, triggering a slab-out-of-bounds read during getdents64():
BUG: KASAN: slab-out-of-bounds in __ext4_check_dir_entry
Read of size 2 at addr ffff88800f3dd23c by task exploit/148
...
__ext4_check_dir_entry
ext4_read_inline_dir
iterate_dir
The dirent payload lives in a buffer of exactly inline_size bytes:
dir_buf = kmalloc(inline_size, GFP_NOFS);
but iteration runs in a position space extra_offset bytes larger
(extra_size = extra_offset + inline_size) so the synthetic "." and ".."
land at their block-dir offsets. A dirent is formed at "dir_buf + pos -
extra_offset", yet the ext4_check_dir_entry() length argument uses the
larger extra_size. A position whose dirent header would extend past
extra_size is therefore accepted, and the rescan loop's rec_len probe and
ext4_check_dir_entry() dereference de->rec_len before the entry is rejected.
Reject a position whose minimum-size dirent header would not fit within
extra_size before forming de, in both the rescan and main loops, and pass
inline_size rather than extra_size to ext4_check_dir_entry() so the length
check matches the physical buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix tree connection use-after-free in smb2_tree_connect()
ksmbd_tree_conn_connect() publishes a new tree connection in
sess->tree_conns with a single reference and returns its pointer to
smb2_tree_connect(). The handler continues to initialize the object and
build the response after publication. A concurrent session logoff can
erase the connection and drop that reference, freeing the object while
the handler still uses it.
BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90
smb2_tree_connect (fs/smb/server/smb2pdu.c:2872)
handle_ksmbd_work
process_one_work
worker_thread
kthread
After xa_store() succeeds, take a second reference before releasing
tree_conns_lock. The original reference belongs to the xarray entry and
the second belongs to the creating smb2_tree_connect() handler.
Keep the references balanced in every path:
- On normal exit or an error after publication, smb2_tree_connect()
drops its creator reference. Error cleanup also calls
ksmbd_tree_conn_disconnect(), which drops the xarray reference only if
it removes the exact entry.
- SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop
its xarray reference. The request's existing lookup reference remains
owned by the request and is released by the existing cleanup.
- Session LOGOFF removes each entry and drops its xarray reference. If
it wins the race, later cleanup sees that the entry is gone and does
not drop that reference again.
To enforce this ownership, claim the disconnected state and erase the
exact entry atomically under tree_conns_lock. This guarantees one drop
for the xarray reference and one drop by each in-flight user, regardless
of which teardown path wins. If logoff removes the entry before
initialization completes, fail the connect instead of marking the
detached object TREE_CONNECTED. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: add synchronize_net() in gtp_newlink() error path to prevent use-after-free
gtp_newlink()'s error path frees tid_hash and addr_hash without
waiting for an RCU grace period after clearing sk_user_data. A
concurrent gtp_encap_recv() in softirq may still hold the gtp_dev
pointer obtained via rcu_dereference_sk_user_data() and access the
freed memory.
BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152)
Call Trace:
<IRQ>
gtp0_pdp_find+0x1f6/0x200
gtp_encap_recv+0x527/0x24b0
udp_queue_rcv_one_skb+0x75f/0xc10
Add synchronize_net() before the kfree calls in out_hashtable, which
covers all error paths from both gtp_encap_enable() and
gtp_create_sockets(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Automattic WordPress core allows DOM-Based XSS.
This issue affects WordPress versions 7.1 before 7.1.1; 7.0 through 7.0.4; 6.9 through 6.9.7; 6.8 through 6.8.8; 6.7 through 6.7.7; 6.6 through 6.6.7; 6.5 through 6.5.10; 6.4 through 6.4.10; 6.3 through 6.3.10; 6.2 through 6.2.11; 6.1 through 6.1.12; 6.0 through 6.0.14; 5.9 through 5.9.16; 5.8 through 5.8.15; 5.7 through 5.7.17; 5.6 through 5.6.19; 5.5 through 5.5.20; 5.4 through 5.4.21; 5.3 through 5.3.23; 5.2 through 5.2.26; 5.1 through 5.1.24; 5.0 through 5.0.27; 4.9 through 4.9.31; 4.8 through 4.8.30; and 4.7 through 4.7.35.
The Unauthenticated Stored XSS vulnerability in the WordPress core can be reproduced on a default WordPress installation. Comment moderation is disabled by default, and the requirement for commenters to have a previously approved comment can be bypassed. |
| A vulnerability in the handling of certain Ethernet frames in Cisco IOS XE Software for Catalyst 9000 Series Switches could allow an unauthenticated, adjacent attacker to cause an egress port to become blocked and drop all outbound traffic.
This vulnerability is due to improper handling of crafted Ethernet frames. An attacker could exploit this vulnerability by sending crafted Ethernet frames through an affected switch. A successful exploit could allow the attacker to cause the egress port to which the crafted frame is forwarded to start dropping all frames, resulting in a denial of service (DoS) condition. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: clear VM_MAYWRITE on read-only ublk char device mmap
ublk_ch_mmap() rejects mmap requests with VM_WRITE set, but never
clears VM_MAYWRITE on the resulting read-only mapping. This allows
a userspace daemon to mmap the per-queue command buffer PROT_READ,
then upgrade it to PROT_WRITE via mprotect(), since VM_MAYWRITE was
never cleared.
The command buffer holds struct ublksrv_io_desc entries that are
kernel-written ABI; a writable mapping lets an unprivileged daemon
process corrupt fields such as addr, op_flags, nr_sectors, and
start_sector.
Same bug class as the drm/panthor and drm/vc4 VM_MAYWRITE fixes, and
the 2026-08-13 ptp/vmclock fix (a5edadbae57e).
Verified via mprotect() PoC: before the fix, a PROT_READ mapping can
be upgraded to PROT_READ|PROT_WRITE and a write into the command
buffer corrupts io_desc fields (confirmed under KASAN). After the
fix, mprotect() returns -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: zero pipe read compound padding
Compound response handling extends the last response iov to an eight-byte
boundary.
smb2_read_pipe() allocates only the payload size, so the alignment padding
can expose up to seven bytes of uninitialized kernel heap memory.
Allocate the aligned size and clear the unused tail before pinning the
response buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: NUL-terminate TV mode names read from the device
gud_connector_add_tv_mode() reads a buffer of fixed-size mode names from
the USB device and passes pointers into it to
drm_mode_create_tv_properties_legacy(), which calls strlen() on each one.
Nothing guarantees the device NUL-terminates a name, so strlen() can run
past the end of a slot and, for the last mode, past the end of the
allocation.
Terminate each name at the end of its slot before use. |
| Trigger.dev before 4.6.0 fails to verify that an authenticated user controls a GitHub App installation before binding it to their organization. Attackers can claim another user's GitHub App installation by replaying state cookies and supplying sequential installation identifiers, gaining unauthorized access to the victim's repositories. |
| In AVideo through 29.0, the autoCSRFGuard() function maintains a hardcoded allowlist of exempt basenames tested without directory context, allowing plugin files matching core filenames to inherit CSRF exemptions. The LoginWordPress plugin file login.json.php inherits an exemption and unconditionally logs out authenticated users on cross-site POST requests before validating credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix use-after-free when perf mmap() revival races with the last munmap()
perf_mmap_close() drops rb->mmap_count *without* holding
event->mmap_mutex (the refcount_dec_and_test() right before the
refcount_dec_and_mutex_lock() of event->mmap_count). A concurrent
perf_mmap_rb() can slot its entire "revival" path into that window
(perf_mmap holds event->mmap_mutex for its whole duration, including
rb_alloc):
munmap side (perf_mmap_close) mmap side (perf_mmap_rb)
----------------------------------- --------------------------------
rb->mmap_count 1 -> 0 (no lock) (holds event->mmap_mutex)
inc_not_zero(rb->mmap_count) fails
ring_buffer_attach(event, NULL)
rb_alloc() + attach new rb
refcount_set(&event->mmap_count, 1)
lock; event->mmap_count 1 -> 0
ring_buffer_attach(event, NULL)
ring_buffer_put() -> frees the *new* rb
The revival's refcount_set(&event->mmap_count, 1) is an invisible
1 -> 1 write: the close frees the just-revived buffer although the
other process still has it mapped -- a page-level use-after-free
allowing local privilege escalation to root by any unprivileged user
(default kernel.perf_event_paranoid=2).
Swap the order of the two counter updates: event->mmap_count is
dropped first via refcount_dec_and_mutex_lock(), so its 1 -> 0
transition and the ring_buffer_attach() stay serialized with
perf_mmap(). rb->mmap_count == 0 then implies every event using the
buffer is detached already, so the result of the rb->mmap_count drop
can gate the remaining teardown directly and detach_rest is no longer
needed.
An earlier fix for this race from Kyle Zeng and David Lee takes
event->mmap_mutex around both counter updates [0]; here the not-last
close stays lockless. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: clear the dirty flag when unwinding an OP_UNMAP_SPARSE
A successful OP_UNMAP_SPARSE marks its region dirty with
nouveau_uvma_region_dirty() and defers the teardown to
nouveau_uvmm_bind_job_cleanup(); it does not remove the region from
uvmm->region_mt.
If a later op in the job fails, the unwind path never clears reg->dirty
(set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup
skips the teardown. The region is left in the tree with dirty set and its
completion never signalled. Later binds over that range then fail
permanently -- -ENOENT or -EINVAL from the dirty checks, or an unkillable
wait_for_completion() in bind_validate_region() -- for the lifetime of
the uvmm.
Clear reg->dirty when the unwind reverts the sparse unmap, restoring the
region to the state it was found in. |
