Export limit exceeded: 401115 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1375 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63827 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix use-after-free in rawdata dedup loop aa_replace_profiles() walks ns->rawdata_list to dedup the incoming policy blob against entries already attached to existing profiles. Per the kernel-doc on struct aa_loaddata, list membership does not hold a reference: profiles hold pcount, and when the last pcount drops, do_ploaddata_rmfs() is queued on a workqueue that takes ns->lock and removes the entry. Between dropping the last pcount and the workqueue running, an entry remains on the list with pcount == 0. aa_get_profile_loaddata() is an unconditional kref_get() on pcount, so when the dedup loop hits such an entry, refcount hardening reports refcount_t: addition on 0; use-after-free. inside aa_replace_profiles(), and the poisoned counter then trips "saturated" and "underflow" warnings on the subsequent uses of the same loaddata. Before commit a0b7091c4de4 ("apparmor: fix race on rawdata dereference") the dedup path used a get_unless_zero-style helper on a single counter, so the existing "if (tmp)" guard was meaningful. The split-refcount refactor introduced aa_get_profile_loaddata(), which has plain kref_get() semantics, and the guard quietly became a no-op. Introduce aa_get_profile_loaddata_not0(), matching the existing _not0 convention used by aa_get_profile_not0(), and use it for the rawdata_list dedup lookup so dying entries are skipped. Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu 24.04 + stress-ng 0.17.06: stress-ng --apparmor 1 --klog-check --timeout 60s Without this patch the three refcount_t warnings fire within a few seconds. With it the same 60 s run is clean. Coverage is a smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN and CONFIG_PROVE_LOCKING would be welcome from anyone with the cycles. | ||||
| CVE-2026-63816 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode - ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink - f2fs_gc - gc_data_segment - ra_data_block(cow_inode) - mapping = F2FS_I(inode)->atomic_inode->i_mapping : f2fs_is_cow_file(cow_inode) is true - f2fs_evict_inode(atomic_inode) - clear_inode_flag(fi->cow_inode, FI_COW_FILE) - F2FS_I(fi->cow_inode)->atomic_inode = NULL ... - truncate_inode_pages_final(atomic_inode) - f2fs_grab_cache_folio(mapping) : create folio in atomic_inode->mapping - clear_inode(atomic_inode) - BUG_ON(atomic_inode->i_data.nrpages) We need to add a reference on fi->atomic_inode before using its mapping field during garbage collection, otherwise, it will cause UAF issue. | ||||
| CVE-2026-63803 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hdlc_ppp: sync per-proto timers before freeing hdlc state Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp registers a timer via timer_setup(). That struct ppp is the hdlc->state allocation, which detach_hdlc_protocol() frees with kfree() in both teardown paths: unregister_hdlc_device() and the re-attach inside attach_hdlc_protocol(). The ppp proto never registered a .detach callback, so detach_hdlc_protocol() performs no timer synchronization before the kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(), is partial (it does not wait for a running callback) and only runs on the ->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A ppp_timer callback already executing (blocked on ppp->lock) survives the kfree and then dereferences proto->state / ppp->lock in freed memory, leading to a use-after-free. Fix this by adding a .detach helper that calls timer_shutdown_sync() on every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev) before kfree(hdlc->state), so timer_shutdown_sync() now runs on both free paths. timer_shutdown_sync() is used instead of timer_delete_sync() because the keepalive path re-arms the timer through add_timer()/mod_timer() and shutdown blocks any re-activation during teardown. Initialize the per-protocol timers in ppp_ioctl() when the protocol is attached, and remove the now-redundant timer_setup() from ppp_start(), so that the timers are initialized exactly once at attach time and ppp_timer_release() never operates on uninitialized timer_list structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so struct ppp's protos[i].timer is uninitialized garbage until the first timer_setup(); without this init-at-attach, attaching the PPP protocol without ever bringing the device up would leave timer_shutdown_sync() operating on uninitialized memory in .detach. Moving the init out of ppp_start() (which only runs on NETDEV_UP) into the attach path makes the initialization unconditional and avoids initializing the same timer_list twice. This bug was found by static analysis. | ||||
| CVE-2026-63797 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix use-after-free on probe error path rpmsg_chrdev_probe() stores the newly allocated eptdev in the default endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while the default endpoint may still dispatch callbacks with the stale priv pointer. Avoid publishing eptdev through the default endpoint until rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv pointer is published should be ignored by rpmsg_ept_cb(). Flow-control updates can hit rpmsg_ept_flow_cb() in the same window, so make both callbacks return success when priv is NULL. | ||||
| CVE-2026-53399 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp). | ||||
| CVE-2026-31703 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs. | ||||
| CVE-2026-16351 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 9.8 Critical |
| Sandbox escape due to use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-16362 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 8.8 High |
| Use-after-free in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 153, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-63924 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up. | ||||
| CVE-2026-63884 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated--- | ||||
| CVE-2026-64011 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list. | ||||
| CVE-2026-63994 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. | ||||
| CVE-2026-63917 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. | ||||
| CVE-2026-63866 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link() Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link routine. | ||||
| CVE-2026-63823 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.] | ||||
| CVE-2026-63808 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim. | ||||
| CVE-2026-63802 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF in __blkcg_rstat_flush() When multiple blkgs in the same blkcg are released concurrently, a use-after-free can occur. The race happens when one blkg's __blkcg_rstat_flush() removes another blkg's iostat entries via llist_del_all(). The second blkg sees an empty list and proceeds to free itself while the first is still iterating over its entries. Move the flush from __blkg_release() (RCU callback) to blkg_release() (before call_rcu). This ensures the RCU grace period waits for any concurrent flush's rcu_read_lock() section to complete before freeing. | ||||
| CVE-2026-63801 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to crypto_aead_decrypt(req) without taking a reference on the netns, unlike the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously (e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the per-netns tipc_crypto, and the completion then reads it: tipc_aead_decrypt_done() dereferences aead->crypto->stats and aead->crypto->net, and tipc_crypto_rcv_complete() dereferences aead->crypto->aead[] and the node table -- reading freed memory. Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436) This is the same class of bug that commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt side. The encrypt path takes maybe_get_net(aead->crypto->net) before crypto_aead_encrypt() and drops it with put_net() on the synchronous return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY return keeps the reference for the async callback to release. The decrypt path was left without the equivalent guard. Mirror the encrypt-side fix on the decrypt path: take a net reference before crypto_aead_decrypt() (failing with -ENODEV and the matching bearer put if it cannot be acquired), keep it across the -EINPROGRESS/-EBUSY async return, and drop it with put_net() on the synchronous success/error return and at the end of tipc_aead_decrypt_done(). Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is flooded with crafted encrypted frames from an unknown peer (driving the cluster-key decrypt path) while the bearer's netns is repeatedly torn down. The completion must run asynchronously to outlive tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts synchronously, so the async path was exercised via cryptd offload. The unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the unpatched upstream path; tipc_aead_decrypt() still lacks maybe_get_net(aead->crypto->net), so the completion can outlive the free on any config where crypto_aead_decrypt() goes async. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-63800 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix use-after-free in pnfs_update_layout() When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(), the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds, pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(), which still references 'lo'. This results in a use-after-free when the tracepoint accesses lo's fields. Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo). | ||||
| CVE-2026-63796 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject oversized group bitmap descriptors ocfs2_validate_gd_parent() only bounds bg_bits against the parent allocator's chain geometry. A malicious descriptor can still claim a bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in the group descriptor block, so later bitmap scans and bit updates can run past bg_bitmap. Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent allocator type and reject descriptors whose bg_size or bg_bits exceed that capacity. Keep the existing chain geometry check so both the on-disk bitmap layout and the allocator metadata must agree before the descriptor is used. Validation reproduced this kernel report: KASAN use-after-free in _find_next_bit+0x7f/0xc0 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) _find_next_bit+0x7f/0xc0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375) ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457) ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86) ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786) ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886) get_page_from_freelist+0x70e/0x2370 (?:?) lock_release+0xc6/0x290 (?:?) do_raw_spin_unlock+0x9a/0x100 (?:?) kasan_unpoison+0x27/0x60 (?:?) __bfs+0x147/0x240 (?:?) get_page_from_freelist+0x83d/0x2370 (?:?) ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96) sched_domains_numa_masks_clear+0x70/0xd0 (?:?) check_irq_usage+0xe8/0xb70 (?:?) __ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497) check_path+0x24/0x50 (?:?) rcu_is_watching+0x20/0x50 (?:?) check_prev_add+0xfd/0xd00 (?:?) ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?) __folio_batch_add_and_move+0x1f5/0x3d0 (?:?) ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?) filemap_add_folio+0x105/0x1f0 (?:?) ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043) ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?) down_write+0xf5/0x180 (?:?) ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?) __mark_inode_dirty+0x758/0x9a0 (?:?) inode_to_bdi+0x41/0x90 (?:?) balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?) generic_perform_write+0x252/0x440 (?:?) mnt_put_write_access_file+0x16/0x70 (?:?) file_update_time_flags+0xe4/0x200 (?:?) ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?) lock_acquire+0x184/0x2f0 (?:?) ksys_write+0xd2/0x170 (?:?) apparmor_file_permission+0xf5/0x310 (?:?) read_zero+0x8d/0x140 (?:?) lock_is_held_type+0x8f/0x100 (?:?) | ||||