| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libexpat before commit 13c5f63 contains a heap buffer over-read vulnerability in xmlparse.c. XML_ParseBuffer advances the parse buffer end with parser->m_bufferEnd += len using a caller-supplied length that is not validated against the allocated buffer size, so repeated XML_ParseBuffer calls move m_bufferEnd past the end of the heap allocation and subsequent parsing reads out of bounds. Reaching this path requires a parse buffer to already be present; otherwise XML_ParseBuffer returns XML_ERROR_NO_BUFFER. A buffer is present after a prior call to XML_GetBuffer, either directly (the common case) or indirectly through a prior XML_Parse call that allocates the buffer internally. The over-read discloses adjacent heap memory to the calling application, recovering heap pointers, libc function pointers, and code pointers sufficient to defeat ASLR and build further exploitation primitives. |
| A flaw was found in source-to-image. When unpacking archive files, the application fails to properly sanitize symbolic links pointing to absolute file paths. An attacker who supplies a malicious builder image can exploit this vulnerability by embedding links pointing outside the extraction directory. This allows the attacker to bypass sandbox boundaries, potentially leading to unauthorized information disclosure or file modification on the host system. |
| A flaw was found in m17n-lib. An attacker could provide specially crafted or truncated UTF-8 input to trigger an unhandled null pointer dereference during text processing. This issue causes the application to crash unexpectedly, resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
IB/iser: reject a remote invalidation of an unregistered direction
A write command whose data is sent entirely as immediate data is not
registered. iser_reg_mem_fastreg() takes the DMA key path and leaves
rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has
already set dir[ISER_DIR_OUT].
iser_check_remote_inv() looks at dir[] alone and hands the descriptor to
iser_inv_desc(), which reads desc->sig_protected. A target that answers
such a command with IB_WR_SEND_WITH_INV faults the initiator.
Leaving those commands unregistered is deliberate.
The same function already terminates the connection when a target sends
a remote invalidation the initiator did not ask for. A target that
invalidates a direction that was never registered is in the same class,
so give it the same answer.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 0 UID: 0 PID: 40 Comm: kworker/u8:2 Not tainted 7.2.0-rc5-ISERHOST-gf5098b6bae76-dirty #3 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: rxe_wq do_work
RIP: 0010:iser_task_rsp+0x6d6/0xec0
Code: 48 c1 ea 03 80 3c 02 00 0f 85 ba 06 00 00 48 8b 9b 78 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 20 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 76 06 00 00 80 7b 20 00 0f 84 3d 04
RSP: 0018:ffff88811b008db8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000001848
RDX: 0000000000000004 RSI: 1ffff11021587b12 RDI: 0000000000000020
RBP: ffff88810adc1ae4 R08: ffff888109b7f860 R09: ffffffff90a922c0
R10: ffff88810adc1a1c R11: 000000000000003c R12: ffff888109b7f800
R13: ffff88810adc1acc R14: ffff888109b7f820 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88818a676000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005afe2b CR3: 000000010af23005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
__ib_process_cq+0xe1/0x390
ib_poll_handler+0x6e/0x200
irq_poll_softirq+0x1df/0x480
? clockevents_program_event+0x2ba/0x860
? __pfx_irq_poll_softirq+0x10/0x10
handle_softirqs+0x18e/0x590
? __pfx_handle_softirqs+0x10/0x10
? __hrtimer_rearm_deferred+0x156/0x450
do_softirq+0x3b/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x61/0x70
__alloc_skb+0x732/0x890
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx___alloc_skb+0x10/0x10
? _raw_read_unlock_irqrestore+0x16/0x50
rxe_init_packet+0x16b/0x4f0
prepare_ack_packet+0xb8/0x830
rxe_receiver+0x499/0x9980
? __pfx_rxe_receiver+0x10/0x10
? rxe_completer+0x29e5/0x38c0
? hrtimer_start_range_ns_common+0x75f/0x1730
? hrtimer_start_range_ns+0xa6/0x2c0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_rxe_receiver+0x10/0x10
do_work+0x144/0x470
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds
rxe_get_mcg() publishes a newly allocated multicast group in
rxe->mcg_tree before programming the backing Ethernet multicast address
with rxe_mcast_add(), which runs outside mcg_lock. A local userspace
RDMA client reaches this path with ATTACH_MCAST on a UD QP; if
rxe_mcast_add() then returns an error (for example -ENODEV when the
backing netdev has been removed, or a propagated dev_mc_add() error),
the unwind frees the published group without removing it from the tree.
A later lookup of the same MGID dereferences the freed struct rxe_mcg
from __rxe_lookup_mcg().
Fix this by keeping the new mcg private until rxe_mcast_add() succeeds.
Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add()
before taking the tree reference, and free the still-private mcg on
failure. Because the group is never visible in mcg_tree until the
multicast address is programmed, no concurrent caller can look it up or
attach a QP to a group that is about to be torn down, so the error path
needs no conditional unwind. If another caller publishes the same MGID
while the address is being programmed, the post-add re-check under
mcg_lock finds the winner; this caller then drops its private object and
balances its own rxe_mcast_add() with rxe_mcast_del() before returning
the winner.
Reproduced by forcing the rxe_mcast_add() error return under KASAN:
without the change the next attach to the same MGID reports a
slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure
returns cleanly. A no-injection attach/detach regression, including a
two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. |
| A flaw was found in sssd. A local unprivileged user could send a specially crafted request with a zero-length body to the Network Security Services (NSS) responder. This could lead to a denial-of-service condition, causing the NSS responder to become unstable or terminate. This vulnerability affects the availability of the system responder. |
| vLLM is an inference and serving engine for large language models. Prior to 0.24.0, the input_audio handling path for /v1/chat/completions calls AudioMediaIO.load_bytes or AudioMediaIO.load_file without passing VLLM_MAX_AUDIO_DECODE_DURATION_S to the shared audio decoder. An unauthenticated client can therefore submit a small compressed audio input that expands into a very large float32 PCM allocation, bypassing the duration guard already used by /v1/audio/transcriptions and causing an out-of-memory worker crash. Inline data URLs reach this path without being bounded by VLLM_AUDIO_FETCH_TIMEOUT. The issue affects deployments serving an audio-capable model, and authentication changes only the deployment-specific reachability. This issue is fixed in version 0.24.0. |
| In stpropnci_process of stpropnci.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| TP-Link Tapo
C500 v2.0 contains an out-of-bounds function-pointer dispatch in its TDP
(TP-Link Device Protocol) daemon. A single unauthenticated UDP datagram can
cause an invalid indirect call, crashing the main service and resulting in a
denial-of-service condition.
Successful
exploitation may allow an unauthenticated attacker with network access to the
affected UDP service to repeatedly crash the TDP daemon, disrupting normal
device operation and availability. No authentication, session establishment, or
pairing is required to trigger the condition. |
| vLLM is an inference and serving engine for large language models. Prior to 0.28.0, request bodies for Chat Completions and Responses can set media_io_kwargs.video.video_backend to pynvvideocodec, and MediaConnector.fetch_video forwards that choice to VideoMediaIO even when startup configuration selected a software decoder. The engine's _reserve_mm_ipc_gpu_memory logic budgets decoder memory only from static configuration, so the request-selected VIDEO_LOADER_REGISTRY backend can create a CUDA context, decoder surfaces, and decoded-frame allocations that were not removed from the engine's KV-cache budget. An attacker able to submit video requests to a video-capable GPU deployment with PyNvVideoCodec installed can exhaust shared GPU memory, causing request failures, worker crashes, or denial of service. The first release containing the fix is version 0.28.0. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables
Locked QP and CQ lookups from EQ interrupts can deadlock with
create-path XArray updates. If an interrupt arrives while the create
path holds the plain xa_lock, the lookup spins forever trying to
acquire the same lock.
Use IRQ-safe XArray helpers for all QP and CQ create-path updates,
including the GSI QP store and error paths. Initialize both arrays with
XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mad: Fix receive buffer leak when PKey enforcement fails
ib_mad_complete_recv() initializes mad_recv_wc->rmpp_list and then runs
ib_mad_enforce_security() before linking recv_buf onto that list. On
failure it calls ib_free_recv_mad(), which only walks rmpp_list and frees
the ib_mad_private of every buffer found there. As the list is still
empty at that point, nothing is freed at all.
The caller cannot clean up either: ib_mad_recv_done() sets recv to NULL
right after ib_mad_complete_recv() returns, assuming the MAD layer took
ownership of the buffer. Every MAD that fails the PKey check therefore
leaks one ib_mad_private (about 300 bytes per IB port MAD, ~2K for OPA),
and a remote node can trigger this repeatedly by sending MADs with a
wrong PKey.
Link recv_buf onto rmpp_list right after the list is initialized, so the
error path has something to free. |
| A flaw was found in oc-mirror. During mirroring operations, the embedded local cache registry binds to all network interfaces without authentication or encryption instead of restricting access to the local system. An unauthenticated attacker on an adjacent network can connect to the exposed service to push tampered container images, delete cached images, or access mirrored content. |
| A flaw was found in openshift/oauth-server. The OAuth login and error page endpoints pass the unauthenticated Accept-Language header to golang.org/x/text/language.ParseAcceptLanguage() without input validation. A bypass of the CVE-2022-32149 mitigation exists: the upstream guard counts only '-' characters but the internal BCP 47 scanner aliases '_' to '-' after the guard check. An unauthenticated attacker can send a crafted Accept-Language header using '_' separators to trigger quadratic-time parsing, consuming excessive CPU and denying authentication to all cluster users. |
| Improper neutralization of special elements used in a command ('command injection') in Microsoft 365 Copilot's Business Chat allows an unauthorized attacker to disclose information over a network. |
| A stored cross-site scripting (XSS) weakness in Kiteworks Core could allow an administrator holding only a single, narrowly scoped delegated permission to store crafted content that later executes arbitrary JavaScript in the authenticated session of a System Administrator who views the affected page. This could have permitted the lower-privileged administrator to escalate to full administrative control of the tenant, including the creation of a new administrative account. |
| An administrative import function in Kiteworks Core did not verify that the requesting administrator was entitled to create the privileged integration credential being imported. A delegated administrator holding a single narrowly scoped administrative permission could therefore obtain full system administrator privileges, without any action by an existing system administrator. |
| A flaw was found in kube-compare. When processing a 'container://' reference path, the tool incorrectly executes an untrusted container image's entrypoint instead of merely extracting data from a stopped container. This allows a remote attacker to achieve arbitrary code execution on the operator's workstation. If the Docker daemon requires elevated privileges, the untrusted code may execute with root-mediated daemon privileges, posing a significant security risk. |
| Kiteworks Core did not apply its gateway-level API security controls to every request authenticated through the platform's central authentication service. An authenticated user could reach REST API functionality over a request path on which those controls, including enforcement of signed-out and revoked sessions, were not applied. |
| A Kiteworks appliance setup interface did not confine a user-supplied file path to its intended directory, which could allow an unauthenticated attacker to write a file to any location writable by the affected service account, potentially compromising the integrity of the appliance or rendering it unavailable until an operator intervenes. Exploitation requires network access to the affected interface, which is not reachable on a fully configured appliance in its default configuration; reaching it depends on either the transient window while an appliance is first being provisioned or a non-default appliance configuration. |
