| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.4.8), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.4.8). The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.
This could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers. |
| The Matrix specification before 1.16 (i.e., with a room version before 12) lacks create event uniqueness. |
| Webserver crash caused by scanning on TCP port 80 in Softing Industrial Automation GmbH gateways and switch.This issue affects
smartLink HW-PN: from 1.02 through 1.03
smartLink HW-DP: 1.31 |
| os/linux/elf.rb in Homebrew brew before 4.2.20 uses ldd to load ELF files obtained from untrusted sources, which allows attackers to achieve code execution via an ELF file with a custom .interp section. NOTE: this code execution would occur during an un-sandboxed binary relocation phase, which occurs before a user would expect execution of downloaded package content. (237d1e783f7ee261beaba7d3f6bde22da7148b0a was the tested vulnerable version.) |
| SAP NetWeaver Business Warehouse CCAW application allows a privileged attacker to cause a high CPU load by executing a RFC enabled function modules without any input parameters, which results in reduced performance or interrupted operation of the affected resource. This leads to low impact on availability of the application, there is no impact on confidentiality and integrity. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub and other standards. This vulnerability allows a user to maneuver the Webfinger mechanism to perform a GET request to any internal resource on any Host, Port, URL combination regardless of present security mechanisms, and forcing the victim’s server into an infinite loop causing Denial of Service. Moreover, this issue can also be maneuvered into performing a Blind SSRF attack. This vulnerability is fixed in 1.0.14, 1.1.11, 1.2.11, and 1.3.4. |
| The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Prior to pseudoversion `v0.0.0-20240729232818-a2a9c4f`, which corresponds with commit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252`, there was a logical problem in the paragraph function of the parser/block.go file, which allowed a remote attacker to cause a denial of service (DoS) condition by providing a tailor-made input that caused an infinite loop, causing the program to hang and consume resources indefinitely. Submit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252` contains fixes to this problem. |
| Tokens in CTFd used for account activation and password resetting can be used interchangeably for these operations. When used, they are sent to the server as a GET parameter and they are not single use, which means, that during token expiration time an on-path attacker might reuse such a token to change user's password and take over the account. Moreover, the tokens also include base64 encoded user email.
This issue impacts releases up to 3.7.4 and was addressed by pull request 2679 https://github.com/CTFd/CTFd/pull/2679 included in 3.7.5 release. |
| Improper Neutralization of Script in Attributes in a Web Page vulnerability in Forcepoint Email Security (Blocked Messages module) allows Stored XSS.
This issue affects Email Security through 8.5.5. |
| ts-asn1-der is a collection of utility classes to encode ASN.1 data following DER rule. Incorrect number DER encoding can lead to denial on service for absolute values in the range 2**31 -- 2**32 - 1. The arithmetic in the numBitLen didn't take into account that values in this range could result in a negative result upon applying the >> operator, leading to an infinite loop. The issue is patched in version 1.0.4. If upgrading is not an option, the issue can be mitigated by validating inputs to Asn1Integer to ensure that they are not smaller than -2**31 + 1 and no larger than 2**31 - 1. |
| Stored cross-site scripting (XSS) vulnerability in the LMT Dashboard of the Perx Customer Engagement & Loyalty Platform allows an authenticated attacker to execute arbitrary JavaScript code in a victim's browser. The vulnerability is due to improper sanitization of SVG file uploads. An attacker can upload a malicious SVG file containing a script payload to a campaign. When another user views this image on the public LMT microsite, the script executes, which can lead to session hijacking, data theft, or other unauthorized actions.This issue affects Customer Engagement & Loyalty Platform before 4.617.4. |
| In Genivia gSOAP with a specific configuration an unauthenticated remote attacker can generate a high CPU load when forcing to parse an XML having duplicate ID attributes which can lead to a DoS. |
| A Denial of Service (DoS) vulnerability exists in the jaraco/zipp library, affecting all versions prior to 3.19.1. The vulnerability is triggered when processing a specially crafted zip file that leads to an infinite loop. This issue also impacts the zipfile module of CPython, as features from the third-party zipp library are later merged into CPython, and the affected code is identical in both projects. The infinite loop can be initiated through the use of functions affecting the `Path` module in both zipp and zipfile, such as `joinpath`, the overloaded division operator, and `iterdir`. Although the infinite loop is not resource exhaustive, it prevents the application from responding. The vulnerability was addressed in version 3.19.1 of jaraco/zipp. |
| A vulnerability in the packet inspection functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to incorrect processing of traffic that is inspected by an affected device. An attacker could exploit this vulnerability by sending crafted traffic through the affected device. A successful exploit could allow the attacker to cause the affected device to enter an infinite loop while inspecting traffic, resulting in a DoS condition. The system watchdog will restart the Snort process automatically. |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| While assignment of a user to a team (bracket) in CTFd should be possible only once, at the registration, a flaw in logic implementation allows an authenticated user to reset it's bracket and then pick a new one, joining another team while a competition is already ongoing.
This issue impacts releases from 3.7.0 up to 3.7.4 and was addressed by pull request 2636 https://github.com/CTFd/CTFd/pull/2636 included in 3.7.5 release. |
| Vitess is a database clustering system for horizontal scaling of MySQL. When executing the following simple query, the `vtgate` will go into an endless loop that also keeps consuming memory and eventually will run out of memory. This vulnerability is fixed in 19.0.4, 18.0.5, and 17.0.7. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix readahead reclaim deadlock
Commit e26ee4efbc79 ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()). |
| There is a HIGH severity vulnerability affecting the CPython "zipfile"
module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected.
When iterating over names of entries in a zip archive (for example, methods
of "zipfile.Path" like "namelist()", "iterdir()", etc)
the process can be put into an infinite loop with a maliciously crafted
zip archive. This defect applies when reading only metadata or extracting
the contents of the zip archive. Programs that are not handling
user-controlled zip archives are not affected. |
