| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
Since the RX path was converted to zero-copy, the page pool page is handed
to the stack directly as the skb head, and the offset the DMA engine writes
at is what determines the alignment of the packet headers.
Before the conversion the payload was copied into an skb obtained from
napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The
conversion moved the headroom into stmmac_rx_offset() but did not carry
over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP
header now lands misaligned:
64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98
Same for the XDP branch:
256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290
On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses
even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set.
Any received echo request panics the machine, e.g:
Unhandled fault: alignment exception (0x001) at 0x81873062
Internal error: : 1 [#1] SMP ARM
Hardware name: Altera SOCFPGA Arria10
PC is at icmp_echo+0x38/0xa8
LR is at icmp_rcv+0x22c/0x370
Call trace:
icmp_echo from icmp_rcv+0x22c/0x370
icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224
ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0
ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50
ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118
ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc
ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0
...
napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030
Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003)
Kernel panic - not syncing: Fatal exception in interrupt
The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo().
Fix by adding NET_IP_ALIGN back to the RX offset, which restores the
alignment the stack used to get.
Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar
change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert
"stmmac: align RX buffers"") because it caused packet corruption. That
patch raised the offset from 0 without adjusting the buffer size
accounting, so the DMA engine could arguably write past the end of the RX
buffers, though this was never root caused.
Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX
path") since derives the page pool allocation from stmmac_rx_offset(), so
the extra bytes are accounted for. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_codel: clamp default quantum and mtu
fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_codel_change()
and constrain to [256, FQ_CODEL_QUANTUM_MAX].
The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit
below, and fq_codel_change() never updates it. codel_should_drop()
tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and
the default 32 MiB memory_limit, the test is always true, so CoDel is
silently and completely disabled (no drops, no ECN). Declare a single
clamped mtu and assign both q->quantum and q->cparams.mtu from it,
which also removes the double psched_mtu() call.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: Fix the condition to enable over-io-uring
The existing condition in fuse_uring_cmd() is there only to avoid
disabling io-uring for connections that already run with it, missing
was a condition to refuse any IORING_OP_URING_CMD if the
connection/channel didn't get enabled because of missing FUSE_INIT
reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in
fuse_uring_ready() doesn't work and IO could already be going on and
cause deadlock states (at a minimum one between fch->bg_lock and
queue->lock).
The change itself is trivial, but brings behavior change,
FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers
to accept any IORING_OP_URING_CMD. Libfuse does that and the only
non-libfuse implementation I found (fractal-fuse) also does it.
Qemu patches for fuse-io-uring are not merged yet, as far as I know.
Moved up is the smp_load_acquire(&fch->initialized) check, as a
fuse-server implementation might try to setup io-uring before FUSE_INIT
is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN.
Also fixed is a stale comment that explains the handling of the
FUSE_OVER_IO_URING flag in early RFC versions.
If there should be a report from any library or application we
probably need to revert this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: fix sleep in atomic context in MAC table access
sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates
dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() /
sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These
take sparx5->lock, a mutex, and then poll the MAC access command
register with readx_poll_timeout(). A mutex may block, which is not
allowed from atomic context.
Convert the driver to the new .ndo_set_rx_mode_async callback introduced
in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and
netdev_rx_mode_work"). The async callback is invoked from process
context, so the mutex and sleeping completion poll can remain.
Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip
preempt_count: 201, expected: 0
Call trace:
__might_resched+0x144/0x248
__might_sleep+0x48/0x7c
__mutex_lock+0x74/0x850
mutex_lock_nested+0x24/0x30
sparx5_mact_learn+0x78/0x100
sparx5_mc_sync+0x40/0x54
__hw_addr_sync_dev+0xc4/0x170
sparx5_set_rx_mode+0x4c/0x58
__dev_set_rx_mode+0x64/0xa4
__dev_open+0x1ec/0x26c |
| WACRM is a self-hostable CRM template for WhatsApp. In version 0.7.0 and earlier, the profiles_update row-level security policy in supabase/migrations/017_account_sharing.sql permits authenticated users to modify their own account_role and account_id, allowing a viewer to self-promote or move into another tenant and then access or modify tenant resources. Separately, match_ai_knowledge_fts and match_ai_knowledge_semantic in supabase/migrations/030_ai_knowledge.sql run as SECURITY DEFINER, accept a caller-controlled p_account_id, and omit an is_account_member check, allowing an authenticated non-member to read another tenant's knowledge-base chunks. This vulnerability is fixed with commit e01f7ed37184f972ace8fb2da5c3e37e56a6050f. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_htb: limit htb_classify inner-class filter hops
htb_classify() follows each filter-selected inner class by switching
to cl->filter_list, but never bounds the number of hops. A filter on
an inner class can point back to itself or to another inner class that
points back, creating an infinite loop in the packet classification
path with the qdisc lock held and BH disabled — a soft lockup / panic
from a single packet.
Bound the traversal with a hop counter and drop the packet with a
rate-limited warning once the bound is exceeded. The counter is
incremented at the point the inner filter chain is picked up, after the
TC_ACT_* switch has consumed the classifier verdict, so a terminal
TC_ACT_QUEUED/STOLEN/TRAP on the last permitted chain still sets *qerr
to __NET_XMIT_STOLEN and the packet is not charged as a drop by this
qdisc or its parent.
The bound is TC_HTB_MAXDEPTH, taken from HTB's own parameters rather than
from the qdisc hierarchy depth limit. Class levels run from 0 to
TC_HTB_MAXDEPTH - 1, so a traversal that strictly descends in level can
take at most TC_HTB_MAXDEPTH hops. That descent is what a sane
configuration does, but it is assumed here rather than enforced:
htb_find() resolves a classid against every class in the qdisc, so a
filter may equally select a sibling or an ancestor. The normal
root -> inner -> leaf path takes a single hop, so the bound does not
affect legitimate classification.
htb_classify() can now return NULL irrespective of CONFIG_NET_CLS_ACT,
whereas previously every NULL return sat inside that ifdef. The NULL
handler in htb_enqueue() therefore cannot stay conditional either, so
drop the ifdef around it. This matches hfsc_enqueue(), which has always
handled a NULL class unconditionally. Without it, a kernel built
without actions would dereference a NULL class instead of dropping.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_SCH_HTB, CONFIG_NET_CLS_U32,
CONFIG_LOCKUP_DETECTOR.
- Create an HTB qdisc on a device (e.g. lo), add an inner class
1:1 with a leaf child 1:10, install a root u32 filter selecting
1:1, and an inner-class u32 filter on 1:1 also selecting 1:1.
- Send one packet (ping). On the unfixed kernel the classify loop
spins with the qdisc lock held; with softlockup_panic=1 it panics.
- Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum before hhf_change() to avoid overflow
hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow
check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting
MTU 2147483634) makes weight * quantum overflow the signed deficit in
hhf_dequeue(), spinning forever.
Clamp q->quantum before hhf_change() so both the opt and !opt paths see
a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with
a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option
present) fails with -EINVAL because hhf_change() re-validates the
unclamped default (sch_hhf.c:559). 256 matches fq_codel's floor and is
a sane minimum for a DRR quantum.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Replace ly instruction with llgf
cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads
the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
visconti_clk_register_gate() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: rtc: time out alarm requests
RTC class operations run with rtc_device.ops_lock held. The virtio RTC
alarm requests currently wait without a timeout for the device to return
their requestq buffers.
On surprise removal, virtio-pci marks the virtqueues broken before
unregistering the virtio device. If an alarm request is waiting when the
device stops responding, viortc_remove() blocks in viortc_class_stop()
while trying to acquire ops_lock. The request cannot complete and device
removal hangs until the waiting task is signalled.
Use the same 60-second timeout as clock read requests for alarm reads,
alarm programming, and alarm interrupt enable requests. The existing
message reference counting keeps a timed-out request alive until a late
response or device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix deadlock in complain-mode change_hat
The use of change_hat when in complain mode can cause a deadlock
when the hat doesn't exist and a new learning profile is created
for the missing profile. This is because change_hat() has taken
the lock to search the hat list and creating the new learning
profile needs to take the lock to add it to the list.
From the bug report:
Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su
in complain mode set to change hats. Then verified in newest
available vanilla kernel I've compiled to see if still present:
7.2-rc7 vanilla -> affected
checked also some other kernels:
6.18.44 vanilla -> affected
6.12.95 with debian patches -> unaffected
On systems without bug (for example 6.12.95 debian) it just prints:
aa_change_hat rc=0
On systems with bug, the executable always hangs, prints nothing and
becomes unkillable. (And once stuck this way, it will cause any
further hat changes to also cause the changing process to get stuck)
Then in syslog you can find hint about cause:
kernel: INFO: task hat:3409 blocked for more than 483 seconds.
kernel: Not tainted 7.2.0-rc7 #1
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800
kernel: Call Trace:
kernel: <TASK>
kernel: __schedule+0x48f/0xfe0
kernel: schedule+0x27/0xa0
kernel: schedule_preempt_disabled+0x15/0x30
kernel: __mutex_lock.constprop.0+0x569/0xa10
kernel: aa_new_learning_profile+0x15f/0x210
kernel: build_change_hat+0x19f/0x3b0
kernel: change_hat.isra.0+0x5dd/0xd60
kernel: aa_change_hat+0x2f3/0x710
kernel: aa_setprocattr_changehat+0x121/0x1f0
kernel: do_setattr+0x28c/0x340
kernel: apparmor_setselfattr+0x20/0x50
kernel: security_setselfattr+0xf6/0x110
kernel: __x64_sys_lsm_set_self_attr+0x53/0x90
kernel: do_syscall_64+0xdd/0x5e0
kernel: ? __mod_memcg_lruvec_state+0xfd/0x260
kernel: ? lruvec_stat_mod_folio+0x8d/0xd0
kernel: ? __folio_mod_stat+0x2d/0x90
kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0
kernel: ? do_anonymous_page+0x184/0xa10
kernel: ? __handle_mm_fault+0x805/0x870
kernel: ? count_memcg_events+0xef/0x230
kernel: ? handle_mm_fault+0x1f0/0x2f0
kernel: ? do_user_addr_fault+0x2bb/0x7b0
kernel: ? do_syscall_64+0x94/0x5e0
kernel: ? exc_page_fault+0x75/0x160
kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e
kernel: RIP: 0033:0x7f815e134c8d
kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc
kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d
kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064
kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c
kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010
kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064
kernel: </TASK>
kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409.
To fix the issue, lift the locking out of the core of
aa_new_learning_profile(), introduce a wrapper function that takes the
lock where needed, and have build_change_hat() call the core function
that no longer takes the lock.
In addition fix 4 other issues introduced by commit
32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles")
- aa_get_profile_rcu() was replaced-by: aa_get_profile without the
accompanying rcu_dereference_protected()
- an extra aa_get_label(label) was introduced at the start of
change_hat() without an accompanying aa_put_label() causing a
reference count leak.
- a reference count leak was introduced in the label_is_stale(label)
case, where the newest profile would be leaked instead of the
label passed to the function.
- a potential UAF when the lookup walks up the tree with new_ns != ns
the new label refere
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope session state changes to bound connections
ksmbd_all_conn_set_status() treats every connection whose transient
binding flag is set as belonging to the target SessionId. A logoff or
session replacement can consequently move an unrelated connection to
NEED_RECONNECT or NEED_SETUP.
Pass the target session itself and select connections using either the
connection-local session xarray or the session's permanent channel list.
Use the same association test while waiting for requests to drain.
Serialize session-wide status changes under request_lock and do not
overwrite EXITING or RELEASING. Protect the shutdown transition with the
same lock so a concurrent session update cannot revive a closing
connection. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: avoid teardown retry loop on xarray allocation failure
__ublk_shmem_remove_ranges() removes matching maple tree ranges in
batches, but first stores each range into a temporary xarray so that the
pages can be unpinned after dropping the maple tree lock.
That temporary xarray is filled under the maple tree lock with
xa_store(..., GFP_ATOMIC). If the store fails before mas_erase(), the
current range is left in the tree and the helper returns false. The
outer ublk_shmem_remove_ranges() loop then immediately retries the same
range. While the atomic allocation keeps failing, the teardown path has
no forward progress.
The issue can be reproduced with radix_tree_node failslab injection after
a SHMEM_ZC buffer has already been registered:
# Kernel config:
# CONFIG_BLK_DEV_UBLK=y
# CONFIG_DEBUG_FS=y
# CONFIG_FAULT_INJECTION=y
# CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAILSLAB=y
echo 10 > /proc/sys/vm/nr_hugepages
mkdir -p /tmp/htlb
mount -t hugetlbfs none /tmp/htlb
fallocate -l 4M /tmp/htlb/ublk_buf
dev_id=$(kublk add -t null --shmem_zc \
--htlb /tmp/htlb/ublk_buf |
awk -F '[ :]' '/dev id/ {print $3}')
echo 1 > /sys/kernel/slab/radix_tree_node/failslab
echo Y > /sys/kernel/debug/failslab/cache-filter
echo Y > /sys/kernel/debug/failslab/ignore-gfp-wait
echo 1 > /sys/kernel/debug/failslab/interval
echo -1 > /sys/kernel/debug/failslab/times
echo 100 > /sys/kernel/debug/failslab/probability
kublk del -n "$dev_id"
On the unfixed kernel the delete command was still running after 3
seconds. Disabling failslab made it return. The fault-injection stack
showed:
should_failslab
kmem_cache_alloc_lru_noprof
__xas_nomem
__xa_store
xa_store
__ublk_shmem_remove_ranges
ublk_cdev_rel
ublk_ctrl_del_dev
Remove the allocation from the teardown loop. Keep the existing batch
limit, but collect {base_pfn, nr_pages} pairs in a fixed-size stack array.
Once a matching range is found, the range is erased from the maple tree
before dropping the lock, so each successful scan makes progress without
depending on any GFP_ATOMIC allocation.
With the same failslab settings, the fixed kernel completed
"kublk del -n $dev_id" successfully in about 45 ms. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: clear delay state when freeing policy data
iocg_kick_delay() turns sufficiently large debt into an explicit
block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to
-1 and incrementing blkcg->congestion_count. Clearing it again depends
on iocg_kick_delay() running from the period timer, the waitq timer or
the issue path.
ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq
timer, and no further bios can arrive, so once it has run nothing is
left which can reduce the debt and clear the delay. The blkcg stays
marked congested for the rest of its life.
blk_cgroup_congested() then returns true for every task in that cgroup
and its descendants: page_cache_sync_ra() cuts readahead to a single
page, page_cache_async_ra() skips it altogether, and
__folio_throttle_swaprate() takes swap_avail_lock and schedules a
throttle on anonymous folio allocation.
Clear it explicitly, after the list removal and the synchronous
hrtimer_cancel() so that neither timer processing nor an I/O path can
re-arm it. The free callback can also see policy data which was never
attached to a blkg, hence the pd->blkg check. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: use DEFINE_MUTEX for the file-scope mutex
In null_init(), mutex_init(&lock) currently happens after
configfs_register_subsystem(), which exposes the nullb subsystem to
userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach
null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is
initialized, trigger warning:
[ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301
[ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4
......
[ 123.154926] Call Trace:
[ 123.155172] <TASK>
[ 123.155419] ? __pfx_mutex_lock+0x10/0x10
[ 123.156181] ? __pfx__raw_spin_lock+0x10/0x10
[ 123.156571] nullb_group_make_group+0x20/0x100 [null_blk]
[ 123.157011] configfs_mkdir+0x47b/0xc70
[ 123.157337] ? __pfx_configfs_mkdir+0x10/0x10
[ 123.157719] ? may_create_dentry+0x242/0x2e0
[ 123.158061] vfs_mkdir+0x2a9/0x6c0
[ 123.158352] filename_mkdirat+0x3dc/0x500
[ 123.158710] ? __pfx_filename_mkdirat+0x10/0x10
[ 123.159070] ? strncpy_from_user+0x3a/0x1d0
[ 123.159413] __x64_sys_mkdir+0x6b/0x90
[ 123.159760] do_syscall_64+0xea/0x600
Replace the runtime mutex_init(&lock) with a static DEFINE_MUTEX(lock)
declaration to fix this issue. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. Prior to 1.7.2, SseController exposes the anonymous /sse/subscribe, /sse/broadcast, and /sse/close endpoints because ShiroFilter.addPublicPathFilters permits the SSE paths, and the endpoints trust the caller-controlled userId instead of deriving an identity from an authenticated principal. An unauthenticated caller can use /sse/subscribe to read another user's workflow events, approval requests, mentions, and alerts, use /sse/broadcast to inject SYSTEM_HEARTBEAT messages into another user's stream, or use /sse/close to terminate another user's channel. This vulnerability is fixed in 1.7.2. |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: nfcon: Do not call console_is_registered() in nfcon_device()
Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list
synchronization") show_cons_active() calls the .device() method under
the console_list_lock, but console_is_registered() tries to acquire
console_list_lock as well, causing a deadlock. It should not be
necessary to check console_is_registered() here since the function
should not be called in the fist place when the console is not
registered. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
| The Online Scheduling and Appointment Booking System WordPress plugin before 28.2 does not verify that the requester owns the AI booking-assistant conversation named in its unauthenticated conversation actions, allowing any unauthenticated visitor to read another visitor's assistant messages and to inject messages into their in-progress conversation. |
