| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in dromara orion-visor up to 2.5.7. Affected by this issue is the function ExposeApiAspect.beforeExposeApi of the file ExposeApiAspect.java. Executing a manipulation can lead to hard-coded credentials. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A security flaw has been discovered in Chengdu Qilu Technology Ludashi 6.1026.4715.714. Affected by this vulnerability is the function MessageNotifyCallback in the library ProtectFilter64.sys of the component Message Dispatch Handler. Performing a manipulation results in missing authorization. Attacking locally is a requirement. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. Affected is the function get_surge_subscription of the file services/subscription.py of the component Subscription Handler. Such manipulation of the argument key leads to improper access controls. The attack may be launched remotely. The exploit is publicly available and might be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was determined in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. This impacts an unknown function of the component Save Account Job. This manipulation causes race condition. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is said to be difficult. The exploit has been publicly disclosed and may be utilized. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte
name fields in the transport header alone. No check is made against the
net_device the frame arrived on.
This can cause a frame arriving on any netdev to be delivered to an AF_IUCV
socket. Three problems follow.
First, a frame arriving over HiperSockets can be delivered to a socket
bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL.
iucv_sock_bind() takes the classic path whenever the requested userid
matches iucv_userid, even on a guest that also has a HiperSockets device
carrying the same identifier. The child socket created by
afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and
transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV.
The socket delivered to accept() is unusable.
Second, a frame arriving on one netdev can be delivered to a socket bound
to a different IQD device. Which can lead to
- Accept-queue exhaustion (DoS)
- Attacker-controlled peer identity in the child socket
- Data injection into existing sockets
- Fabric noise on the IQD fabric, where bogus replies are sent
- killing established connections
Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls
sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a
namespace can be delivered to an IUCV socket. So a process in an
unprivileged user and network namespace holding only the CAP_NET_RAW
capability valid within that namespace can send a raw ETH_P_AF_IUCV frame
on its own lo device and have it matched against init_net sockets.
Fix all three by skipping any socket whose hs_dev does not match the
ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress
dev is never NULL, so classic sockets are skipped automatically. An unbound
HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket
is only reachable from the exact IQD device it was bound to. Because hs_dev
is always a device in init_net (iucv_sock_bind() scans
for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress
device belongs to another namespace never matches any socket.
Note that AF_IUCV over HiperSockets provides no per-connection
authentication: no sequence numbers, no TLS, no nonce. The four name fields
identifying a connection are exchanged in plaintext on the shared
HiperSockets segment (VCHID). Any host on the same HiperSockets segment
could spoof any frame type against an existing connection. That is a
protocol-level property unchanged by this patch. The fix reduces the attack
surface to peers present on the same HiperSockets segment. |
| A vulnerability was found in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. This affects the function doUpdateLicenseKey. The manipulation results in race condition. The attack can be launched remotely. The attack requires a high level of complexity. The exploitability is reported as difficult. The exploit has been made public and could be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability has been found in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. The impacted element is the function authorized. The manipulation of the argument SECRET_KEY leads to missing authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: si: Fix NULL pointer dereference after failed registration
try_smi_init() allocates new_smi->si_sm and later calls
ipmi_register_smi_mod(), which maps to ipmi_add_smi().
During ipmi_add_smi(), the upper IPMI message handler obtains the
initial BMC device information through __bmc_get_device_id(). This can
fail if the BMC does not return a successful response to the Get Device
ID command.
When the BMC returns a nonzero completion code, the device-id helper
retries the command and eventually returns -EIO if the device ID still
cannot be fetched.
On this failure path, ipmi_add_smi() logs "Unable to get the device id"
and goes to out_err_started, where it invokes the lower driver's
shutdown callback. try_smi_init() then logs the returned registration
failure:
ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5
ipmi_si IPI0001:00: Unable to register device: error -5
For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up
the SI state machine data, frees smi_info->si_sm, and sets
smi_info->si_sm and smi_info->intf to NULL.
However, intf->in_shutdown is not set on this failed-registration
rollback path. Therefore, the asynchronous redo_bmc_reg work item can
still retry BMC device-id probing after the lower driver has already
cleared its SI state machine data. In the observed case, that retry path
reached start_next_msg(), which passed the NULL smi_info->si_sm pointer
to the selected KCS state machine handler:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
Workqueue: events redo_bmc_reg [ipmi_msghandler]
RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si]
Call Trace:
start_next_msg+0x50/0x80 [ipmi_si]
check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si]
sender+0x69/0x80 [ipmi_si]
i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler]
__get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler]
__bmc_get_device_id+0xef/0x950 [ipmi_msghandler]
redo_bmc_reg+0x52/0x60 [ipmi_msghandler]
process_one_work+0x1a7/0x360
Set intf->in_shutdown on the out_err_started path before invoking the
lower driver's shutdown callback. This prevents later redo_bmc_reg
retries from using an interface whose lower driver state has been
cleaned up, and applies the same shutdown state to other IPMI interfaces
as well. |
| A flaw has been found in Chengdu Qilu Technology Ludashi 6.1026.4715.714. The affected element is the function sub_11008 in the library ComputerZ_x64.sys. Executing a manipulation of the argument PhysicalAddress can lead to information disclosure. The attack needs to be launched locally. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The rtMedia for WordPress, BuddyPress and bbPress plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'compare' parameter in all versions up to, and including, 4.7.11 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is exploitable on any public page containing an rtMedia shortcode (e.g., [rtmedia_gallery]) when the rtmedia_shortcode GET parameter is set, because RTMediaQuery::query() merges $_REQUEST into the internal query while only validating top-level array keys, allowing the nested 'compare' subvalue to reach the vulnerable sink without authentication. |
| MCPHub before 1.0.32 contains an authentication bypass vulnerability in its embedded OAuth 2.0 authorization server where client authentication is disabled by default and PKCE enforcement is optional. Attackers who obtain an authorization code through interception can redeem it for access tokens without providing a client secret or PKCE verifier, gaining access to victim accounts and their privileges. |
| A vulnerability was detected in stilleshan ServerStatus 1.0/2.0. Impacted is an unknown function of the file server/src/main.cpp of the component Stats Generation. Performing a manipulation of the argument custom results in cross site scripting. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A memory corruption vulnerability exists in FFmpeg before 8.1. The RTP encoding process. In the nal_send function in libavformat/rtpenc_h264_hevc.c, a negative size parameter (size=-3) is passed to memcpy when transmitting H.264/HEVC streams via RTP using a crafted input file. This was detected using AddressSanitizer. |
| A security vulnerability has been detected in lenve vhr 1.0-SNAPSHOT. This issue affects the function HrInfoController.updateHr of the file HrMapper.xml. Such manipulation of the argument Password leads to improper privilege management. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. |
| A weakness has been identified in lenve vhr 1.0-SNAPSHOT. This vulnerability affects the function FastDFSUtils.upload of the file /hr/userface of the component Avatar Upload. This manipulation of the argument File causes unrestricted upload. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| vLLM versions >=0.10.2 and <0.28.0 do not apply any audio decode-size or duration limit when extracting audio from video input for NanoNemotronVL models. In nano_nemotron_vl.py, _extract_audio_from_videos calls load_audio_pyav(BytesIO(video_bytes)) without the max_duration_s or max_decode_bytes parameters, so neither VLLM_MAX_AUDIO_DECODE_DURATION_S nor VLLM_MAX_AUDIO_DECODE_BYTES is enforced (unlike the direct audio upload path in AudioMediaIO). When a NanoNemotronVL model is served with use_audio_in_video=True, an attacker who supplies a small, highly compressed video as multimodal input can force the server to allocate gigabytes of memory during audio decoding, resulting in a denial of service. Fixed in vLLM 0.28.0. |
| Concrete CMS 9 through 9.5.2 is vulnerable to Missing Authorization in the block alias route (Process::alias() in concrete/controllers/backend/block/process.php).It does not verify that the referenced block is genuinely orphaned on the target page, nor that the caller holds any permission over the source block. A user granted only an area-scoped add_block_to_area delegation on their own page can therefore pass any block ID on the site: the source block's content is duplicated into an area the rogue editor controls, disclosing that content, and the original block is then force-deleted in the same request, destroying arbitrary site content. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 5.9 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:N/VC:N/VI:H/VA:H/SC:N/SI:N/SA:N. Thanks Yonatan Drori from Tenzai for reporting. |
| A security flaw has been discovered in lenve vhr 1.0-SNAPSHOT. This affects the function HrInfoController.updatePass of the file /hr/pass of the component Password Update Handler. The manipulation of the argument hrid results in improper authorization. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
