| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF of alloc->vma in race with munmap()
[ cmllamas: clean forward port from commit 015ac18be7de ("binder: fix
UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed
in mainline after the revert of commit a43cfc87caaf ("android: binder:
stop saving a pointer to the VMA") as pointed out by Liam. The commit
log and tags have been tweaked to reflect this. ]
In commit 720c24192404 ("ANDROID: binder: change down_write to
down_read") binder assumed the mmap read lock is sufficient to protect
alloc->vma inside binder_update_page_range(). This used to be accurate
until commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap"), which now downgrades the mmap_lock after detaching the vma
from the rbtree in munmap(). Then it proceeds to teardown and free the
vma with only the read lock held.
This means that accesses to alloc->vma in binder_update_page_range() now
will race with vm_area_free() in munmap() and can cause a UAF as shown
in the following KASAN trace:
==================================================================
BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0
Read of size 8 at addr ffff16204ad00600 by task server/558
CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2a0
show_stack+0x18/0x2c
dump_stack+0xf8/0x164
print_address_description.constprop.0+0x9c/0x538
kasan_report+0x120/0x200
__asan_load8+0xa0/0xc4
vm_insert_page+0x7c/0x1f0
binder_update_page_range+0x278/0x50c
binder_alloc_new_buf+0x3f0/0xba0
binder_transaction+0x64c/0x3040
binder_thread_write+0x924/0x2020
binder_ioctl+0x1610/0x2e5c
__arm64_sys_ioctl+0xd4/0x120
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
Allocated by task 559:
kasan_save_stack+0x38/0x6c
__kasan_kmalloc.constprop.0+0xe4/0xf0
kasan_slab_alloc+0x18/0x2c
kmem_cache_alloc+0x1b0/0x2d0
vm_area_alloc+0x28/0x94
mmap_region+0x378/0x920
do_mmap+0x3f0/0x600
vm_mmap_pgoff+0x150/0x17c
ksys_mmap_pgoff+0x284/0x2dc
__arm64_sys_mmap+0x84/0xa4
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
Freed by task 560:
kasan_save_stack+0x38/0x6c
kasan_set_track+0x28/0x40
kasan_set_free_info+0x24/0x4c
__kasan_slab_free+0x100/0x164
kasan_slab_free+0x14/0x20
kmem_cache_free+0xc4/0x34c
vm_area_free+0x1c/0x2c
remove_vma+0x7c/0x94
__do_munmap+0x358/0x710
__vm_munmap+0xbc/0x130
__arm64_sys_munmap+0x4c/0x64
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
[...]
==================================================================
To prevent the race above, revert back to taking the mmap write lock
inside binder_update_page_range(). One might expect an increase of mmap
lock contention. However, binder already serializes these calls via top
level alloc->mutex. Also, there was no performance impact shown when
running the binder benchmark tests. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't free qgroup space unless specified
Boris noticed in his simple quotas testing that he was getting a leak
with Sweet Tea's change to subvol create that stopped doing a
transaction commit. This was just a side effect of that change.
In the delayed inode code we have an optimization that will free extra
reservations if we think we can pack a dir item into an already modified
leaf. Previously this wouldn't be triggered in the subvolume create
case because we'd commit the transaction, it was still possible but
much harder to trigger. It could actually be triggered if we did a
mkdir && subvol create with qgroups enabled.
This occurs because in btrfs_insert_delayed_dir_index(), which gets
called when we're adding the dir item, we do the following:
btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL);
if we're able to skip reserving space.
The problem here is that trans->block_rsv points at the temporary block
rsv for the subvolume create, which has qgroup reservations in the block
rsv.
This is a problem because btrfs_block_rsv_release() will do the
following:
if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) {
qgroup_to_release = block_rsv->qgroup_rsv_reserved -
block_rsv->qgroup_rsv_size;
block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size;
}
The temporary block rsv just has ->qgroup_rsv_reserved set,
->qgroup_rsv_size == 0. The optimization in
btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then
later on when we call btrfs_subvolume_release_metadata() which has
btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release);
btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release);
qgroup_to_release is set to 0, and we do not convert the reserved
metadata space.
The problem here is that the block rsv code has been unconditionally
messing with ->qgroup_rsv_reserved, because the main place this is used
is delalloc, and any time we call btrfs_block_rsv_release() we do it
with qgroup_to_release set, and thus do the proper accounting.
The subvolume code is the only other code that uses the qgroup
reservation stuff, but it's intermingled with the above optimization,
and thus was getting its reservation freed out from underneath it and
thus leaking the reserved space.
The solution is to simply not mess with the qgroup reservations if we
don't have qgroup_to_release set. This works with the existing code as
anything that messes with the delalloc reservations always have
qgroup_to_release set. This fixes the leak that Boris was observing. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: fix kernel panic at qmu transfer done irq handler
When handle qmu transfer irq, it will unlock @mtu->lock before give back
request, if another thread handle disconnect event at the same time, and
try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu
irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before
handling it.
e.g.
qmu done irq on cpu0 thread running on cpu1
qmu_done_tx()
handle gpd [0]
mtu3_requ_complete() mtu3_gadget_ep_disable()
unlock @mtu->lock
give back request lock @mtu->lock
mtu3_ep_disable()
mtu3_gpd_ring_free()
unlock @mtu->lock
lock @mtu->lock
get next gpd [1]
[1]: goto [0] to handle next gpd, and next gpd may be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_sdei: Fix sleep from invalid context BUG
Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra
triggers:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by cpuhp/0/24:
#0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
#1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
#2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130
irq event stamp: 36
hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0
hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248
softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...]
Hardware name: WIWYNN Mt.Jade Server [...]
Call trace:
dump_backtrace+0x114/0x120
show_stack+0x20/0x70
dump_stack_lvl+0x9c/0xd8
dump_stack+0x18/0x34
__might_resched+0x188/0x228
rt_spin_lock+0x70/0x120
sdei_cpuhp_up+0x3c/0x130
cpuhp_invoke_callback+0x250/0xf08
cpuhp_thread_fun+0x120/0x248
smpboot_thread_fn+0x280/0x320
kthread+0x130/0x140
ret_from_fork+0x10/0x20
sdei_cpuhp_up() is called in the STARTING hotplug section,
which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry
instead to execute the cpuhp cb later, with preemption enabled.
SDEI originally got its own cpuhp slot to allow interacting
with perf. It got superseded by pNMI and this early slot is not
relevant anymore. [1]
Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the
calling CPU. It is checked that preemption is disabled for them.
_ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'.
Preemption is enabled in those threads, but their cpumask is limited
to 1 CPU.
Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb
don't trigger them.
Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call
which acts on the calling CPU.
[1]:
https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix possible memory leak in smb2_lock()
argv needs to be free when setup_async_work fails or when the current
process is woken up. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix iso_conn related locking and validity issues
sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.
Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.
iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.
This should not reintroduce the issue fixed in commit 241f51931c35
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.
Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.
iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).
Trace with iso_conn_del after iso_chan_add in iso_connect_cis:
===============================================================
iso_sock_create:771: sock 00000000be9b69b7
iso_sock_init:693: sk 000000004dff667e
iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_connect:875: sk 000000004dff667e
iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da
iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e
__iso_chan_add:214: conn 00000000daf8625e
iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12
iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16
iso_sock_clear_timer:117: sock 000000004dff667e state 3
<Note: sk_state is BT_BOUND (3), so iso_connect_cis is still
running at this point>
iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16
hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535
hci_conn_unlink:1102: hci0: hcon 000000007b65d182
hci_chan_list_flush:2780: hcon 000000007b65d182
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1
__iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7
<Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets
BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it
must be that iso_chan_del occurred between iso_chan_add and end of
iso_connect_cis.>
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth
===============================================================
Trace with iso_conn_del before iso_chan_add in iso_connect_cis:
===============================================================
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504
hci_dev_put:1487: hci0 orig refcnt 21
hci_event_packet:7607: hci0: e
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
zsmalloc: move LRU update from zs_map_object() to zs_malloc()
Under memory pressure, we sometimes observe the following crash:
[ 5694.832838] ------------[ cut here ]------------
[ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100)
[ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80
[ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1
[ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021
[ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80
[ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7
[ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246
[ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000
[ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480
[ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370
[ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002
[ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240
[ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000
[ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0
[ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5695.207197] PKRU: 55555554
[ 5695.212602] Call Trace:
[ 5695.217486] <TASK>
[ 5695.221674] zs_map_object+0x91/0x270
[ 5695.229000] zswap_frontswap_store+0x33d/0x870
[ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0
[ 5695.245899] __frontswap_store+0x51/0xb0
[ 5695.253742] swap_writepage+0x3c/0x60
[ 5695.261063] shrink_page_list+0x738/0x1230
[ 5695.269255] shrink_lruvec+0x5ec/0xcd0
[ 5695.276749] ? shrink_slab+0x187/0x5f0
[ 5695.284240] ? mem_cgroup_iter+0x6e/0x120
[ 5695.292255] shrink_node+0x293/0x7b0
[ 5695.299402] do_try_to_free_pages+0xea/0x550
[ 5695.307940] try_to_free_pages+0x19a/0x490
[ 5695.316126] __folio_alloc+0x19ff/0x3e40
[ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.332681] ? walk_component+0x2a8/0xb50
[ 5695.340697] ? generic_permission+0xda/0x2a0
[ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.357940] ? walk_component+0x2a8/0xb50
[ 5695.365955] vma_alloc_folio+0x10e/0x570
[ 5695.373796] ? walk_component+0x52/0xb50
[ 5695.381634] wp_page_copy+0x38c/0xc10
[ 5695.388953] ? filename_lookup+0x378/0xbc0
[ 5695.397140] handle_mm_fault+0x87f/0x1800
[ 5695.405157] do_user_addr_fault+0x1bd/0x570
[ 5695.413520] exc_page_fault+0x5d/0x110
[ 5695.421017] asm_exc_page_fault+0x22/0x30
After some investigation, I have found the following issue: unlike other
zswap backends, zsmalloc performs the LRU list update at the object
mapping time, rather than when the slot for the object is allocated.
This deviation was discussed and agreed upon during the review process
of the zsmalloc writeback patch series:
https://lore.kernel.org/lkml/Y3flcAXNxxrvy3ZH@cmpxchg.org/
Unfortunately, this introduces a subtle bug that occurs when there is a
concurrent store and reclaim, which interleave as follows:
zswap_frontswap_store() shrink_worker()
zs_malloc() zs_zpool_shrink()
spin_lock(&pool->lock) zs_reclaim_page()
zspage = find_get_zspage()
spin_unlock(&pool->lock)
spin_lock(&pool->lock)
zspage = list_first_entry(&pool->lru)
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: mm: Move initrd phys_to_virt handling after paging_init()
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Prevent shift wrapping in set_user_sq_size()
The ucmd->log_sq_bb_count variable is controlled by the user so this
shift can wrap. Fix it by using check_shl_overflow() in the same way
that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined
behavior in hns_roce_set_user_sq_size()"). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix memory leak in mlx5e_ptp_open
When kvzalloc_node or kvzalloc failed in mlx5e_ptp_open, the memory
pointed by "c" or "cparams" is not freed, which can lead to a memory
leak. Fix by freeing the array in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Fix linking a duplicate key to a keyring's assoc_array
When making a DNS query inside the kernel using dns_query(), the request
code can in rare cases end up creating a duplicate index key in the
assoc_array of the destination keyring. It is eventually found by
a BUG_ON() check in the assoc_array implementation and results in
a crash.
Example report:
[2158499.700025] kernel BUG at ../lib/assoc_array.c:652!
[2158499.700039] invalid opcode: 0000 [#1] SMP PTI
[2158499.700065] CPU: 3 PID: 31985 Comm: kworker/3:1 Kdump: loaded Not tainted 5.3.18-150300.59.90-default #1 SLE15-SP3
[2158499.700096] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
[2158499.700351] Workqueue: cifsiod cifs_resolve_server [cifs]
[2158499.700380] RIP: 0010:assoc_array_insert+0x85f/0xa40
[2158499.700401] Code: ff 74 2b 48 8b 3b 49 8b 45 18 4c 89 e6 48 83 e7 fe e8 95 ec 74 00 3b 45 88 7d db 85 c0 79 d4 0f 0b 0f 0b 0f 0b e8 41 f2 be ff <0f> 0b 0f 0b 81 7d 88 ff ff ff 7f 4c 89 eb 4c 8b ad 58 ff ff ff 0f
[2158499.700448] RSP: 0018:ffffc0bd6187faf0 EFLAGS: 00010282
[2158499.700470] RAX: ffff9f1ea7da2fe8 RBX: ffff9f1ea7da2fc1 RCX: 0000000000000005
[2158499.700492] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000
[2158499.700515] RBP: ffffc0bd6187fbb0 R08: ffff9f185faf1100 R09: 0000000000000000
[2158499.700538] R10: ffff9f1ea7da2cc0 R11: 000000005ed8cec8 R12: ffffc0bd6187fc28
[2158499.700561] R13: ffff9f15feb8d000 R14: ffff9f1ea7da2fc0 R15: ffff9f168dc0d740
[2158499.700585] FS: 0000000000000000(0000) GS:ffff9f185fac0000(0000) knlGS:0000000000000000
[2158499.700610] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2158499.700630] CR2: 00007fdd94fca238 CR3: 0000000809d8c006 CR4: 00000000003706e0
[2158499.700702] Call Trace:
[2158499.700741] ? key_alloc+0x447/0x4b0
[2158499.700768] ? __key_link_begin+0x43/0xa0
[2158499.700790] __key_link_begin+0x43/0xa0
[2158499.700814] request_key_and_link+0x2c7/0x730
[2158499.700847] ? dns_resolver_read+0x20/0x20 [dns_resolver]
[2158499.700873] ? key_default_cmp+0x20/0x20
[2158499.700898] request_key_tag+0x43/0xa0
[2158499.700926] dns_query+0x114/0x2ca [dns_resolver]
[2158499.701127] dns_resolve_server_name_to_ip+0x194/0x310 [cifs]
[2158499.701164] ? scnprintf+0x49/0x90
[2158499.701190] ? __switch_to_asm+0x40/0x70
[2158499.701211] ? __switch_to_asm+0x34/0x70
[2158499.701405] reconn_set_ipaddr_from_hostname+0x81/0x2a0 [cifs]
[2158499.701603] cifs_resolve_server+0x4b/0xd0 [cifs]
[2158499.701632] process_one_work+0x1f8/0x3e0
[2158499.701658] worker_thread+0x2d/0x3f0
[2158499.701682] ? process_one_work+0x3e0/0x3e0
[2158499.701703] kthread+0x10d/0x130
[2158499.701723] ? kthread_park+0xb0/0xb0
[2158499.701746] ret_from_fork+0x1f/0x40
The situation occurs as follows:
* Some kernel facility invokes dns_query() to resolve a hostname, for
example, "abcdef". The function registers its global DNS resolver
cache as current->cred.thread_keyring and passes the query to
request_key_net() -> request_key_tag() -> request_key_and_link().
* Function request_key_and_link() creates a keyring_search_context
object. Its match_data.cmp method gets set via a call to
type->match_preparse() (resolves to dns_resolver_match_preparse()) to
dns_resolver_cmp().
* Function request_key_and_link() continues and invokes
search_process_keyrings_rcu() which returns that a given key was not
found. The control is then passed to request_key_and_link() ->
construct_alloc_key().
* Concurrently to that, a second task similarly makes a DNS query for
"abcdef." and its result gets inserted into the DNS resolver cache.
* Back on the first task, function construct_alloc_key() first runs
__key_link_begin() to determine an assoc_array_edit operation to
insert a new key. Index keys in the array are compared exactly as-is,
using keyring_compare_object(). The operation
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory leak of iter->temp when reading trace_pipe
kmemleak reports:
unreferenced object 0xffff88814d14e200 (size 256):
comm "cat", pid 336, jiffies 4294871818 (age 779.490s)
hex dump (first 32 bytes):
04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00 ................
0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff .........Z......
backtrace:
[<ffffffff9bdff18f>] __kmalloc+0x4f/0x140
[<ffffffff9bc9238b>] trace_find_next_entry+0xbb/0x1d0
[<ffffffff9bc9caef>] trace_print_lat_context+0xaf/0x4e0
[<ffffffff9bc94490>] print_trace_line+0x3e0/0x950
[<ffffffff9bc95499>] tracing_read_pipe+0x2d9/0x5a0
[<ffffffff9bf03a43>] vfs_read+0x143/0x520
[<ffffffff9bf04c2d>] ksys_read+0xbd/0x160
[<ffffffff9d0f0edf>] do_syscall_64+0x3f/0x90
[<ffffffff9d2000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
when reading file 'trace_pipe', 'iter->temp' is allocated or relocated
in trace_find_next_entry() but not freed before 'trace_pipe' is closed.
To fix it, free 'iter->temp' in tracing_release_pipe(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.
A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.
If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_event_output
We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.
The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.
This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:
BUG: kernel NULL pointer dereference, address: 0000000000000001
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
...
? perf_output_sample+0x12a/0x9a0
? finish_task_switch.isra.0+0x81/0x280
? perf_event_output+0x66/0xa0
? bpf_event_output+0x13a/0x190
? bpf_event_output_data+0x22/0x40
? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
? xa_load+0x87/0xe0
? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
? release_sock+0x3e/0x90
? sk_setsockopt+0x1a1/0x12f0
? udp_pre_connect+0x36/0x50
? inet_dgram_connect+0x93/0xa0
? __sys_connect+0xb4/0xe0
? udp_setsockopt+0x27/0x40
? __pfx_udp_push_pending_frames+0x10/0x10
? __sys_setsockopt+0xdf/0x1a0
? __x64_sys_connect+0xf/0x20
? do_syscall_64+0x3a/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixing this by disabling preemption in bpf_event_output.
[1] https://github.com/cilium/cilium/issues/26756 |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd
group->iommufd is not initialized for the iommufd_ctx_put()
[20018.331541] BUG: kernel NULL pointer dereference, address: 0000000000000000
[20018.377508] RIP: 0010:iommufd_ctx_put+0x5/0x10 [iommufd]
...
[20018.476483] Call Trace:
[20018.479214] <TASK>
[20018.481555] vfio_group_fops_unl_ioctl+0x506/0x690 [vfio]
[20018.487586] __x64_sys_ioctl+0x6a/0xb0
[20018.491773] ? trace_hardirqs_on+0xc5/0xe0
[20018.496347] do_syscall_64+0x67/0x90
[20018.500340] entry_SYSCALL_64_after_hwframe+0x4b/0xb5 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
The xiic_xfer() function gets a runtime PM reference when the function is
entered. This reference is released when the function is exited. There is
currently one error path where the function exits directly, which leads to
a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: stricter state check in mptcp_worker
As reported by Christoph, the mptcp protocol can run the
worker when the relevant msk socket is in an unexpected state:
connect()
// incoming reset + fastclose
// the mptcp worker is scheduled
mptcp_disconnect()
// msk is now CLOSED
listen()
mptcp_worker()
Leading to the following splat:
divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018
RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004
RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000
R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_select_window net/ipv4/tcp_output.c:262 [inline]
__tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459
mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline]
mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705
process_one_work+0x3bd/0x950 kernel/workqueue.c:2390
worker_thread+0x5b/0x610 kernel/workqueue.c:2537
kthread+0x138/0x170 kernel/kthread.c:376
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
This change addresses the issue explicitly checking for bad states
before running the mptcp worker. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Array index may go out of bound
Klocwork reports array 'vha->host_str' of size 16 may use index value(s)
16..19. Use snprintf() instead of sprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle case when repair happens with dev-replace
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix issue in verifying allow_ptr_leaks
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A simple reproducer as follows,
SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}
Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.
Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.
[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/ |
