| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix device use-after-free on unbind
A recent change fixed device reference leaks when looking up drm
platform device driver data during bind() but failed to remove a partial
fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix
kobject put for component sub-drivers").
This results in a reference imbalance on component bind() failures and
on unbind() which could lead to a user-after-free.
Make sure to only drop the references after retrieving the driver data
by effectively reverting the previous partial fix.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: slimbus: fix bus_context pointer in regmap init calls
Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
[Cc stable] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in smb2_close_cached_fid()
find_or_create_cached_dir() could grab a new reference after kref_put()
had seen the refcount drop to zero but before cfid_list_lock is acquired
in smb2_close_cached_fid(), leading to use-after-free.
Switch to kref_put_lock() so cfid_release() is called with
cfid_list_lock held, closing that gap. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
[phasta: commit message nits] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix mmap write lock not release
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix infinite loop in __insert_extent_tree()
When we get wrong extent info data, and look up extent_node in rb tree,
it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by
return NULL and print some kernel messages in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate userq buffer virtual address and size
It needs to validate the userq object virtual address to
determine whether it is residented in a valid vm mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Do not share the name pointer between components
By sharing 'name' directly, tearing down components may lead to
use-after-free errors. Duplicate the name to avoid that.
At the same time, update the order of operations - since commit
cee28113db17 ("ASoC: dmaengine_pcm: Allow passing component name via
config") the framework does not override component->name if set before
invoking the initializer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix nullptr err of vm_handle_moved
If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL.
So, such kind of amdgpu_bo_va should be updated separately before
amdgpu_vm_handle_moved. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix oops in xe_gem_fault when running core_hotunplug test.
I saw an oops in xe_gem_fault when running the xe-fast-feedback
testlist against the realtime kernel without debug options enabled.
The panic happens after core_hotunplug unbind-rebind finishes.
Presumably what happens is that a process mmaps, unlocks because
of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left,
causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since
there was nothing left to populate, and then oopses in
"mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource
is NULL.
It's convoluted, but fits the data and explains the oops after
the test exits. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: use lock accessing port_state and rport state
nvme_fc_unregister_remote removes the remote port on a lport object at
any point in time when there is no active association. This races with
with the reconnect logic, because nvme_fc_create_association is not
taking a lock to check the port_state and atomically increase the
active count on the rport. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio
stream while period-elapsed work services its IRQs. As the former
frees the DAI's private context, these two operations shall be
synchronized to avoid slab-use-after-free or worse errors. |
| In the Linux kernel, the following vulnerability has been resolved:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate(). |
| In the Linux kernel, the following vulnerability has been resolved:
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: validate record offset in hfsplus_bmap_alloc
hfsplus_bmap_alloc can trigger a crash if a
record offset or length is larger than node_size
[ 15.264282] BUG: KASAN: slab-out-of-bounds in hfsplus_bmap_alloc+0x887/0x8b0
[ 15.265192] Read of size 8 at addr ffff8881085ca188 by task test/183
[ 15.265949]
[ 15.266163] CPU: 0 UID: 0 PID: 183 Comm: test Not tainted 6.17.0-rc2-gc17b750b3ad9 #14 PREEMPT(voluntary)
[ 15.266165] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 15.266167] Call Trace:
[ 15.266168] <TASK>
[ 15.266169] dump_stack_lvl+0x53/0x70
[ 15.266173] print_report+0xd0/0x660
[ 15.266181] kasan_report+0xce/0x100
[ 15.266185] hfsplus_bmap_alloc+0x887/0x8b0
[ 15.266208] hfs_btree_inc_height.isra.0+0xd5/0x7c0
[ 15.266217] hfsplus_brec_insert+0x870/0xb00
[ 15.266222] __hfsplus_ext_write_extent+0x428/0x570
[ 15.266225] __hfsplus_ext_cache_extent+0x5e/0x910
[ 15.266227] hfsplus_ext_read_extent+0x1b2/0x200
[ 15.266233] hfsplus_file_extend+0x5a7/0x1000
[ 15.266237] hfsplus_get_block+0x12b/0x8c0
[ 15.266238] __block_write_begin_int+0x36b/0x12c0
[ 15.266251] block_write_begin+0x77/0x110
[ 15.266252] cont_write_begin+0x428/0x720
[ 15.266259] hfsplus_write_begin+0x51/0x100
[ 15.266262] cont_write_begin+0x272/0x720
[ 15.266270] hfsplus_write_begin+0x51/0x100
[ 15.266274] generic_perform_write+0x321/0x750
[ 15.266285] generic_file_write_iter+0xc3/0x310
[ 15.266289] __kernel_write_iter+0x2fd/0x800
[ 15.266296] dump_user_range+0x2ea/0x910
[ 15.266301] elf_core_dump+0x2a94/0x2ed0
[ 15.266320] vfs_coredump+0x1d85/0x45e0
[ 15.266349] get_signal+0x12e3/0x1990
[ 15.266357] arch_do_signal_or_restart+0x89/0x580
[ 15.266362] irqentry_exit_to_user_mode+0xab/0x110
[ 15.266364] asm_exc_page_fault+0x26/0x30
[ 15.266366] RIP: 0033:0x41bd35
[ 15.266367] Code: bc d1 f3 0f 7f 27 f3 0f 7f 6f 10 f3 0f 7f 77 20 f3 0f 7f 7f 30 49 83 c0 0f 49 29 d0 48 8d 7c 17 31 e9 9f 0b 00 00 66 0f ef c0 <f3> 0f 6f 0e f3 0f 6f 56 10 66 0f 74 c1 66 0f d7 d0 49 83 f8f
[ 15.266369] RSP: 002b:00007ffc9e62d078 EFLAGS: 00010283
[ 15.266371] RAX: 00007ffc9e62d100 RBX: 0000000000000000 RCX: 0000000000000000
[ 15.266372] RDX: 00000000000000e0 RSI: 0000000000000000 RDI: 00007ffc9e62d100
[ 15.266373] RBP: 0000400000000040 R08: 00000000000000e0 R09: 0000000000000000
[ 15.266374] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 15.266375] R13: 0000000000000000 R14: 0000000000000000 R15: 0000400000000000
[ 15.266376] </TASK>
When calling hfsplus_bmap_alloc to allocate a free node, this function
first retrieves the bitmap from header node and map node using node->page
together with the offset and length from hfs_brec_lenoff
```
len = hfs_brec_lenoff(node, 2, &off16);
off = off16;
off += node->page_offset;
pagep = node->page + (off >> PAGE_SHIFT);
data = kmap_local_page(*pagep);
```
However, if the retrieved offset or length is invalid(i.e. exceeds
node_size), the code may end up accessing pages outside the allocated
range for this node.
This patch adds proper validation of both offset and length before use,
preventing out-of-bounds page access. Move is_bnode_offset_valid and
check_and_correct_requested_length to hfsplus_fs.h, as they may be
required by other functions. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat()
The syzbot reported issue in hfsplus_delete_cat():
[ 70.682285][ T9333] =====================================================
[ 70.682943][ T9333] BUG: KMSAN: uninit-value in hfsplus_subfolders_dec+0x1d7/0x220
[ 70.683640][ T9333] hfsplus_subfolders_dec+0x1d7/0x220
[ 70.684141][ T9333] hfsplus_delete_cat+0x105d/0x12b0
[ 70.684621][ T9333] hfsplus_rmdir+0x13d/0x310
[ 70.685048][ T9333] vfs_rmdir+0x5ba/0x810
[ 70.685447][ T9333] do_rmdir+0x964/0xea0
[ 70.685833][ T9333] __x64_sys_rmdir+0x71/0xb0
[ 70.686260][ T9333] x64_sys_call+0xcd8/0x3cf0
[ 70.686695][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.687119][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.687646][ T9333]
[ 70.687856][ T9333] Uninit was stored to memory at:
[ 70.688311][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0
[ 70.688779][ T9333] hfsplus_create_cat+0x148e/0x1800
[ 70.689231][ T9333] hfsplus_mknod+0x27f/0x600
[ 70.689730][ T9333] hfsplus_mkdir+0x5a/0x70
[ 70.690146][ T9333] vfs_mkdir+0x483/0x7a0
[ 70.690545][ T9333] do_mkdirat+0x3f2/0xd30
[ 70.690944][ T9333] __x64_sys_mkdir+0x9a/0xf0
[ 70.691380][ T9333] x64_sys_call+0x2f89/0x3cf0
[ 70.691816][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.692229][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.692773][ T9333]
[ 70.692990][ T9333] Uninit was stored to memory at:
[ 70.693469][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0
[ 70.693960][ T9333] hfsplus_create_cat+0x148e/0x1800
[ 70.694438][ T9333] hfsplus_fill_super+0x21c1/0x2700
[ 70.694911][ T9333] mount_bdev+0x37b/0x530
[ 70.695320][ T9333] hfsplus_mount+0x4d/0x60
[ 70.695729][ T9333] legacy_get_tree+0x113/0x2c0
[ 70.696167][ T9333] vfs_get_tree+0xb3/0x5c0
[ 70.696588][ T9333] do_new_mount+0x73e/0x1630
[ 70.697013][ T9333] path_mount+0x6e3/0x1eb0
[ 70.697425][ T9333] __se_sys_mount+0x733/0x830
[ 70.697857][ T9333] __x64_sys_mount+0xe4/0x150
[ 70.698269][ T9333] x64_sys_call+0x2691/0x3cf0
[ 70.698704][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.699117][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.699730][ T9333]
[ 70.699946][ T9333] Uninit was created at:
[ 70.700378][ T9333] __alloc_pages_noprof+0x714/0xe60
[ 70.700843][ T9333] alloc_pages_mpol_noprof+0x2a2/0x9b0
[ 70.701331][ T9333] alloc_pages_noprof+0xf8/0x1f0
[ 70.701774][ T9333] allocate_slab+0x30e/0x1390
[ 70.702194][ T9333] ___slab_alloc+0x1049/0x33a0
[ 70.702635][ T9333] kmem_cache_alloc_lru_noprof+0x5ce/0xb20
[ 70.703153][ T9333] hfsplus_alloc_inode+0x5a/0xd0
[ 70.703598][ T9333] alloc_inode+0x82/0x490
[ 70.703984][ T9333] iget_locked+0x22e/0x1320
[ 70.704428][ T9333] hfsplus_iget+0x5c/0xba0
[ 70.704827][ T9333] hfsplus_btree_open+0x135/0x1dd0
[ 70.705291][ T9333] hfsplus_fill_super+0x1132/0x2700
[ 70.705776][ T9333] mount_bdev+0x37b/0x530
[ 70.706171][ T9333] hfsplus_mount+0x4d/0x60
[ 70.706579][ T9333] legacy_get_tree+0x113/0x2c0
[ 70.707019][ T9333] vfs_get_tree+0xb3/0x5c0
[ 70.707444][ T9333] do_new_mount+0x73e/0x1630
[ 70.707865][ T9333] path_mount+0x6e3/0x1eb0
[ 70.708270][ T9333] __se_sys_mount+0x733/0x830
[ 70.708711][ T9333] __x64_sys_mount+0xe4/0x150
[ 70.709158][ T9333] x64_sys_call+0x2691/0x3cf0
[ 70.709630][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.710053][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.710611][ T9333]
[ 70.710842][ T9333] CPU: 3 UID: 0 PID: 9333 Comm: repro Not tainted 6.12.0-rc6-dirty #17
[ 70.711568][ T9333] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 70.712490][ T9333] =====================================================
[ 70.713085][ T9333] Disabling lock debugging due to kernel taint
[ 70.713618][ T9333] Kernel panic - not syncing: kmsan.panic set ...
[ 70.714159][ T9333]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting
the following warning when the BlueField-3 SOC is booted:
BUG: key ffff00008a3402a8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0
<snip>
Call trace:
lockdep_init_map_type+0x1d4/0x2a0
__kernfs_create_file+0x84/0x140
sysfs_add_file_mode_ns+0xcc/0x1cc
internal_create_group+0x110/0x3d4
internal_create_groups.part.0+0x54/0xcc
sysfs_create_groups+0x24/0x40
device_add+0x6e8/0x93c
device_register+0x28/0x40
__hwmon_device_register+0x4b0/0x8a0
devm_hwmon_device_register_with_groups+0x7c/0xe0
mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc]
platform_probe+0x70/0x110
The mlxbf_pmc driver must call sysfs_attr_init() during the
initialization of the "count_clock" data structure to avoid
this warning. |
