| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device. |
| A vulnerability in the WebVPN service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper management of authenticated sessions in the WebVPN portal. An attacker could exploit this vulnerability by authenticating with valid credentials and accessing a specific URL in the WebVPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a temporary DoS condition. |
| A vulnerability in how Cisco Firepower Threat Defense (FTD) Software handles session timeouts for management connections could allow an unauthenticated, remote attacker to cause a buildup of remote management connections to an affected device, which could result in a denial of service (DoS) condition. The vulnerability exists because the default session timeout period for specific to-the-box remote management connections is too long. An attacker could exploit this vulnerability by sending a large and sustained number of crafted remote management connections to an affected device, resulting in a buildup of those connections over time. A successful exploit could allow the attacker to cause the remote management interface or Cisco Firepower Device Manager (FDM) to stop responding and cause other management functions to go offline, resulting in a DoS condition. The user traffic that is flowing through the device would not be affected, and the DoS condition would be isolated to remote management only. |
| Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix the missing xa_store error check
xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot
be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed,
so check error for xa_store() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix return value of f2fs_convert_inline_inode()
If device is readonly, make f2fs_convert_inline_inode()
return EROFS instead of zero, otherwise it may trigger
panic during writeback of inline inode's dirty page as
below:
f2fs_write_single_data_page+0xbb6/0x1e90 fs/f2fs/data.c:2888
f2fs_write_cache_pages fs/f2fs/data.c:3187 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3342 [inline]
f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3369
do_writepages+0x359/0x870 mm/page-writeback.c:2634
filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397
__filemap_fdatawrite_range mm/filemap.c:430 [inline]
file_write_and_wait_range+0x1aa/0x290 mm/filemap.c:788
f2fs_do_sync_file+0x68a/0x1ae0 fs/f2fs/file.c:276
generic_write_sync include/linux/fs.h:2806 [inline]
f2fs_file_write_iter+0x7bd/0x24e0 fs/f2fs/file.c:4977
call_write_iter include/linux/fs.h:2114 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xa72/0xc90 fs/read_write.c:590
ksys_write+0x1a0/0x2c0 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Return non-zero value from tipc_udp_addr2str() on error
tipc_udp_addr2str() should return non-zero value if the UDP media
address is invalid. Otherwise, a buffer overflow access can occur in
tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP
media address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: handle backlogging of crypto requests
Since we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our
requests to the crypto API, crypto_aead_{encrypt,decrypt} can return
-EBUSY instead of -EINPROGRESS in valid situations. For example, when
the cryptd queue for AESNI is full (easy to trigger with an
artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued
to the backlog but still processed. In that case, the async callback
will also be called twice: first with err == -EINPROGRESS, which it
seems we can just ignore, then with err == 0.
Compared to Sabrina's original patch this version uses the new
tls_*crypt_async_wait() helpers and converts the EBUSY to
EINPROGRESS to avoid having to modify all the error handling
paths. The handling is identical. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Have trace_event_file have ref counters
The following can crash the kernel:
# cd /sys/kernel/tracing
# echo 'p:sched schedule' > kprobe_events
# exec 5>>events/kprobes/sched/enable
# > kprobe_events
# exec 5>&-
The above commands:
1. Change directory to the tracefs directory
2. Create a kprobe event (doesn't matter what one)
3. Open bash file descriptor 5 on the enable file of the kprobe event
4. Delete the kprobe event (removes the files too)
5. Close the bash file descriptor 5
The above causes a crash!
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:tracing_release_file_tr+0xc/0x50
What happens here is that the kprobe event creates a trace_event_file
"file" descriptor that represents the file in tracefs to the event. It
maintains state of the event (is it enabled for the given instance?).
Opening the "enable" file gets a reference to the event "file" descriptor
via the open file descriptor. When the kprobe event is deleted, the file is
also deleted from the tracefs system which also frees the event "file"
descriptor.
But as the tracefs file is still opened by user space, it will not be
totally removed until the final dput() is called on it. But this is not
true with the event "file" descriptor that is already freed. If the user
does a write to or simply closes the file descriptor it will reference the
event "file" descriptor that was just freed, causing a use-after-free bug.
To solve this, add a ref count to the event "file" descriptor as well as a
new flag called "FREED". The "file" will not be freed until the last
reference is released. But the FREE flag will be set when the event is
removed to prevent any more modifications to that event from happening,
even if there's still a reference to the event "file" descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Return correct error code from smb2_get_enc_key
Avoid a warning if the error percolates back up:
[440700.376476] CIFS VFS: \\otters.example.com crypt_message: Could not get encryption key
[440700.386947] ------------[ cut here ]------------
[440700.386948] err = 1
[440700.386977] WARNING: CPU: 11 PID: 2733 at /build/linux-hwe-5.4-p6lk6L/linux-hwe-5.4-5.4.0/lib/errseq.c:74 errseq_set+0x5c/0x70
...
[440700.397304] CPU: 11 PID: 2733 Comm: tar Tainted: G OE 5.4.0-70-generic #78~18.04.1-Ubuntu
...
[440700.397334] Call Trace:
[440700.397346] __filemap_set_wb_err+0x1a/0x70
[440700.397419] cifs_writepages+0x9c7/0xb30 [cifs]
[440700.397426] do_writepages+0x4b/0xe0
[440700.397444] __filemap_fdatawrite_range+0xcb/0x100
[440700.397455] filemap_write_and_wait+0x42/0xa0
[440700.397486] cifs_setattr+0x68b/0xf30 [cifs]
[440700.397493] notify_change+0x358/0x4a0
[440700.397500] utimes_common+0xe9/0x1c0
[440700.397510] do_utimes+0xc5/0x150
[440700.397520] __x64_sys_utimensat+0x88/0xd0 |
| Proxygen lacked a generalized slow-consumer detection mechanism in its core HTTP session layer. A remote, unauthenticated attacker could exploit HTTP/2 flow-control by setting SETTINGS_INITIAL_WINDOW_SIZE to 0 or withholding WINDOW_UPDATE frames, causing the server to buffer complete response bodies in memory indefinitely for stalled streams. By opening many simultaneous streams requesting large resources while preventing the server from transmitting responses, an attacker could induce unbounded memory growth leading to service degradation, resource exhaustion, or denial of service. Versions v2017.01.16.00 through v2026.07.20.00 are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: handle attr_set_size() errors when truncating files
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
block: skip sync_blockdev() on surprise removal in bdev_mark_dead()
bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no ->mark_dead op)
lost its !surprise guard when the holder ->mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.
syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -> blk_mark_disk_dead() ->
bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.
Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.
Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reset write verifier on deferred writeback errors
nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to
detect deferred writeback errors, but neither rotates the server's write
verifier (nn->writeverf) when this check fails. Every other
durable-storage-failure path in these functions calls
commit_reset_write_verifier() before returning an error.
The missing rotation means clients holding UNSTABLE write data under the
current verifier will COMMIT, receive the unchanged verifier back, and
conclude their data is durable — silently dropping data that failed
writeback. This violates the UNSTABLE+COMMIT durability contract
(RFC 1813 §3.3.7, RFC 8881 §18.32).
Add commit_reset_write_verifier() calls at both filemap_check_wb_err()
error sites, matching the pattern used by adjacent error paths in the
same functions. The helper already filters -EAGAIN and -ESTALE
internally, so the calls are unconditionally safe. |
| For untrusted certificates that contain the "Authority Information Access - caIssuers URI" extension, Szafir SDK will automatically download the parent CA certificate from the specified URL and will import it to its trust store as a "nonqualified" certificate. In such a case, Szafir SDK returns a success status code of 0 ("Positively verified") upon successful cryptographic verification and a certificate status of "nonqualified".
For other types of untrusted certificates, Szafir SDK returns a success status code of 0 ("Positively verified") upon successful cryptographic verification and a certificate status of "nondetermined".
This may lead integrating applications to incorrectly treat the digital signature as valid despite an untrusted certificate chain. This flaw enables authentication bypass and user impersonation:
(1) in use-cases other than qualified certificate authentication, or
(2) if the qualified certificate authentication use-case is not correctly implemented by the integrating application.
This issue was fixed in version 1.8.463.2. |
| JGraphT Core v1.5.2 was discovered to contain a NullPointerException via the component org.jgrapht.alg.util.ToleranceDoubleComparator::compare(Double, Double). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path. |
