| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| froxlor versions before 2.2.5 fail to validate newline characters in subdomain redirect URLs, allowing authenticated customers to inject arbitrary nginx or Apache configuration directives. Attackers can supply URLs containing literal newlines that are written verbatim into vhost config files during cron rebuild, enabling web server configuration corruption, denial of service, or hijacking of HTTP responses across hosted domains. |
| A security flaw has been discovered in D-Link DIR-823G 1.0.2B05_20181207. The impacted element is the function strcpy of the file /HNAP1/SetStaticRouteSettings of the component HNAP1. The manipulation of the argument PAddress/SubnetMask/Gateway results in stack-based buffer overflow. The attack can be launched remotely. |
| A flaw has been found in Totolink A3002MU Hh-B20211125.1046. The affected element is the function formPortFw of the file /boafrm/formPortFw of the component boa. This manipulation of the argument service_type causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used. |
| In NLnet Labs Unbound up to and including 1.26.0, a vulnerability was found in the DNSSEC validator that enables denial of service and possible remote code execution as a result of digesting DNSKEYs. A DNSKEY with an owner compression pointer to its own RDATA can overflow the digest buffer. Remote code execution is possible through attacker controlled data. An adversary can exploit the vulnerability by controlling a malicious zone and querying a vulnerable Unbound. |
| On affected EOS platforms with AAA-based gRPC authorization enabled for OpenConfig, gRPC requests of an authenticated user to OpenConfig may use the wrong privilege level, resulting in an authorization using the wrong AAA method list. This does not impact non-gRPC OpenConfig requests such as NETCONF. |
| An issue in MongoDB Server's intra-cluster connection setup could allow a party with suitable network access to influence which authentication mechanism is used when one replica set member connects to another. Under certain conditions, this could cause the cluster's shared internal credential to be transmitted in a less-protected form, potentially allowing that credential to be recovered. If recovered, the credential could be used to authenticate as the internal superuser to nodes in the deployment. |
| Seagull Software BarTender 2010, 2016, and 2019 contain an unauthenticated remote code execution vulnerability in the .NET Remoting service exposed on TCP port 7375 via BtSystem.Service.exe. The service registers an unauthenticated singleton endpoint — BarTenderSystem for BarTender 2016 <= R9, and DataServiceSingleton for BarTender 2019 <= R10 — configured with BinaryServerFormatterSinkProvider and TypeFilterLevel set to Full. An unauthenticated remote attacker can exploit .NET Remoting object unmarshalling to read or write arbitrary files on the server using the .NET WebClient class, or coerce NTLMv2 authentication by supplying a UNC path to an attacker-controlled server, enabling sensitive credential disclosure, remote code execution, or lateral movement depending on service account privileges and network environment. The service runs in the context of NT AUTHORITY\\SYSTEM. This vulnerability is corrected in BarTender 12.0.1. Users of affected releases should upgrade to BarTender 12.0.1 or later. |
| An unauthenticated P4Runtime (Programming Protocol-Independent Packet Processors Runtime) client can achieve arbitrary code execution under certain conditions on affected platforms running Arista EOS configured with P4Runtime. P4Runtime is disabled by default in Arista EOS. By crafting a malicious packet during the initiation of a P4Runtime session, an attacker can obtain complete administrative control over the compromised switch.
This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks. |
| The two built-in name-finder patterns exposed by
opennlp.tools.namefind.RegexNameFinderFactory - DEFAULT_REGEX_NAME_FINDER.EMAIL
and DEFAULT_REGEX_NAME_FINDER.URL - contain ambiguous nested quantifiers. An
application that obtains these finders through
RegexNameFinderFactory.getDefaultRegexNameFinders(...) and then applies them to
untrusted text through RegexNameFinder.find(String[]) or RegexNameFinder.find(String)
can be driven into super-linear backtracking or into unbounded matcher recursion by a
small crafted input.
For the EMAIL pattern, a long run of local-part characters that is never followed by an
@ forces the matcher to re-scan to end-of-input from every starting offset. Cost grows
quadratically with input length: an input of approximately 32 KB consumes several seconds
of CPU in a single find() call and returns no match, and each doubling of the input
multiplies the cost roughly four-fold.
For the URL pattern, the query-string sub-expression nests a capturing repetition inside
an outer repetition. The JDK matcher recurses once per query token, so an input of
approximately 4 KB containing many &-separated tokens exhausts the thread stack and
causes java.lang.StackOverflowError to propagate out of find(), terminating the
calling thread. On a thread created with a smaller stack (for example -Xss512k, typical
of server worker pools) approximately 1 KB is sufficient.
In both cases an attacker who can supply text for analysis can convert a single request
into seconds to minutes of pinned CPU, or into an abrupt thread death, denying service to
the embedding application. No authentication, special configuration, or model file is
required beyond the application having selected one of the two built-in finders.
This issue affects Apache OpenNLP: from 2.0.0 through 2.5.11; from 3.0.0-M1 through
3.0.0-M5.
Users are recommended to upgrade to version 2.5.12, or to 3.0.0-M6 for users tracking the
3.0.0 milestone line, which fix the issue. |
| LangBot before 4.10.11 generates password recovery keys with only 24 bits of entropy and applies no rate limiting to the unauthenticated reset-password endpoint. Remote attackers knowing the administrator email can exhaust the keyspace through concurrent requests to reset the admin password and gain account access. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the edgserver management service of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote unauthenticated attacker to execute arbitrary OS commands as root via crafted requests to TCP port 5058. |
| Deserialization of untrusted data in WHMCS 9.0.0 before 9.0.8 and 8.0.0 before 8.13.7 allows remote attackers to execute arbitrary code. |
| Yonyou U8 Cloud contains an unauthenticated Java deserialization vulnerability in the nc.impl.pub.filesystem.FileManageServlet component that allows remote unauthenticated attackers to execute arbitrary OS commands by sending a serialized payload via POST request. Attackers can exploit the doAction method, which passes raw HTTP request body data directly to ObjectInputStream.readObject() without filtering, to achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-02-13. |
| On macOS, the virtio-fs host server used by Docker Sandboxes improperly follows symlinks when reopening an unlinked file from a stored path. A malicious guest can replace a parent directory with a symlink, escape the shared workspace, and read or modify arbitrary host files as the VMM user, potentially achieving host code execution. |
| Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember HTTP/1.1 does not reject messages containing both Transfer-Encoding and Content-Length, so an intermediary and Ember can select different body framing rules. When ember-server is behind a keep-alive intermediary that forwards both headers and frames by Content-Length, an unauthenticated attacker can smuggle a second request, bypass intermediary access controls, poison caches, or cause a victim request to be joined to an attacker-controlled prefix. The shared response parser can also desynchronize an ember-client connection when a malicious or compromised upstream sends both headers. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that regenerates credentials will expose that component's administrative interface to anyone aware of the default value. |
| motionEye (mEye) is an online interface for a piece of software called "motion," which is a video surveillance program with motion detection. Prior to 0.44.0, motionEye accepts the client-controlled meye_username and meye_password_hash cookies as authentication material without server-side session validation. An unauthenticated attacker who knows a target username and corresponding hash can set the cookies manually or cause them to be loaded by submitting blank credentials through the switch-user authentication flow, after which the server authenticates the attacker as that user. The administrator username and password-hash value are stored in /etc/motioneye/motion.conf, which is globally readable by default, allowing a local shell user to obtain reusable administrator credential material. Successful impersonation can enable account lockout, password changes and persistence, data enumeration, data destruction, and data exfiltration. This issue is fixed in version 0.44.0. |
| On affected platforms running Arista EOS with authenticated Bidirectional Forwarding Detection (BFD) sessions configured, a specially crafted packet can cause the BFD session(s) to go down. This may result in undesirable network changes because various routing protocols monitor status on BFD session(s). |
| Tencent Mass Service Engine in Cluster (MSEC) allows a remote, unauthenticated attacker to send a crafted POST request including ../ and gain root access on the target device. An attacker who uploads a webshell can execute arbitrary code as root. |
| Bambuddy is a self-hosted print archive and management system for Bambu Lab 3D printers. Starting in version 0.1.6 and prior to version 0.2.4.4, a fail-open in the authentication code allows any attacker to bypass authentication by flooding a public endpoint to exhaust resources causing database access to fail, granting unauthenticated access to all protected endpoints. Version 0.2.4.4 patches the issue. |
