Export limit exceeded: 384355 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384355 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-51679 | 1 Openrisc | 1 Or1200 | 2026-08-28 | 9.1 Critical |
| An issue was discovered in openRISC OR1200 commit 83ac6b. A mismatch between the RTL and netlist can lead to unexpected behavior. | ||||
| CVE-2026-80525 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup The ipc_config_data buffer for copier widgets is built once during ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached for reuse. For host copiers this buffer contains the copier_data with gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link DMA. On suspend/resume, both host and link DMA streams are released and re-allocated with potentially different stream tags. The underlying copier_data and dma_config_tlv structures are correctly updated by host_config and sdw_hda_dai_hw_params respectively. However, since the widget list (spcm->stream[].list) persists across suspend, sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare never runs again to rebuild ipc_config_data. The stale cached payload is then sent to firmware with boot-time DMA channel assignments, causing DMA channel conflicts that lead to firmware errors and crashes. Fix this by refreshing copier_data and dma_config_tlv portions of ipc_config_data in sof_ipc4_widget_setup right before the IPC message is sent. This ensures the payload always reflects the current DMA state regardless of whether ipc_prepare ran. For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily inflated to include the TLV size (matching the ipc_config_data layout) before copying, then restored, mirroring what sof_ipc4_prepare_copier_module does when first building the buffer. | ||||
| CVE-2026-59642 | 2 Bouncycastle, Legion Of The Bouncy Castle Inc. | 6 Bc-java, Bcpkix-fips, Bouncy Castle For Java Lts and 3 more | 2026-08-28 | 7.5 High |
| In Bouncy Castle for Java before 1.85, CMS AuthenticatedData content not bound to MAC when authAttrs present. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bcpkix-fips 1.0.12 (1.0.X series), 2.0.12 (2.0.X series) and 2.1.12 (2.1.X series). | ||||
| CVE-2026-59641 | 2 Bouncycastle, Legion Of The Bouncy Castle Inc. | 7 Bc-java, Bcjmail-fips, Bcmail-fips and 4 more | 2026-08-28 | 5.3 Medium |
| In Bouncy Castle for Java before 1.85, S/MIME validator trusts signer-asserted signingTime for path validation. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bcmail-fips and bcjmail-fips 1.0.7 (1.0.X series), 2.0.7 (2.0.X series) and 2.1.7 (2.1.X series). | ||||
| CVE-2026-16781 | 1 Autodesk | 1 3ds Max | 2026-08-28 | 5.5 Medium |
| A maliciously crafted SVG file, when parsed through Autodesk 3ds Max, can trigger an Uncontrolled Recursion vulnerability. A malicious actor may leverage this vulnerability to cause the application to terminate unexpectedly, resulting in a denial-of-service. | ||||
| CVE-2025-61478 | 2026-08-28 | 7.5 High | ||
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via Spoofed SYN packets. | ||||
| CVE-2025-61480 | 2026-08-28 | 7.5 High | ||
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via spoofed TCP FIN packets without validating the sequence or acknowledgment numbers. | ||||
| CVE-2026-75328 | 2026-08-28 | 7.5 High | ||
| In DocSys-master V2.02.85, the downloadDocEx interface in src/com/DocSystem/controller/DocController.java has an arbitrary file read vulnerability: | ||||
| CVE-2026-74735 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: fix tunnel and session refcount leak on seq_file release In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state (pd->tunnel and pd->session) is kept in seq_file private data to allow iteration across multiple read() system calls. However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels before reading to end-of-file (EOF), any tunnel or session reference stored in pd->tunnel / pd->session is left un-dropped when seq_file private data is freed. Fix this by dropping any remaining pd->tunnel and pd->session references in pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. | ||||
| CVE-2026-80519 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: finish crypto callback cleanup before peer release Crypto completion callbacks hold both key-slot and peer references. The peer reference pins the netdev, and dropping the last peer reference can let netdev unregistration and module removal make progress. Do not release that peer reference before the callback has finished its own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can schedule an RCU callback backed by module text after ovpn_cleanup rcu_barrier has already run. The TX error path also freed the remaining skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev lifetime window. Release the key slot and free any remaining skb first, then drop the peer reference as the last callback action. | ||||
| CVE-2026-80521 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unlink scc_entry in unix_del_edge(). Kyle Zeng reported that GC could free a dead SCC partially. The scenario is as follows: 1) Create two SCCs: X -. A <-> B ^--' 2) Run the following concurrently: 2-1) send() sk-B to sk-B from sk-X 2-2) close() both A and B At 2-1), there is a small window where unix_add_edges() publishes a new edge (B <-> B) to GC but its skb is not queued by skb_queue_tail(). If 2-2) completes before skb_queue_tail() and GC is triggered, it judges A <-> B as dead, but B is not freed because GC cannot collect the not-yet-queued skb holding the B <-> B edge. X -. A <-> B -. This edge is visible ^--' ^..' but skb is not This itself is not a problem since the next GC run will judge B as dead as well and free it finally. X -. A <.> B -. ^--' ^--' However, X's SCC forces the next GC to call unix_walk_scc_fast(), and it iterates over A through B's scc_entry. Let's unlink scc_entry before freeing the vertex in unix_del_edge(). | ||||
| CVE-2026-80522 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req() Perform rctx->cryptlen calculation in tegra_gcm_do_one_req() the same way it is done in tegra_ccm_crypt_init(). The current formulae may lead to a crash if a caller does not call tegra_gcm_setauthsize() and so ctx->authsize remains zero. Then a decrypt operation with incorrect rctx->cryptlen will lead to a write beyound rctx->dst_sg buffer. As a follow-up cleanup delete struct tegra_aead_ctx->authsize field since it appears to be completely unused. Also simplify tegra_ccm_setauthsize() and tegra_gcm_setauthsize() functions respectively. | ||||
| CVE-2026-80578 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: core: Fix pointer desynchronization in fb_io_read() In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to a faulty user buffer), the loop adjusts the chunk size 'c' and updates the remaining 'count'. However, the hardware 'src' pointer has already been eagerly advanced by the original chunk size. If the loop is allowed to continue, the read will resume from an incorrect, over-advanced offset. Since the remaining 'count' was only decremented by the successful bytes, this desynchronization causes the next iterations to execute more hardware reads than originally bounded, eventually leading to out-of-bounds I/O reads. Fix this by breaking out of the loop immediately upon a partial copy_to_user(). A partial copy indicates a faulty user buffer, making subsequent read attempts futile. Breaking out ensures we return the number of successfully read bytes without risking out-of-bounds hardware accesses in subsequent mismatched iterations. | ||||
| CVE-2026-80589 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. | ||||
| CVE-2026-38343 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-28 | 5.5 Medium |
| An integer overflow in the libavfilter/vf_scale.c component of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted video file. | ||||
| CVE-2026-37237 | 1 Vllm-project | 1 Vllm | 2026-08-28 | N/A |
| vLLM up to and including 0.17.0 allows remote attackers to cause a Denial of Service via memory exhaustion. The AsyncMediaIO.fetch_audio and AsyncMediaIO.fetch_image functions in multimodal/inputs.py fetch user-supplied media URLs using aiohttp and call r.read() without enforcing a maximum response size, allowing an attacker to exhaust server memory by providing a URL to an arbitrarily large file. | ||||
| CVE-2026-38636 | 1 Redox-os | 1 Relibc | 2026-08-28 | N/A |
| An issue in the seekdir() function (/dirent/mod.rs) of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via a crafted input. | ||||
| CVE-2026-80603 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read parse_dcc() treats data_end as an inclusive end pointer, but its only caller passes data_limit = ib_ptr + datalen, which points one past the last valid byte. The newline search loop iterates while tmp <= data_end, so when no newline is present, *tmp is read at tmp == data_end, one byte beyond the region filled by skb_header_pointer(). irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte is uninitialized or stale; if it contains an ASCII digit, simple_strtoul will consume it and produce a wrong DCC IP or port in the conntrack expectation. The extra allocation byte is also a fragile guard: if the cap or allocation size changes, this becomes a real out-of-bounds read. Change the loop and its post-loop check to use strict less-than, consistent with the caller's exclusive-end convention. Update the function comment accordingly. | ||||
| CVE-2026-80644 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel. | ||||
| CVE-2026-82242 | 1 Budibase | 2 Budibase, Server | 2026-08-28 | 7.7 High |
| Budibase versions before 3.41.3 contain a missing authorization vulnerability in the POST /api/resources/duplicate endpoint that allows authenticated builders to inject tables, automations, queries, and screens into any other application without holding any role in the destination workspace. Attackers can inject resources by specifying an arbitrary destination workspace ID in the request body, then trigger injected automations with outgoing webhooks to exfiltrate data from victim applications. | ||||