| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: bail out of setup if the controller is inaccessible
xhci_gen_setup() locates the operational registers using the capability
length read from the very first register:
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
If the controller is dead or has dropped off the bus, that read returns
~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes
past the page-aligned MMIO base, i.e. unaligned. The first access
through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is
then an unaligned readl() on device memory. arm64 faults on unaligned
device accesses, so instead of xhci_handshake() catching the all-ones
value and returning -ENODEV, setup oopses:
xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci-pci-renesas 0005:08:00.0: xHCI Host Controller
xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1
Unable to handle kernel paging request at virtual address ffff80030a770103
ESR = 0x0000000096000021
FSC = 0x21: alignment fault
Internal error: Oops: 0000000096000021 [#1] SMP
pc : xhci_halt [xhci_hcd]
Call trace:
xhci_halt
xhci_gen_setup
xhci_pci_setup
usb_add_hcd
usb_hcd_pci_probe
xhci_pci_common_probe
xhci_pci_renesas_probe
This was hit with a Renesas uPD720201 that failed to power up ("Unable
to change power state from D3cold to D0, device inaccessible") yet still
reached the HCD probe path.
Read the capability register once, and if it reads back the all-ones
value (as xhci_handshake() and xhci_reset() already test for), abort
setup with -ENODEV before op_regs is derived from it. Reading it once
also avoids re-reading a register that may change under a concurrent
hot-removal. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| A flaw was found in Data Science Pipelines. A restricted user, or tenant, can exploit an improper authorization vulnerability in the setDefaultServiceAccount function. By specifying a more privileged ServiceAccount (SA) during a CreateRun request, an attacker can bypass authorization checks. This allows the tenant to run their containers with elevated privileges, potentially leading to the disclosure of sensitive information (secrets) and the ability to execute commands within other users' pods. |
| Kyoo is a self-hosted media server focused on movies, series, and anime. Prior to 5.1.0, a registered user with the core.play permission could supply a base64-encoded filesystem path to the transcoder. The path handling in transcoder/src/api/path.go cleaned the value and checked only that it began with Settings.SafePath before getHash processed it, while transcoder/src/api/streams.go served the accepted path without verifying a Kyoo catalog record. This missing catalog-level authorization allowed the user to retrieve hidden, temporary, operational, or other uncataloged files beneath the media directory when the path was known or guessed. This vulnerability is fixed in 5.1.0. |
| Perses is an open-source dashboard and visualization project for observability data. Prior to 0.54.0-beta.3, an authenticated user with viewer access to one project can supply another project through the project query parameter on project-scoped list endpoints, including /api/v1/projects/{project}/dashboards and /api/v1/datasources. The request-controlled project value is used to select dashboards, datasources, and variables without enforcing the caller's authorization for that selected project, which breaks project-level tenant isolation and exposes complete resource specifications belonging to other projects. This issue is fixed in version 0.54.0-beta.3. |
| The WP Ghost (Hide My WP Ghost) – Security & Firewall plugin for WordPress is vulnerable to Open Redirect in all versions up to, and including, 7.0.02. This is due to the plugin not properly validating user input. This makes it possible for unauthenticated attackers to redirect users to potentially malicious sites if they can successfully trick them into clicking on a specially crafted link. Exploitation requires tricking a logged-in user into clicking a crafted logout URL; the victim is fully logged out via wp_logout() before the malicious redirect is issued, making the logout irreversible as part of the attack chain. |
| A buffer overflow in the SBC_DecodeFrames() function of Bestechnic Co., Ltd BES2300 Bluetooth Audio SoC firmware v3.x and earlier and fixed in v.5.0 allows attackers to cause a Denial of Service (DoS) via sending a crafted frame. |
| A logic issue was addressed with improved checks. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Sequoia 15.8, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. An app may be able to leak sensitive user information. |
| A stack overflow vulnerability exists in the libexpat library due to the way it handles recursive entity expansion in XML documents. When parsing an XML document with deeply nested entity references, libexpat can be forced to recurse indefinitely, exhausting the stack space and causing a crash. This issue could lead to denial of service (DoS) or, in some cases, exploitable memory corruption, depending on the environment and library usage. |
| A logic issue was addressed with improved validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27. An app may be able to access sensitive user data. |
| An information disclosure issue was addressed with improved state management. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 26.6.1. A website may be able to determine a user's IP address with Private Relay turned on. |
| A logic issue was addressed with improved state management. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. A malicious application may bypass Gatekeeper checks. |
| An integer overflow was addressed with improved input validation. This issue is fixed in Safari 26.6.1, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. Processing maliciously crafted web content may lead to memory corruption. |
| An information disclosure issue was addressed with improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 26.6.1. A website may be able to determine a user's IP address with Private Relay turned on. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27. An app may be able to break out of its sandbox. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to bypass Gatekeeper checks. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An attacker in a privileged network position may be able to leak sensitive user information. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.6, macOS Tahoe 26.7. An app may bypass Gatekeeper checks. |
