Export limit exceeded: 21085 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20087 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40348 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts If two competing threads enter alloc_slab_obj_exts() and one of them fails to allocate the object extension vector, it might override the valid slab->obj_exts allocated by the other thread with OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and expects a valid pointer to dereference a NULL pointer later on. Update slab->obj_exts atomically using cmpxchg() to avoid slab->obj_exts overrides by racing threads. Thanks for Vlastimil and Suren's help with debugging. | ||||
| CVE-2025-40346 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arch_topology: Fix incorrect error check in topology_parse_cpu_capacity() Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity() which causes the code to proceed with NULL clock pointers. The current logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both valid pointers and NULL, leading to potential NULL pointer dereference in clk_get_rate(). Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns: "The error code within @ptr if it is an error pointer; 0 otherwise." This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed) when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be called when of_clk_get() returns NULL. Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid pointers, preventing potential NULL pointer dereference in clk_get_rate(). | ||||
| CVE-2025-40344 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two operations shall be synchronized to avoid slab-use-after-free or worse errors. | ||||
| CVE-2025-40342 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: use lock accessing port_state and rport state nvme_fc_unregister_remote removes the remote port on a lport object at any point in time when there is no active association. This races with with the reconnect logic, because nvme_fc_create_association is not taking a lock to check the port_state and atomically increase the active count on the rport. | ||||
| CVE-2025-40340 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix oops in xe_gem_fault when running core_hotunplug test. I saw an oops in xe_gem_fault when running the xe-fast-feedback testlist against the realtime kernel without debug options enabled. The panic happens after core_hotunplug unbind-rebind finishes. Presumably what happens is that a process mmaps, unlocks because of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left, causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since there was nothing left to populate, and then oopses in "mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource is NULL. It's convoluted, but fits the data and explains the oops after the test exits. | ||||
| CVE-2025-40339 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix nullptr err of vm_handle_moved If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL. So, such kind of amdgpu_bo_va should be updated separately before amdgpu_vm_handle_moved. | ||||
| CVE-2025-40338 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Do not share the name pointer between components By sharing 'name' directly, tearing down components may lead to use-after-free errors. Duplicate the name to avoid that. At the same time, update the order of operations - since commit cee28113db17 ("ASoC: dmaengine_pcm: Allow passing component name via config") the framework does not override component->name if set before invoking the initializer. | ||||
| CVE-2025-40334 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq buffer virtual address and size It needs to validate the userq object virtual address to determine whether it is residented in a valid vm mapping. | ||||
| CVE-2025-68327 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Fix synchronous external abort on unbind A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is executed after the configuration sequence described above: modprobe usb_f_ecm modprobe libcomposite modprobe configfs cd /sys/kernel/config/usb_gadget mkdir -p g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir -p strings/0x409 echo "0123456789" > strings/0x409/serialnumber echo "Renesas." > strings/0x409/manufacturer echo "Ethernet Gadget" > strings/0x409/product mkdir -p functions/ecm.usb0 mkdir -p configs/c.1 mkdir -p configs/c.1/strings/0x409 echo "ECM" > configs/c.1/strings/0x409/configuration if [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1 fi echo 11e20000.usb > UDC echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind The displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80 Call trace: usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P) usbhsg_pullup+0x4c/0x7c [renesas_usbhs] usb_gadget_disconnect_locked+0x48/0xd4 gadget_unbind_driver+0x44/0x114 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_release_driver+0x18/0x24 bus_remove_device+0xcc/0x10c device_del+0x14c/0x404 usb_del_gadget+0x88/0xc0 usb_del_gadget_udc+0x18/0x30 usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs] usbhs_mod_remove+0x20/0x30 [renesas_usbhs] usbhs_remove+0x98/0xdc [renesas_usbhs] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xb8 drv_attr_store+0x24/0x38 sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x2ac/0x350 ksys_write+0x68/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021) ---[ end trace 0000000000000000 ]--- note: sh[188] exited with irqs disabled note: sh[188] exited with preempt_count 1 The issue occurs because usbhs_sys_function_pullup(), which accesses the IP registers, is executed after the USBHS clocks have been disabled. The problem is reproducible on the Renesas RZ/G3S SoC starting with the addition of module stop in the clock enable/disable APIs. With module stop functionality enabled, a bus error is expected if a master accesses a module whose clock has been stopped and module stop activated. Disable the IP clocks at the end of remove. | ||||
| CVE-2025-40333 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix infinite loop in __insert_extent_tree() When we get wrong extent info data, and look up extent_node in rb tree, it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by return NULL and print some kernel messages in that case. | ||||
| CVE-2025-40332 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mmap write lock not release If mmap write lock is taken while draining retry fault, mmap write lock is not released because svm_range_restore_pages calls mmap_read_unlock then returns. This causes deadlock and system hangs later because mmap read or write lock cannot be taken. Downgrade mmap write lock to read lock if draining retry fault fix this bug. | ||||
| CVE-2025-40329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb The Mesa issue referenced below pointed out a possible deadlock: [ 1231.611031] Possible interrupt unsafe locking scenario: [ 1231.611033] CPU0 CPU1 [ 1231.611034] ---- ---- [ 1231.611035] lock(&xa->xa_lock#17); [ 1231.611038] local_irq_disable(); [ 1231.611039] lock(&fence->lock); [ 1231.611041] lock(&xa->xa_lock#17); [ 1231.611044] <Interrupt> [ 1231.611045] lock(&fence->lock); [ 1231.611047] *** DEADLOCK *** In this example, CPU0 would be any function accessing job->dependencies through the xa_* functions that don't disable interrupts (eg: drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()). CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling callback so in an interrupt context. It will deadlock when trying to grab the xa_lock which is already held by CPU0. Replacing all xa_* usage by their xa_*_irq counterparts would fix this issue, but Christian pointed out another issue: dma_fence_signal takes fence.lock and so does dma_fence_add_callback. dma_fence_signal() // locks f1.lock -> drm_sched_entity_kill_jobs_cb() -> foreach dependencies -> dma_fence_add_callback() // locks f2.lock This will deadlock if f1 and f2 share the same spinlock. To fix both issues, the code iterating on dependencies and re-arming them is moved out to drm_sched_entity_kill_jobs_work(). [phasta: commit message nits] | ||||
| CVE-2025-40328 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_close_cached_fid() find_or_create_cached_dir() could grab a new reference after kref_put() had seen the refcount drop to zero but before cfid_list_lock is acquired in smb2_close_cached_fid(), leading to use-after-free. Switch to kref_put_lock() so cfid_release() is called with cfid_list_lock held, closing that gap. | ||||
| CVE-2025-68320 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lan966x: Fix sleeping in atomic context The following warning was seen when we try to connect using ssh to the device. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbear preempt_count: 1, expected: 0 INFO: lockdep is turned off. CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONE Tainted: [W]=WARN Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __might_resched+0x16c/0x2b0 __might_resched from __mutex_lock+0x64/0xd34 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from lan966x_stats_get+0x5c/0x558 lan966x_stats_get from dev_get_stats+0x40/0x43c dev_get_stats from dev_seq_printf_stats+0x3c/0x184 dev_seq_printf_stats from dev_seq_show+0x10/0x30 dev_seq_show from seq_read_iter+0x350/0x4ec seq_read_iter from seq_read+0xfc/0x194 seq_read from proc_reg_read+0xac/0x100 proc_reg_read from vfs_read+0xb0/0x2b0 vfs_read from ksys_read+0x6c/0xec ksys_read from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b11fa8 to 0xf0b11ff0) 1fa0: 00000001 00001000 00000008 be9048d8 00001000 00000001 1fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 00000001 1fe0: 0005404c be9048c0 00018684 b6ec2cd8 It seems that we are using a mutex in a atomic context which is wrong. Change the mutex with a spinlock. | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2025-40317 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regmap: slimbus: fix bus_context pointer in regmap init calls Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap. That commit breaks audio playback, for instance, on sdm845 Thundercomm Dragonboard 845c board: Unable to handle kernel paging request at virtual address ffff8000847cbad4 ... CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT Hardware name: Thundercomm Dragonboard 845c (DT) ... Call trace: slim_xfer_msg+0x24/0x1ac [slimbus] (P) slim_read+0x48/0x74 [slimbus] regmap_slimbus_read+0x18/0x24 [regmap_slimbus] _regmap_raw_read+0xe8/0x174 _regmap_bus_read+0x44/0x80 _regmap_read+0x60/0xd8 _regmap_update_bits+0xf4/0x140 _regmap_select_page+0xa8/0x124 _regmap_raw_write_impl+0x3b8/0x65c _regmap_bus_raw_write+0x60/0x80 _regmap_write+0x58/0xc0 regmap_write+0x4c/0x80 wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x] snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core] __soc_pcm_hw_params+0x22c/0x634 [snd_soc_core] dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core] dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core] snd_pcm_hw_params+0x124/0x464 [snd_pcm] snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm] snd_pcm_ioctl+0x34/0x4c [snd_pcm] __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xec el0t_64_sync_handler+0xa0/0xf0 el0t_64_sync+0x198/0x19c The __devm_regmap_init_slimbus() started to be used instead of __regmap_init_slimbus() after the commit mentioned above and turns out the incorrect bus_context pointer (3rd argument) was used in __devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or the first user of devm_regmap_init_slimbus() but we should fix it till the point where __devm_regmap_init_slimbus() was introduced therefore two "Fixes" tags. While at this, also correct the same argument in __regmap_init_slimbus(). | ||||
| CVE-2025-40316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix device use-after-free on unbind A recent change fixed device reference leaks when looking up drm platform device driver data during bind() but failed to remove a partial fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix kobject put for component sub-drivers"). This results in a reference imbalance on component bind() failures and on unbind() which could lead to a user-after-free. Make sure to only drop the references after retrieving the driver data by effectively reverting the previous partial fix. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. | ||||
| CVE-2025-40315 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues | ||||
| CVE-2025-40311 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/habanalabs: support mapping cb with vmalloc-backed coherent memory When IOMMU is enabled, dma_alloc_coherent() with GFP_USER may return addresses from the vmalloc range. If such an address is mapped without VM_MIXEDMAP, vm_insert_page() will trigger a BUG_ON due to the VM_PFNMAP restriction. Fix this by checking for vmalloc addresses and setting VM_MIXEDMAP in the VMA before mapping. This ensures safe mapping and avoids kernel crashes. The memory is still driver-allocated and cannot be accessed directly by userspace. | ||||
| CVE-2025-40309 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_conn_free BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline] BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline] BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352 CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted 6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci13 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x191/0x550 mm/kasan/report.c:482 kasan_report+0xc4/0x100 mm/kasan/report.c:595 sco_conn_free net/bluetooth/sco.c:87 [inline] kref_put include/linux/kref.h:65 [inline] sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441 hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline] hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313 hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121 hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147 hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319 worker_thread+0xbee/0x1200 kernel/workqueue.c:3400 kthread+0x3c7/0x870 kernel/kthread.c:463 ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 31370: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4382 [inline] __kmalloc_noprof+0x22f/0x390 mm/slub.c:4394 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xae/0x220 net/core/sock.c:2239 sk_alloc+0x34/0x5a0 net/core/sock.c:2295 bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151 sco_sock_alloc net/bluetooth/sco.c:562 [inline] sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593 bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135 __sock_create+0x3ad/0x780 net/socket.c:1589 sock_create net/socket.c:1647 [inline] __sys_socket_create net/socket.c:1684 [inline] __sys_socket+0xd5/0x330 net/socket.c:1731 __do_sys_socket net/socket.c:1745 [inline] __se_sys_socket net/socket.c:1743 [inline] __x64_sys_socket+0x7a/0x90 net/socket.c:1743 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 31374: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2428 [inline] slab_free mm/slub.c:4701 [inline] kfree+0x199/0x3b0 mm/slub.c:4900 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x4aa/0x630 net/core/sock.c:2373 sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333 __sock_release net/socket.c:649 [inline] sock_close+0xb8/0x230 net/socket.c:1439 __fput+0x3d1/0x9e0 fs/file_table.c:468 task_work_run+0x206/0x2a0 kernel/task_work.c:227 get_signal+0x1201/0x1410 kernel/signal.c:2807 arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] s ---truncated--- | ||||