| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zohocorp ManageEngine ADSelfService Plus versions before build 7001 are vulnerable to a remote code execution vulnerability in the GINA client. |
| A flaw was found in the ZBar barcode reader library. A heap-buffer-overflow write of one byte occurs when processing Structured-Append QR codes where the buffer size calculation does not account for NUL separator bytes inserted between decoded segments. An attacker could exploit this by crafting a QR code image that, when scanned by an application using zbar, causes heap corruption leading to a denial of service (application crash). |
| getID3 before 1.9.26 contains an OS command injection vulnerability in shell-out handlers that fail to escape filenames in command strings. Attackers can craft malicious filenames containing shell metacharacters to inject arbitrary commands executed with the privileges of the process embedding getID3. |
| An out-of-bounds write flaw was found in usbredir. Starting an isochronous OUT stream with a transfer count of 1 leaves the stream's single transfer buffer permanently unsubmitted, defeating the bounds check in usbredirhost_iso_packet() and allowing a usbredir peer to write past the end of the packet descriptor array on every subsequent isochronous packet. |
| ntopng is a web-based network traffic monitoring application. Prior to 6.7.260717, the vulnerability-scan endpoints scripts/lua/rest/v2/add/host/to_scan.lua and scripts/lua/rest/v2/exec/host/schedule_vulnerability_scan.lua accept the scan_ports parameter without an administrator gate and pass it through validateSingleWord, which permits shell metacharacters. scripts/lua/modules/vulnerability_scan/vs_utils.lua then concatenates scan_ports into an nmap command in nmap_scan_host and executes the command through ntop.execCmd or ntop.execCmdAsync and popen. Any authenticated non-admin user can execute operating-system commands as the ntopng process account when nmap is available. Because the endpoints accept GET requests while ntopng's CSRF validation applies to POST request bodies, an attacker can also trigger the command through a logged-in user's browser without possessing ntopng credentials. This issue is fixed in version 6.7.260717. |
| PLANET IGS-5225-8P2T4S industrial managed switch V1 and V2 firmware versions before 1.2412b260707 and 2.2412b260519 contain an OS command injection vulnerability in the web server. User-supplied input is passed to system() without sufficient filtering, allowing a remote authenticated attacker to execute arbitrary commands on the underlying operating system and escalate privileges to root. |
| PJSIP is a free and open source multimedia communication library written in C. In 2.17 and earlier, the PJSIP AVI parser in pjmedia/src/pjmedia/avi_player.c uses an input-file video chunk length as the number of bytes copied into a frame buffer whose capacity is derived from the declared media dimensions. A crafted AVI file can therefore cause an attacker-controlled out-of-bounds write past the heap allocation when an application plays the file or pulls its frames. The existing size assertion does not protect production release builds, where assertions are disabled. Typical local playback can crash the process, while applications that accept untrusted AVI sources expose a stronger memory-corruption condition. No fixed version is available as of this review. |
| btrbk is a tool for creating snapshots and remote backups of Btrfs subvolumes. From 0.29.0 until 0.32.7, btrbk's ssh_filter_btrbk.sh constructs allow_stream_match with a start anchor but without an end-of-string anchor for the complete command. A user restricted through an authorized_keys forced command can append a trailing pipe command after a valid btrbk command prefix, bypassing the allowlist and executing arbitrary commands with the privileges of the backup-target SSH account. Deployments that do not use ssh_filter_btrbk.sh in authorized_keys are not affected. This issue is fixed in version 0.32.7. |
| luci-app-advanced-reboot is a LuCI (web interface) application for OpenWrt that provides a way to reboot your router into an alternative firmware partition or perform reboot operations directly from the web UI. Prior to 1.1.2-6, the luci-app-advanced-reboot read ACL in applications/luci-app-advanced-reboot/root/usr/share/rpcd/acl.d/luci-app-advanced-reboot.json grants rpcd file.exec permission for the general shell interpreter /bin/sh. An authenticated delegated session with that read ACL can supply caller-controlled params; rpcd authorizes the executable path and passes those arguments to the shell, allowing arbitrary commands to execute as root. Builds without the /bin/sh exec grant, including the checked openwrt-24.10 and openwrt-23.05 branches, are not affected by this specific chain. This vulnerability is fixed in 1.1.2-6. |
| SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. Prior to 1.0.0, sail_codec_load_frame_v8_xbm() in src/sail-codecs/xbm/xbm.c allocates the decoded pixel buffer using the X11 one-byte-per-literal layout, but an X10 static short file causes the flat decode loop to write two file-controlled bytes per literal. When ceil(width/8) produces an odd row stride, the X10 literal count includes a padding byte for every row, but the destination has no space for those bytes, so loading the XBM through sail_load_from_file, sail_load_from_memory, or sail_start_loading_* produces a forward heap overwrite that scales with image height. The X11 static char path is not affected. The overwrite can corrupt process state, cause reliable crashes, and potentially enable code execution in a susceptible consuming application. This issue is fixed in version 1.0.0. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, privileged package fetch and cache-cleaning operations used race-prone path handling across libmport/fetch.c, libmport/clean.c, libmport/util.c, libmport/bundle_read_install_pkg.c, libmport/delete_primative.c, and libexec/mport.create/mport.create.c. A local attacker with write access to a participating package cache or staging path could race path checks and replacement operations to redirect package downloads, cleanup, or install-related side effects outside the intended cache. The affected lifecycle helper paths also used shell-form invocation, increasing command-line interpretation risk during privileged helper execution. This issue is fixed in version 2.7.8. |
| An OS Command Injection vulnerability affecting Tuleap Enterprise Edition from 17.3 through 17.5 could allow an attacker to execute arbitrary commands on the server. |
| A flaw was found in Cockpit. An integer overflow vulnerability in the `do_lastlog()` function, specifically in the offset calculation for `lastlog` entries on ILP32 (Integer, Long, Pointer 32-bit) builds, can be exploited. A low-privileged authenticated user with a specially provisioned large User ID (UID) can cause the computed offset to wrap around. This allows the user to perform unauthorized reads and writes to other users' `lastlog` records, potentially disclosing or altering sensitive login accounting information. |
| The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded.
tgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller.
The result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel data structures this way can escalate the calling thread to supervisor privilege or crash the system; the device-object permission required is a narrow capability that is not intended to confer any kernel-memory access. The fix adds the two missing K_SYSCALL_MEMORY_WRITE() validations before the driver call.
Exposure is narrow in practice. Only builds with CONFIG_USERSPACE=y and CONFIG_TIMEAWARE_GPIO=y compile the affected file, and from v3.6.0 onward the file additionally referenced a relocated header (<zephyr/syscall_handler.h>) and removed Z_SYSCALL_* macros, so such a configuration failed to build until those were repaired after v4.4.0. Downstream trees that locally corrected that breakage, and v3.5.0 builds where it did not exist, are the exposed population. |
| A vulnerability was found in D-Link R95 BE9500_1.00.16. This vulnerability affects the function system of the file /bin/ssi of the component DHMAPI. The manipulation of the argument NTPServer results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. |
| IBM Guardium Data Protection 12.2 is vulnerable to a command injection vulnerability in the create csr wildcard CLI command. An authenticated privileged CLI user can inject arbitrary shell commands through the alias input, resulting in command execution with root privileges. |
| In osmo-ggsn 1.14.0 an out of bounds write issue was found in the gtp_decode_pdp_ctx() function through the PDP context GSN-Address sub-field, leading to memory corruption. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the backup.restoreBackupWithLogs tRPC subscription builds database restore shell pipelines from the user-controlled databaseName and backupFile fields without safely separating them from shell syntax. packages/server/src/utils/restore/utils.ts interpolates databaseName into database-specific restore commands, while packages/server/src/utils/restore/postgres.ts and the analogous restore modules interpolate backupFile into rclone paths. An authenticated member with backup-restore permission can inject operating-system commands that execute in the Dokploy host context through execAsync or execAsyncRemote, even when no valid database container or backup file exists. This issue is fixed in version 0.29.13. |
| KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.12.0 until 1.21.2, 1.22.2, and 1.23.1, the v1alpha2 NodeUpgradeJob handler in edge/pkg/taskmanager/actions/nodeupgradejob.go concatenates authenticated user-controlled spec.version and spec.image values into the keadm upgrade edge shell command. A user with permission to create or update NodeUpgradeJob resources can supply shell metacharacters in either field, causing arbitrary commands to execute on targeted edge nodes with the privileges of the upgrade process and compromising node confidentiality, integrity, and availability. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1. |
| Fluent Bit is a fast and lightweight logs, metrics, and traces processor for Linux, BSD, macOS, and Windows. From 0.11.0 until 5.0.8, plugins/out_forward/forward.c secure_forward_pong copies the server-controlled PONG[2] reason into the 32-byte stack buffer msg with memcpy without checking its MessagePack type or length. An attacker who controls or can impersonate an out_forward Secure Forward destination configured with Shared_Key or Empty_Shared_Key can send an oversized reason during the first handshake and overwrite stack control data. Protected builds reliably terminate, while builds without a stack canary or with a disclosure can allow remote code execution as the Fluent Bit process user. When the opt-in --supervisor mode is used, fork-only respawns preserve the canary and address layout, allowing repeated crash-or-survive probes to support code execution on a hardened build; ordinary exec-based or service-manager restarts do not preserve that state. This issue is fixed in version 5.0.8. |
