| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim: fix cleanup after worker creation failure
vdpasim_create() leaves vdpasim->worker as an ERR_PTR when
kthread_run_worker() fails. The error path then drops the device
reference, which releases the partially initialized simulator.
vdpasim_free() unconditionally passes the worker pointer to
kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger
a general protection fault.
Store the worker error, clear the pointer, and only clean up the worker
when it was successfully initialized. Also make the release path tolerate
partially initialized objects by guarding virtqueue and IOTLB cleanup,
since the same release path can be reached from other initialization
failures.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/*
causes use-afer-free crash when either alloc_percpu() or dev_addr_init()
in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device
refcount tracker infrastructure") added ref_tracker_dir_exit() to only
free_netdev() path. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/hsmp: Reject negative power cap writes in hwmon
hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long
and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a
__u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write
to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge
unsigned value by the division and then stored into the u32 argument.
As a result a nonsensical, multi-gigawatt socket power limit is sent to
the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being
rejected.
Reject negative values with -EINVAL before the conversion.
Tested with HSMP enabled:
CAP=$(dirname $(grep -l amd_hsmp_hwmon \
/sys/class/hwmon/hwmon*/name | head -1))/power1_cap
# negative write
echo -1000000 > $CAP ; echo "ret=$?"
# valid positive write must still work
echo 400000000 > $CAP ; echo "ret=$?"
Before:
# echo -1000000 > $CAP ; echo "ret=$?"
ret=0 <- accepted; bogus limit sent to SMU
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0
After:
# echo -1000000 > $CAP ; echo "ret=$?"
bash: echo: write error: Invalid argument
ret=1 <- rejected with -EINVAL
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0 <- valid write still works |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: don't check the listener's sk_err in vsock_accept()
Syzbot reported an issue which can be reproduced with these steps:
r0 = socket(AF_VSOCK, SOCK_STREAM, 0)
bind(r0, {VMADDR_CID_ANY, PORT})
connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect)
listen(r0, backlog) -> 0
r1 = socket(AF_VSOCK, SOCK_STREAM, 0)
connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0
accept(r0) -> -1, EPROTO (stale sk_err)
Basically, it creates a socket (r0) and triggers a self-connect after
binding it. This self-connect fails with EPROTO because it loops back
to r0 while the socket is still in the TCP_SYN_SENT state, causing it
to be incorrectly dispatched to the connecting-client path. The
unexpected packet type encountered there sets sk_err to EPROTO.
After that, it invokes a listen() call on the same socket. This
listen() call succeeds because the kernel's listening path never
inspects or clears sk_err. Then, a new socket (r1) is created as a
normal client and connects to r0. However, vsock_accept() rejects this
incoming connection because the listener's sk_err still holds the
EPROTO error from the earlier failed self-connect.
This rejection causes the child socket created for r1's connection to
never be freed on virtio or hyperv transports; only the VMCI transport
implements pending_work to revisit and clean up a rejected socket.
For a non-blocking connect(), vsock_connect() may return -EINPROGRESS
immediately, and vsock_connect_timeout() can later set sk->sk_err
asynchronously.
Since no vsock transport ever sets sk_err on a socket while it is in
TCP_LISTEN state, checking it in vsock_accept() serves no purpose and
only carries forward errors left behind by earlier, unrelated
connection attempts on the same socket. Remove the checks so accept()
no longer rejects valid incoming connections because of a stale
error, which also avoids the resource leak described above. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: make ebt_snat ARP rewrite writable
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc5882a.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing. |
| In the Linux kernel, the following vulnerability has been resolved:
software node: Fix software_node_get_reference_args() with index -1
The bounds check for the index passed to
software_node_get_reference_args() was failing when passed UINT_MAX,
this in turn would lead to an out of bound access in the property
array. Fix the bound check to also cover the UINT_MAX case. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed
Previously, hinic3_send_one_skb() cached the skb fragment count before
calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to
skb_checksum_help() for unsupported tunnel packets, the skb may be
linearized. Continuing to build the TX descriptor with the stale
fragment count leads to a descriptor mismatch, which can trigger
out-of-bounds DMA reads or IOMMU faults.
Furthermore, the old code ignored the return value of skb_checksum_help(),
transmitting corrupted packets with incomplete checksums upon failure.
Fix this by:
1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to
ensure the correct fragment count is used if the SKB is linearized.
2. Propagating skb_checksum_help() errors and returning
HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pnfs: key the data server cache on the NFS version
nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath
address set alone, and struct nfs4_pnfs_ds records no version. That
suffices for the files layout driver, which always connects with version
4, but flexfiles takes its version tuple from GETDEVICEINFO per device,
and one address can legitimately serve both NFSv3 and NFSv4.
Two deviceids on one address with different ds_versions[0].version
therefore share a single nfs4_pnfs_ds, and whichever mirror connects
first pins ds_clp to its own version. The other one is handed that
client anyway, so it selects rpc_call_ops for a version the connection
does not speak, and the mismatched sequence-slot handling dereferences
NULL.
Add the version to the cache key so the two cannot alias, giving each
version its own nfs4_pnfs_ds and connection while both mirrors stay
usable. Only the major version is compared, since that is what selects
rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files
layout driver passes the 4 it already hardcodes at connect time. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: access chan->conn safely in get/setsockopt
Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref")
l2cap_chan::conn has held reference and remains non-NULL also after the
corresponding hci_conn is deleted. In this state accessing various
fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in
l2cap_sock_setsockopt() access of conn->hcon->hdev.
Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before
trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in
getsockopt/setsockopt to ensure it stays alive, and to avoid data races
in l2cap_chan fields. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan
For L2CAP sockets without owning sk->sk_socket, reading
l2cap_pi(sk)->chan may race against concurrent l2cap_sock_kill() ->
l2cap_sock_put_chan(). This excludes simultaneous proto_ops callbacks,
but access in l2cap_sock_cleanup_listen() has unsafe lockless read.
[Task 1] [Task 2 (hdev->workqueue)]
l2cap_sock_release(parent) l2cap_disconn_cfm
l2cap_sock_cleanup_listen l2cap_conn_del
bt_accept_dequeue l2cap_chan_del
lock_sock(sk) l2cap_sock_teardown_cb
bt_accept_unlink
bt_sk(sk)->parent = NULL
release_sock(sk) ----------------> lock_sock(sk)
parent = /* NULL */
lock_sock(sk) <--------------------- release_sock(sk)
sock_set_flag(sk, SOCK_ZAPPED)
l2cap_sock_close_cb
l2cap_sock_kill(sk)
l2cap_sock_put_chan
chan = READ l2cap_pi(sk)->chan l2cap_pi(sk)->chan = NULL
l2cap_chan_hold_unless_zero l2cap_put_chan(chan)
kref_get_unless_zero(&chan->ref)
Task 1 may observe NULL which causes null-ptr-deref.
Fix the race by taking lock_sock() in l2cap_sock_kill() to
synchronize with l2cap_sock_cleanup_listen(). hold_unless_zero() is not
needed here, l2cap_pi(sk)->chan owns reference if it is non-NULL.
Clarify code comments vs. locking. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: restore skb->dev on the slave failure path
teql_master_xmit() sets skb->dev = slave before calling the slave's
ndo_start_xmit(), but never restores it when that transmit fails. The
skb then walks on to the next slave still pointing at the previous one.
If a later slave has no resolved neighbour, teql_resolve() hands the skb
to neigh_event_send(), which queues it on that neighbour's arp_queue
with the stale skb->dev. skb->dev holds no reference, so deleting the
previous slave frees the net_device while the skb is still queued.
Whatever runs next on that skb - arp_error_report() on timeout, or
neigh_direct_output() -> dev_queue_xmit() once the neighbour resolves -
causes a UAF like the one below:
BUG: KASAN: slab-use-after-free in __icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
Read of size 4 at addr ffff888106e100b0 by task flood_packet/527
CPU: 0 UID: 0 PID: 527 Comm: flood_packet Not tainted 7.2.0-rc6-g594d90519502 #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
? __pfx__raw_spin_lock_irqsave (./include/asm-generic/qrwlock.h:122 (discriminator 4))
? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
kasan_report (mm/kasan/report.c:595)
? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
__icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
[...]
ipv4_link_failure (net/ipv4/route.c:1251 net/ipv4/route.c:1258)
? __pfx_ipv4_link_failure (./include/linux/skbuff.h:4327)
? _raw_write_lock (./include/linux/instrumented.h:55 ./include/linux/atomic/atomic-instrumented.h:1301 ./include/asm-generic/qrwlock.h:98 ./include/linux/rwlock_api_smp.h:230 kernel/locking/spinlock.c:304)
? __pfx__raw_write_lock (kernel/locking/spinlock.c:175)
arp_error_report (./include/net/dst.h:438 net/ipv4/arp.c:296)
neigh_invalidate (net/core/neighbour.c:1077)
neigh_timer_handler (net/core/neighbour.c:1169)
[...]
Allocated by task 505:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5334 mm/slub.c:6905)
alloc_netdev_mqs (net/core/dev.c:12055 (discriminator 2))
rtnl_create_link (net/core/rtnetlink.c:3721)
rtnl_newlink (net/core/rtnetlink.c:3903 net/core/rtnetlink.c:4044 net/core/rtnetlink.c:4159)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
[...]
Freed by task 536:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6377 mm/slub.c:6692)
device_release (drivers/base/core.c:2636)
kobject_put (lib/kobject.c:689 lib/kobject.c:720 ./include/linux/kref.h:65 lib/kobject.c:737)
netdev_run_todo (net/core/dev.c:11756)
rtnl_dellink (net/core/rtnetlink.c:157 ./include/linux/rtnetlink.h:135 net/core/rtnetlink.c:3651)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
[...]
Fix this by restoring skb->dev to the master at the end of each slave's
iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: acomp - allocate async request context when cloning
ACOMP_REQUEST_ON_STACK() reserves only enough storage for the
synchronous fallback. When an async implementation is selected, callers
clone that stack request before retrying, but acomp_request_clone()
currently copies only the stack-sized object. The clone therefore has no
storage for the async provider request context, and providers such as QAT
write past the allocation through acomp_request_ctx(). KASAN does report
a slab OOB write.
Allocate a zeroed clone large enough for the runtime acomp request size,
copy only the bytes present in the source object, and preserve the
existing fallback-on-allocation-failure behavior. Use the runtime reqsize
because an implementation may adjust it during tfm initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: validate banner payload length
When parsing the Ceph messenger v2 protocol banner, the `payload_len` field
is decoded from the banner prefix. If a client sends a banner with a
`payload_len` of 0, the kernel sets up a 0-length socket read. This
violates an invariant in the state machine, triggering a warning in
`populate_in_iter()`:
------------[ cut here ]------------
!iov_iter_count(&con->v2.in_iter)
WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter
net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070
WARNING: net/ceph/messenger_v2.c:3129 at ceph_con_v2_try_read+0x6634/0x6810
net/ceph/messenger_v2.c:3159, CPU#1: kworker/1:3/5070
...
Call Trace:
<TASK>
ceph_con_workfn+0x1f5/0x14a0 net/ceph/messenger.c:1575
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
According to the msgr2 protocol specification, the banner payload is
expected to contain at least two 64-bit integers (`server_feat` and
`server_req_feat`). Therefore, `payload_len` must be at least 16 bytes.
Fix this by adding a check in `process_banner_prefix()` to reject a
`payload_len` smaller than 16 bytes. This prevents the 0-length read and
correctly aborts the connection with a protocol error. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: move hardware offload step after building the chain blob
Allocate the chain blob before the ruleset offload to reduce chances of
entering an inconsistent state where the offloaded ruleset in the nic
and the software ruleset differ. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
Since the RX path was converted to zero-copy, the page pool page is handed
to the stack directly as the skb head, and the offset the DMA engine writes
at is what determines the alignment of the packet headers.
Before the conversion the payload was copied into an skb obtained from
napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The
conversion moved the headroom into stmmac_rx_offset() but did not carry
over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP
header now lands misaligned:
64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98
Same for the XDP branch:
256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290
On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses
even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set.
Any received echo request panics the machine, e.g:
Unhandled fault: alignment exception (0x001) at 0x81873062
Internal error: : 1 [#1] SMP ARM
Hardware name: Altera SOCFPGA Arria10
PC is at icmp_echo+0x38/0xa8
LR is at icmp_rcv+0x22c/0x370
Call trace:
icmp_echo from icmp_rcv+0x22c/0x370
icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224
ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0
ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50
ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118
ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc
ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0
...
napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030
Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003)
Kernel panic - not syncing: Fatal exception in interrupt
The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo().
Fix by adding NET_IP_ALIGN back to the RX offset, which restores the
alignment the stack used to get.
Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar
change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert
"stmmac: align RX buffers"") because it caused packet corruption. That
patch raised the offset from 0 without adjusting the buffer size
accounting, so the DMA engine could arguably write past the end of the RX
buffers, though this was never root caused.
Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX
path") since derives the page pool allocation from stmmac_rx_offset(), so
the extra bytes are accounted for. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read
in slip_receive_buf() when racing against tty hangup.
tty_ldisc_hangup() calls ld->ops->hangup() while holding only
a read lock on tty->ldisc_sem (via tty_ldisc_ref()).
Because slip_hangup() simply called slip_close(), it ran concurrently
with reader functions such as slip_receive_buf().
slip_close() unregisters and frees the net device and its private
struct slip, causing concurrent reader threads in slip_receive_buf()
to dereference freed memory.
Line discipline close() is already guaranteed to be called under
the write lock of tty->ldisc_sem during hangup processing
(in tty_ldisc_reinit() or tty_ldisc_kill()).
Remove slip_hangup() so teardown is serialized cleanly by slip_close(). |
