| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Purge async_hold in tls_decrypt_async_wait()
The async_hold queue pins encrypted input skbs while
the AEAD engine references their scatterlist data. Once
tls_decrypt_async_wait() returns, every AEAD operation
has completed and the engine no longer references those
skbs, so they can be freed unconditionally.
A subsequent patch adds batch async decryption to
tls_sw_read_sock(), introducing a new call site that
must drain pending AEAD operations and release held
skbs. Move __skb_queue_purge(&ctx->async_hold) into
tls_decrypt_async_wait() so the purge is centralized
and every caller -- recvmsg's drain path, the -EBUSY
fallback in tls_do_decryption(), and the new read_sock
batch path -- releases held skbs on synchronization
without each site managing the purge independently.
This fixes a leak when tls_strp_msg_hold() fails part-way through,
after having added some cloned skbs to the async_hold
queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to
process all pending decrypts, and drop back to synchronous mode, but
tls_sw_recvmsg() only flushes the async_hold queue when one record has
been processed in "fully-async" mode, which may not be the case here.
[pabeni@redhat.com: added leak comment] |
| In the Linux kernel, the following vulnerability has been resolved:
clsact: Fix use-after-free in init/destroy rollback asymmetry
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bpf: defer hook memory release until rcu readers are done
Yiming Qian reports UaF when concurrent process is dumping hooks via
nfnetlink_hooks:
BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0
Read of size 8 at addr ffff888003edbf88 by task poc/79
Call Trace:
<TASK>
nfnl_hook_dump_one.isra.0+0xe71/0x10f0
netlink_dump+0x554/0x12b0
nfnl_hook_get+0x176/0x230
[..]
Defer release until after concurrent readers have completed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix potential NULL pointer dereference in header processing
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Fix race condition in tls_sw_cancel_work_tx()
This issue was discovered during a code audit.
After cancel_delayed_work_sync() is called from tls_sk_proto_close(),
tx_work_handler() can still be scheduled from paths such as the
Delayed ACK handler or ksoftirqd.
As a result, the tx_work_handler() worker may dereference a freed
TLS object.
The following is a simple race scenario:
cpu0 cpu1
tls_sk_proto_close()
tls_sw_cancel_work_tx()
tls_write_space()
tls_sw_write_space()
if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask))
set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask);
cancel_delayed_work_sync(&ctx->tx_work.work);
schedule_delayed_work(&tx_ctx->tx_work.work, 0);
To prevent this race condition, cancel_delayed_work_sync() is
replaced with disable_delayed_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: Fix race condition in espintcp_close()
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cached_fid bitfields to avoid shared-byte RMW races
is_open, has_lease and on_list are stored in the same bitfield byte in
struct cached_fid but are updated in different code paths that may run
concurrently. Bitfield assignments generate byte read–modify–write
operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can
restore stale values of the others.
A possible interleaving is:
CPU1: load old byte (has_lease=1, on_list=1)
CPU2: clear both flags (store 0)
CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits
To avoid this class of races, convert these flags to separate bool
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: cancel mlo_scan_start_wk
mlo_scan_start_wk is not canceled on disconnection. In fact, it is not
canceled anywhere except in the restart cleanup, where we don't really
have to.
This can cause an init-after-queue issue: if, for example, the work was
queued and then drv_change_interface got executed.
This can also cause use-after-free: if the work is executed after the
vif is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: add bounds check for if_id in IRQ handler
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to
ioq_vector. If request_irq() fails part-way, the rollback loop calls
free_irq() with dev_id set to 'oct', which does not match the original
dev_id and may leave the irqaction registered.
This can keep IRQ handlers alive while ioq_vector is later freed during
unwind/teardown, leading to a use-after-free or crash when an interrupt
fires.
Fix the error path to free IRQs with the same ioq_vector dev_id used
during request_irq(). |
| The Wp Map Block plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the set_status() and bulk() functions in the Maps_Controller REST controller in versions up to, and including, 3.0.0. The plugin's permission_callback (can_edit()) only verifies current_user_can('edit_posts') and performs no object-level ownership check or verification of publish-level capabilities, while the handlers pass the caller-controlled map ID directly to wp_update_post() (and wp_delete_post() in the bulk delete branch) to change post_status between publish and draft. This makes it possible for authenticated attackers, with Contributor-level access and above, to publish or unpublish (and bulk-delete) any wpmb_map post, including maps owned by administrators, which hides published maps from all public pages site-wide or forces draft maps to become publicly visible. |
| Mattermost versions 11.10.x <= 11.10.0, 11.7.x <= 11.7.9, 11.9.x <= 11.9.1, 11.8.x <= 11.8.5 fail to validate the invited recipient's email address when redeeming team and guest invitation tokens, which allows an authenticated attacker to join a team or gain unauthorized access to private channels via a forwarded or leaked invitation link.. Mattermost Advisory ID: MMSA-2026-00747 |
| Mattermost versions 11.10.x <= 11.10.0, 11.7.x <= 11.7.9, 11.9.x <= 11.9.1, 11.8.x <= 11.8.5 fail to verify the integrity of the SAML RelayState POST parameter which allows an authenticated SAML user to join any team, including invite-only teams, via forging the team_id or invite_id fields in the RelayState.. Mattermost Advisory ID: MMSA-2026-00727 |
| The The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.2.8. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes. |
| crmeb_java through 3.1 contains an authorization bypass vulnerability that allows authenticated members to read other members' orders by supplying their order numbers. Attackers can request /api/front/order/express/{orderId} or /api/front/order/apply/refund/{orderId} to view victims' tracking numbers, logistics traces, payment amounts and product lines. |
