| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for arena-related insns
Since the interpreter does not support the arena-related insns,
interpreter fallback should not be allowed for these insns in
core.c::__bpf_prog_select_runtime().
Currently, when the interpreter executes the arena ST/LDX/STX insns,
it would hit the BUG_ON() in ___bpf_prog_run() at run time.
[ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0)
[ 2.579998] ------------[ cut here ]------------
[ 2.580652] kernel BUG at kernel/bpf/core.c:2349!
[ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when arena map is used in the prog to disallow
interpreter fallback for arena-related insns. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for gotox insn
The interpreter does not recognize the BPF_JMP|BPF_JA|BPF_X insn, which
is used for insn_array map. Thereafter, it would hit the BUG_ON() in
___bpf_prog_run() at run time.
[ 2.563726] BPF interpreter: unknown opcode 0d (imm: 0x0)
[ 2.564557] ------------[ cut here ]------------
[ 2.565206] kernel BUG at kernel/bpf/core.c:2349!
[ 2.565882] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when insn_array map is used in the prog in
order to disallow interpreter fallback for gotox insn in
core.c::__bpf_prog_select_runtime(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Terminate all descriptors without callbacks
The DMA Engine client documentation says in the "Terminate APIs" section
of Documentation/driver-api/dmaengine/client.rst:
"No callback functions will be called for any incomplete transfers."
dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches
the interrupt handler. This schedules a callback for the active descriptor
and leaves other issued or submitted descriptors queued. A late callback
after dmaengine_terminate_sync() can dereference client state that has
already been freed, while leftover descriptors may later restart into
reused buffers or leak.
Move all issued and submitted descriptors to the terminated list whenever
termination completes. For a pending STOP, do this from both the DONE and
ABORT paths. Complete their cookies in order without scheduling callbacks.
A STOP can remain pending until the running transfer raises an
interrupt. Make device_synchronize() wait for such a pending STOP to
complete before releasing terminated descriptors. Reuse it from
free_chan_resources(), then release the remaining virt-dma resources.
Sleep instead of busy-polling while waiting, and warn if the existing
timeout expires. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize abort state updates
dw_edma_abort_interrupt() drops vc.lock before changing request and
status. issue_pending() can acquire the lock in that small window,
observe the old busy state, and skip starting queued descriptors. Then
the abort handler overwrites the channel status as idle, leaving the new
descriptors stranded for good.
Keep descriptor completion and the state transition in the same critical
section. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all()
leaves the stale request behind, so even reconfiguring the channel does not
recover it.
issue_pending() already runs under vc.lock, but it tests configured before
taking it. Move that test under the lock as well, so configured, request,
and status are evaluated as one channel-state snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: Keep link pointers valid on realloc failure
meson_card_reallocate_links() grows the DAI link and private data
arrays with two consecutive krealloc() calls and updates the owner
pointers only after both calls have succeeded.
A successful krealloc() may move the data: it frees the old block and
returns a new one. When that happens for the link array and the second
krealloc() then fails, card->dai_link still points to the block that
krealloc() already freed, and the error path frees the new block too.
The probe error path then calls meson_card_clean_references(), which
dereferences card->dai_link and kfree()s it again, resulting in a
use-after-free and a double free.
Commit card->dai_link and card->num_links right after the first
krealloc() succeeds, so the pointer always refers to a valid allocation
that meson_card_clean_references() can walk and free. krealloc() with
__GFP_ZERO zero-initializes the added entries, so walking them on the
error path is safe. With both failure paths reduced to a plain return,
drop the goto labels and the error message. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad5686: missing NULL check on match data
Verify that chip_info pointer is not NULL. If a user binds the driver
using driver_override via sysfs with a device name not present in the
id_table or of_match_table, match data will be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Propagate sdma_txinit_ahg() errors
set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg().
If sdma_txinit_ahg() fails, it returns before initializing tx->txreq.
However, set_txreq_header_ahg() ignores the error and returns the AHG
change count, causing the caller to continue processing the request as
though initialization had succeeded.
Propagate sdma_txinit_ahg() failures to the caller and abort request
processing when initialization fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[]
For a user QP, qp->sq.queue is a ring the application writes directly,
so rxe_post_send() takes the is_user branch and only schedules send_task
without validating the WQE. rxe_requester() consumes it in place via
req_next_wqe() and calls copy_data(), which indexes
&wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge.
Only the kernel path bounds num_sge (validate_send_wr()); the user WQE
is never checked, so a local unprivileged user can post a WQE with an
out-of-range cur_sge or oversized num_sge and force an out-of-bounds
read of the per-WQE sge array in copy_data() (vmalloc OOB read, local
DoS).
Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way
get_srq_wqe() already guards SRQ entries, and bound cur_sge only when
the WQE carries payload (dma.resid): copy_data() returns early on a
zero-length copy before touching dma->sge[], so a zero-payload WQE --
the only kind a max_sge == 0 QP can post -- stays valid.
Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
When its_irq_gic_domain_alloc() fails, the following
its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the
corresponding interrupt, which leaks the resource.
Invoke its_vpe_teardown() in the error handling path to avoid the leak.
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: validate dynamic counter attribute length
RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are
consumed directly with nla_get_u32(). The top-level policy validates only
the container, so it does not establish the fixed shape of each child.
Require every child payload to be exactly one u32 before reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: validate MADT IOAPIC entry bounds
The IOAPIC hotplug lookup parses both MADT and _MAT records directly.
The MADT walk previously used a subtable's declared length to advance
the cursor after only locating a generic header. The _MAT path likewise
passed a generic header to the IOAPIC helper.
Validate that a current record has a complete generic header, that its
declared length is contained in the available record range, and that a
typed IOAPIC record contains the full fixed IOAPIC body before reading
its fields. Use the same relation for both MADT and _MAT provider
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
acpi_pci_root_add() assigns the freshly allocated root to
device->driver_data before dmar_device_add() and pci_acpi_scan_root().
Both failure paths reach the end: label where root is kfree()'d, but
only the pci_acpi_scan_root() path clears driver_data first.
When dmar_device_add() fails during a hot-add, root is freed while
device->driver_data still points at it. The ACPI core does not clear
driver_data on attach failure, so a later acpi_pci_find_root() call may
dereference this dangling pointer.
acpi_pci_root_remove() has the same problem: it frees root without
clearing device->driver_data, leaving a dangling pointer behind after
the root bridge is removed.
Move the NULL assignment to the shared end: label so every error path in
acpi_pci_root_add() clears driver_data before freeing root, and clear it
in acpi_pci_root_remove() as well, so the object is never left reachable
through driver_data after being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Zero queue and stack outputs on lock failure
Queue and stack pop/peek helpers accept an uninitialized output buffer
because the verifier expects the helper to initialize it. The empty-map
error path clears the buffer, but a failed lock acquisition returns
-EBUSY without writing it.
Clear the output before returning -EBUSY so BPF programs cannot observe
uninitialized stack contents after a failed helper call. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix memory leak in bpf_jit_free
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts
and calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a
memory leak of the JIT context offsets array.
Fix this by adding the missing kfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix kernel stack corruption in tailcall with CFI
When CONFIG_CFI_CLANG is enabled, prog->bpf_func already skips the kcfi
instruction during setup. Including it again in the tailcall jump offset
causes it to jump over an extra 4 bytes, skipping the stack pointer
adjustment, which will result in kernel stack corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, riscv: Fix extable handling for arena load_acquire
emit_atomic_ld_st() returns 1 to have build_body() skip the zext after
a sub-word load_acquire. The caller does "ret = ret ?:
add_exception_handler(...)", which skips add_exception_handler() on any
non-zero ret, so the extable entry is missing and a faulting
PROBE_ATOMIC load_acquire oopses.
REG_DONT_CLEAR_MARKER leaves rd stale on fault, and the verifier still
thinks the load overwrote it, so a program can leak it through a map.
Check ret >= 0 before calling add_exception_handler(), and pass rd for
LOAD_ACQ so the fault zeroes rd like a PROBE_MEM load. Return ret
unchanged for the zext skip. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix offset warn check for bpf_res_spin_lock
Sashiko pointed out correctly that the case statement for
BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK.
Fix it by checking res_spin_lock_off instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve unique-field state across nested structs
btf_find_struct_field() initializes a fresh seen mask for every recursive
descent. Unique special fields in different levels of the same aggregate
therefore do not see one another. The duplicate fields can reach
btf_parse_fields(), where they trigger an invariant WARN_ON_ONCE(). A
crafted user BTF can consequently trigger the warning before map creation
checks capabilities.
Initialize the seen mask once in btf_find_field() and pass the same pointer
through struct, datasec, and nested-struct walks. This gives the entire field
traversal one shared uniqueness state. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Fix CEQ tasklet use-after-free on removal
Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls
erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring
through get_next_valid_eqe() and updates eq->dbrec through notify_eq().
erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ.
free_irq() prevents another hard IRQ and waits for an in-flight handler,
but it does not drain a tasklet that the handler already scheduled. The
tasklet can therefore access eq->qbuf or eq->dbrec after
erdma_eq_destroy() frees them.
Clearing ceq_cb->ready does not synchronize with a tasklet that already
passed the check at the start of erdma_ceq_completion_handler().
Kill the tasklet after free_irq(), when no handler can schedule it again,
and before erdma_ceq_uninit_one() releases the EQ buffers. |
