| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wazuh SIEM version 4.8.2 is affected by a broken access control vulnerability. This issue allows the unauthorized creation of internal users without assigning any existing user role, potentially leading to privilege escalation or unauthorized access to sensitive resources. |
| Polkit authentication dis isabled by default and a race
condition in the Polkit authorization check in versions before v0.69.0 can
lead to the same issues as in CVE-2025-66005. |
| Westermo EDW-100 devices through 2024-05-03 have a hidden root user account with a hardcoded password that cannot be changed. NOTE: this is a serial-to-Ethernet converter that should not be placed at the edge of the network. |
| Improper access control in BMC Firmware for the Intel(R) Server Board S2600WF, Intel(R) Server Board S2600ST, Intel(R) Server Board S2600BP, before version 02.01.0017 and Intel(R) Server Board M50CYP and Intel(R) Server Board D50TNP before version R01.01.0009 may allow an authenticated user to enable escalation of privilege via local access. |
| A vulnerability was identified in SiempreCMS up to 1.3.6. This vulnerability affects unknown code of the file /docs/admin/file_upload.php. Such manipulation leads to unrestricted upload. The attack may be launched remotely. The exploit is publicly available and might be used. |
| Improper Access Control in some Thunderbolt(TM) Share software before version 1.0.49.9 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper access control in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| Improper access control in some Intel(R) CST before version 2.1.10300 may allow an authenticated user to potentially enable denial of service via local access. |
| Incorrect access control in radar v1.0.8 allows attackers to bypass authentication and access sensitive APIs without a token. |
| Pluto is a superset of Lua 5.4 with a focus on general-purpose programming. In affected versions an attacker with the ability to actively intercept network traffic would be able to use a specifically-crafted certificate to fool Pluto into trusting it to be the intended remote for the TLS session. This results in the HTTP library and socket.starttls providing less transport integrity than expected. This issue has been patched in pull request #851 which has been included in version 0.9.3. Users are advised to upgrade. there are no known workarounds for this vulnerability. |
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. |
| A vulnerability classified as problematic has been found in Amcrest IP2M-841B, IP2M-841W, IPC-IP2M-841B, IPC-IP3M-943B, IPC-IP3M-943S, IPC-IP3M-HX2B and IPC-IPM-721S up to 20241211. This affects an unknown part of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in Cisco Catalyst Center Virtual Appliance could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to perform unauthorized modifications to the system, including creating new user accounts or elevating their own privileges on an affected system. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. A vulnerability was discovered in the BeyondTrust provider implementation for External Secrets Operator versions 0.10.1 through 0.19.2. The provider previously retrieved Kubernetes secrets directly, without validating the namespace context or the type of secret store. This allowed unauthorized cross-namespace secret access, violating security boundaries and potentially exposing sensitive credentials. In version 0.20.0, the provider code was updated to use the `resolvers.SecretKeyRef` utility, which enforces namespace validation and only allows cross-namespace access for `ClusterSecretStore` types. This ensures secrets are only retrieved from the correct namespace, mitigating the risk of unauthorized access. All users should upgrade to the latest version containing this fix. As a workaround, use a policy engine such as Kyverno or OPA to prevent using BeyondTrust provider and/or validate the `(Cluster)SecretStore` and ensure the namespace may only be set when using a `ClusterSecretStore`. |
| Lavasoft Web Companion (also known as Ad-Aware WebCompanion) versions 8.9.0.1091 through 12.1.3.1037 installs the DCIService.exe service with an unquoted service path vulnerability. An attacker with write access to the file system could potentially execute arbitrary code with elevated privileges by placing a malicious executable in the unquoted path. |
| Improper access control for some Intel(R) Graphics software may allow an authenticated user to potentially enable denial of service via local access. |
| Each Italy Wireless Mini Router WIRELESS-N 300M v28K.MiniRouter.20190211 was discovered to store the Administrator password. |
| An Improper Certificate Validation could allow a malicious actor with access to an adjacent network to take control of the system.
Affected Products:
UniFi Connect Application (Version 3.7.9 and earlier)
UniFi Connect EV Station (Version 1.1.18 and earlier)
UniFi Connect EV Station Pro (Version 1.1.18 and earlier)
UniFi Connect Display (Version 1.9.324 and earlier)
UniFi Connect Display Cast (Version 1.6.225 and earlier)
Mitigation:
Update UniFi Connect Application to Version 3.10.7 or later.
Update UniFi Connect EV Station to Version 1.2.15 or later.
Update UniFi Connect EV Station Pro to Version 1.2.15 or later.
Update UniFi Connect Display to Version 1.11.348 or later.
Update UniFi Connect Display Cast to Version 1.8.255 or later.
|
| A vulnerability, which was classified as critical, was found in Lumsoft ERP 8. Affected is the function DoUpload/DoWebUpload of the file /Api/FileUploadApi.ashx. The manipulation of the argument file leads to unrestricted upload. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| Improper access control for some Intel(R) Arc™ & Iris(R) Xe graphics software before version 32.0.101.6077 may allow an authenticated user to potentially enable denial of service via local access. |
