| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix memory leak when a wq is reset
idxd_wq_disable_cleanup() which is called from the reset path for a
workqueue, sets the wq type to NONE, which for other parts of the
driver mean that the wq is empty (all its resources were released).
Only set the wq type to NONE after its resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: fix divide-by-zero in rtsc_min()
m2sm() converts a u32 slope to a u64 scaled value. For large inputs
(e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores
the difference of two such u64 values in a u32 variable `dsm` and
uses it as a divisor. When the difference is exactly 2^32 the
truncation yields zero, causing a divide-by-zero oops in the
concave-curve intersection path:
Oops: divide error: 0000
RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601)
Call Trace:
init_ed (net/sched/sch_hfsc.c:629)
hfsc_enqueue (net/sched/sch_hfsc.c:1569)
[...]
Widen `dsm` to u64 and replace do_div() with div64_u64() so the full
difference is preserved. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
======================================================================= |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: drop logically empty buckets in mtype_del
mtype_del() counts empty slots below n->pos in k, but it only drops the
bucket when both n->pos and k are zero. This misses buckets whose live
entries have all been removed while n->pos still points past deleted slots.
Treat a bucket as empty when all positions below n->pos are unused and
release it directly instead of shrinking it further. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix overflow when accumulating packets
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: account for netlink header size
This is a followup to an old bug fix: NLMSG_DONE needs to account
for the netlink header size, not just the attribute size.
This can result in a WARN splat + drop of the netlink message,
but other than this there are no ill effects. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix crash due to unvalidated vcc pointer in sigd_send()
Reproducer available at [1].
The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc
pointer from msg->vcc and uses it directly without any validation. This
pointer comes from userspace via sendmsg() and can be arbitrarily forged:
int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0);
ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon
struct msghdr msg = { .msg_iov = &iov, ... };
*(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer
sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef
In normal operation, the kernel sends the vcc pointer to the signaling
daemon via sigd_enq() when processing operations like connect(), bind(),
or listen(). The daemon is expected to return the same pointer when
responding. However, a malicious daemon can send arbitrary pointer values.
Fix this by introducing find_get_vcc() which validates the pointer by
searching through vcc_hash (similar to how sigd_close() iterates over
all VCCs), and acquires a reference via sock_hold() if found.
Since struct atm_vcc embeds struct sock as its first member, they share
the same lifetime. Therefore using sock_hold/sock_put is sufficient to
keep the vcc alive while it is being used.
Note that there may be a race with sigd_close() which could mark the vcc
with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns.
However, sock_hold() guarantees the memory remains valid, so this race
only affects the logical state, not memory safety.
[1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix use-after-free access to PTP clock
PTP clock is registered on every opening of the interface and destroyed on
every closing. However it may be accessed via get_ts_info ethtool call
which is possible while the interface is just present in the kernel.
BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
Read of size 4 at addr ffff8880194345cc by task syz.0.6/948
CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
print_address_description mm/kasan/report.c:316 [inline]
print_report+0x17f/0x496 mm/kasan/report.c:420
kasan_report+0xd9/0x180 mm/kasan/report.c:524
ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349
macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371
__ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558
ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline]
__dev_ethtool net/ethtool/ioctl.c:3017 [inline]
dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 457:
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:699 [inline]
ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235
gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375
macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920
__dev_open+0x2ce/0x500 net/core/dev.c:1501
__dev_change_flags+0x56a/0x740 net/core/dev.c:8651
dev_change_flags+0x92/0x170 net/core/dev.c:8722
do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833
__rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608
rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655
rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150
netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x14b/0x180 net/socket.c:730
__sys_sendto+0x320/0x3b0 net/socket.c:2152
__do_sys_sendto net/socket.c:2164 [inline]
__se_sys_sendto net/socket.c:2160 [inline]
__x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 938:
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1729 [inline]
slab_free_freelist_hook mm/slub.c:1755 [inline]
slab_free mm/slub.c:3687 [inline]
__kmem_cache_free+0xbc/0x320 mm/slub.c:3700
device_release+0xa0/0x240 drivers/base/core.c:2507
kobject_cleanup lib/kobject.c:681 [inline]
kobject_release lib/kobject.c:712 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1cd/0x350 lib/kobject.c:729
put_device+0x1b/0x30 drivers/base/core.c:3805
ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391
gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404
macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966
__dev_close_many+0x1b9/0x310 net/core/dev.c:1585
__dev_close net/core/dev.c:1597 [inline]
__dev_change_flags+0x2bb/0x740 net/core/dev.c:8649
dev_change_fl
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - Fix OOM ->tfm_count leak
If memory allocation fails, decrement ->tfm_count to avoid blocking
future reads. |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. Prior to version 1.68.1, the nghttp2 library stops reading the incoming data when user facing public API `nghttp2_session_terminate_session` or `nghttp2_session_terminate_session2` is called by the application. They might be called internally by the library when it detects the situation that is subject to connection error. Due to the missing internal state validation, the library keeps reading the rest of the data after one of those APIs is called. Then receiving a malformed frame that causes FRAME_SIZE_ERROR causes assertion failure. nghttp2 v1.68.1 adds missing state validation to avoid assertion failure. No known workarounds are available. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix statistics allocation
The controller per-cpu statistics is not allocated until after the
controller has been registered with driver core, which leaves a window
where accessing the sysfs attributes can trigger a NULL-pointer
dereference.
Fix this by moving the statistics allocation to controller allocation
while tying its lifetime to that of the controller (rather than using
implicit devres). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: Avoid boot crash in RedBoot partition table parser
Given CONFIG_FORTIFY_SOURCE=y and a recent compiler,
commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when
available") produces the warning below and an oops.
Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000
------------[ cut here ]------------
WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1
memcmp: detected buffer overflow: 15 byte read of buffer size 14
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE
As Kees said, "'names' is pointing to the final 'namelen' many bytes
of the allocation ... 'namelen' could be basically any length at all.
This fortify warning looks legit to me -- this code used to be reading
beyond the end of the allocation."
Since the size of the dynamic allocation is calculated with strlen()
we can use strcmp() instead of memcmp() and remain within bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: fix race condition in qman_destroy_fq
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardown
A potential race condition exists in mana_hwc_destroy_channel() where
hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and
Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt
handler to dereference freed memory, leading to a use-after-free or
NULL pointer dereference in mana_hwc_handle_resp().
mana_smc_teardown_hwc() signals the hardware to stop but does not
synchronize against IRQ handlers already executing on other CPUs. The
IRQ synchronization only happens in mana_hwc_destroy_cq() via
mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs
after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()
can dereference freed caller_ctx (and rxq->msg_buf) in
mana_hwc_handle_resp().
Fix this by reordering teardown to reverse-of-creation order: destroy
the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This
ensures all in-flight interrupt handlers complete before the memory they
access is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: runtime: Fix a race condition related to device removal
The following code in pm_runtime_work() may dereference the dev->parent
pointer after the parent device has been freed:
/* Maybe the parent is now able to suspend. */
if (parent && !parent->power.ignore_children) {
spin_unlock(&dev->power.lock);
spin_lock(&parent->power.lock);
rpm_idle(parent, RPM_ASYNC);
spin_unlock(&parent->power.lock);
spin_lock(&dev->power.lock);
}
Fix this by inserting a flush_work() call in pm_runtime_remove().
Without this patch blktest block/001 triggers the following complaint
sporadically:
BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160
Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x8b/0x310
print_report+0xfd/0x1d7
kasan_report+0xd8/0x1d0
__kasan_check_byte+0x42/0x60
lock_acquire.part.0+0x38/0x230
lock_acquire+0x70/0x160
_raw_spin_lock+0x36/0x50
rpm_suspend+0xc6a/0xfe0
rpm_idle+0x578/0x770
pm_runtime_work+0xee/0x120
process_one_work+0xde3/0x1410
worker_thread+0x5eb/0xfe0
kthread+0x37b/0x480
ret_from_fork+0x6cb/0x920
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_alloc_info+0x3d/0x50
__kasan_kmalloc+0xa0/0xb0
__kmalloc_noprof+0x311/0x990
scsi_alloc_target+0x122/0xb60 [scsi_mod]
__scsi_scan_target+0x101/0x460 [scsi_mod]
scsi_scan_channel+0x179/0x1c0 [scsi_mod]
scsi_scan_host_selected+0x259/0x2d0 [scsi_mod]
store_scan+0x2d2/0x390 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
do_syscall_64+0xee/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_free_info+0x3f/0x50
__kasan_slab_free+0x67/0x80
kfree+0x225/0x6c0
scsi_target_dev_release+0x3d/0x60 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_dev_release+0xacf/0x12c0 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_put+0x7f/0xc0 [scsi_mod]
sdev_store_delete+0xa5/0x120 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810 |
