| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in FLVMeta up to 1.2.2. Affected by this vulnerability is the function amf_object_get of the file src/amf.c of the component AMF Object Parsing. This manipulation causes null pointer dereference. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: 52642f7dfb76ec7334016622dde60b1ae963d79b. To fix this issue, it is recommended to deploy a patch. The project maintainer doubts the security impact: "While I acknowledged the bugs and provided fixes, I have yet to see any way to exploit these alleged vulnerabilities." |
| A null pointer dereference vulnerability exists in the server-side session management logic of ccoap 77f55c4b466e99327c24ace8a2913d3ba7e2ccd5. The issue is caused by a race condition between the request dispatch thread and the session cleanup thread when accessing shared session list nodes without proper synchronization. |
| A NULL pointer dereference in the get_min_buffer_size function (/libswscale/slice.c) of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted video file. |
| A NULL pointer dereference in the UDMC registration handler component of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via supplying crafted payload. |
| A NULL pointer dereference in the CDR processing path of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via supplying crafted payload. |
| X.509IF protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: use READ_ONCE() for dev->driver in dev_has_sync_state()
dev_has_sync_state() reads dev->driver twice without holding
device_lock() -- once for the NULL check and once to dereference
->sync_state. Some callers only hold device_links_write_lock, which
doesn't prevent a concurrent unbind from clearing dev->driver via
device_unbind_cleanup().
Fix it by reading dev->driver exactly once with READ_ONCE(), pairing
with the WRITE_ONCE() in device_set_driver(). |
| RAOP module accepts unbounded Content-Length values and does not check the pw_array_add() return. |
| In the Linux kernel, the following vulnerability has been resolved:
net: emac: Fix NULL pointer dereference in emac_probe
Move devm_request_irq() after devm_platform_ioremap_resource() so that
dev->emacp is mapped before the interrupt handler can fire. An early
interrupt hitting emac_irq() would dereference the NULL dev->emacp and
crash.
Also remove redundant error message. devm_platform_ioremap_resource()
already returns an error message with dev_err_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: guard against possible NULL deref in __in6_dev_stats_get()
dev_get_by_index_rcu() could return NULL if the original physical
device is unregistered.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject compressed segment that overflows the compressed input
lzo_decompress_bio() validates each on-disk segment length seg_len only
against the workspace cbuf size, not against the compressed input size
(compressed_len, the total folio bytes of the bio). A crafted extent can
carry a segment whose seg_len passes the cbuf check but runs past the end
of the bio, so copy_compressed_segment() walks off the last folio:
get_current_folio() then returns the NULL folio from bio_next_folio(), and
with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults.
BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383)
Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29
Workqueue: btrfs-endio simple_end_io_work
kasan_report (mm/kasan/report.c:590)
lzo_decompress_bio (fs/btrfs/lzo.c:383)
end_bbio_compressed_read (fs/btrfs/compression.c:1065)
btrfs_bio_end_io (fs/btrfs/bio.c:135)
btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285)
simple_end_io_work
process_one_work
worker_thread
Reject any segment whose payload would extend beyond compressed_len before
copying it, treating it as corruption like the other on-disk validation
failures in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE
In the iblock_execute_pr_out() function, PRO_PREEMPT,
PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability
checks through ops->pr_clear. The error check allows unimplemented hooks
to pass through the gate, resulting dereferencing a NULL function
pointer.
Check whether the hooks that need to be called are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: Fix slave registration race and error handling
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_nat: reject unsupported target families
xt_nat SNAT and DNAT target handlers assume IP-family conntrack state
is present and can dereference a NULL pointer when instantiated from an
unsupported family through nft_compat. A bridge-family compat rule can
therefore trigger a NULL-dereference in nf_nat_setup_info().
Reject non-IP families in xt_nat_checkentry() so unsupported targets
cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT
compat users and leave the runtime fast path unchanged.
[ The crash was fixed via
9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"),
so this patch is no longer critical.
Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra
family check is a good idea in any case. ] |
| In Stomper 5e2741e when a client sends a SEND frame missing the destination header field, the server triggers a null pointer dereference (or access to invalid memory) while processing the frame, causing the process to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability
dwc_pcie_rasdes_debugfs_init() returns success when the controller has no
RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common
debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which
dereferences rasdes_info unconditionally.
Return early when no RAS DES state was allocated. In that case no RAS DES
mutex was initialized, so there is nothing to destroy.
[mani: reworded subject] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Fix potential NULL pointer dereference
dasd_release_space() checks the implementation of the is_ese()
discipline function before calling it to determine if a given device is
an ESE DASD.
The current usage of the logical AND operator will lead to a NULL
pointer dereference as the function is called even if the function
pointer is NULL.
Fix this by using the logical OR operator. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use proper context for logging
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
(cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain
tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.
Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value. |
