| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: reset per-IO canceled flag on each fetch
If a ublk server starts recovering devices but dies before issuing fetch
commands for all IOs, cancellation of the fetch commands that were
successfully issued may never complete. This is because the per-IO
canceled flag can remain set even after the fetch for that IO has been
submitted - the per-IO canceled flags for all IOs in a queue are reset
together only once all IOs for that queue have been fetched. So if a
nonempty proper subset of the IOs for a queue are fetched when the ublk
server dies, the IOs in that subset will never successfully be canceled,
as their canceled flags remain set, and this prevents ublk_cancel_cmd
from actually calling io_uring_cmd_done on the commands, despite the
fact that they are outstanding.
Fix this by resetting the per-IO cancel flags immediately when each IO
is fetched instead of waiting for all IOs for the queue (which may never
happen). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix DMA address corruption due to find_vma misuse
fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.
Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex(). |
| In the Linux kernel, the following vulnerability has been resolved:
futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock
When FUTEX_CMP_REQUEUE_PI requeues a non-top waiter that already owns the
target PI futex, task_blocks_on_rt_mutex() returns -EDEADLK before setting
waiter->task.
The subsequent remove_waiter() in rt_mutex_start_proxy_lock() dereferences
the NULL waiter->task, causing a kernel crash.
Add a self-deadlock check for non-top waiters before calling
rt_mutex_start_proxy_lock(), analogous to the top-waiter check in
futex_lock_pi_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: use correct flags for device private PMD entry
Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") updated set_pmd_migration_entry() to use
pmdp_huge_get_and_clear() in the softleaf case, but made no further
adjustments to the function itself.
Therefore this function continues to incorrectly use pmd_write(),
pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed
migration entry should be marked writable, softdirty or uffd-wp
respectively.
Whilst all are incorrect, the most problematic of these is pmd_write(), as
this can lead to corrupted rmap state.
On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling
pmd_write() on a softleaf will return the softdirty state encoded in the
entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled.
This was observed when running the hmm.hmm_device_private.anon_write_child
selftest:
1. The test faults in a range then migrates it such that a device-private
THP range is established.
2. The parent then migrates it to a device-private writable PMD entry whose
folio is entirely AnonExclusive with entire_mapcount=1, softdirty set
(accidentally correct write state).
3. The parent forks and the PMD entries are set to device-private read only
entries, entire_mapcount=2, softdirty still set.
4. [BUG] The child writes to the range then migrates to RAM - intending to
install non-writable migration entries - but replacing parent and child
PMD mappings with WRITABLE entries due to misinterpreting the softdirty
bit.
5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we
set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for
both parent and child, which are therefore AnonExclusive.
6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets
entire_mapcount=2 and we end up with an AnonExclusive folio with
entire_mapcount=2! Assert fires in __folio_add_anon_rmap():
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
folio_entire_mapcount(folio) > 1 &&
PageAnonExclusive(cur_page), folio)
This patch fixes the issue by correctly referencing the softleaf entry
fields for writable, softdirty and uffd-wp in set_pmd_migration_entry().
It also only updates A/D flags if the entry is present as these are
otherwise not meaningful for a softleaf entry.
This patch also flips the if (!present) { ... } else { ... } logic in
set_pmd_migration_entry() so it is easier to understand, and adds some
comments to make things clearer.
I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone
device private THP test infrastructure") which first exposes this bug as
it was the commit that permitted test_hmm to generate the test.
However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") is the commit that actually enabled this
behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix abuse of kprobe_write_ctx via freplace
uprobe programs are allowed to modify struct pt_regs.
Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.
For example,
SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}
SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}
freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.
Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.
To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
md: wake raid456 reshape waiters before suspend
During raid456 reshape, direct IO across the reshape position can sleep
in raid5_make_request() waiting for reshape progress while still
holding an active_io reference. If userspace then freezes reshape and
writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io
and waits for all in-flight IO to drain.
This can deadlock: the IO needs reshape progress to continue, but the
reshape thread is already frozen, so the active_io reference is never
dropped and suspend never completes.
raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do
the same for normal md suspend when reshape is already interrupted, so
waiting raid456 IO can abort, drop its reference, and let suspend
finish.
The mdadm test tests/25raid456-reshape-deadlock reproduces the hang. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: dw_mmc-rockchip: Add missing private data for very old controllers
The really old controllers (rk2928, rk3066, rk3188) do not support UHS
speeds at all, and thus never handled phase data.
For that reason it never had a parse_dt callback and no driver private
data at all.
Commit ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating
support") makes the private data sort of mandatory, because the init
function checks whether phases are configured internally or through the
clock controller.
This results in the old SoCs then experiencing NULL-pointer dereferences
when they try to access that private-data struct.
While we could have if (priv) conditionals in all places, it's way less
cluttery to just give the old types their private-data struct. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix global performance monitor reference counting
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
(cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF
macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but
macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1.
This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb
runs out of space, triggering a WARN_ON in rtnetlink and preventing the
interface from being dumped.
The bug can be reproduced with:
ip link add macvlan0 link eth0 type macvlan mode bridge
ip link set macvlan0 type macvlan bc_cutoff 0
ip -d link show macvlan0 # fails with -EMSGSIZE
The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add
netlink attribute for broadcast cutoff"), which added the nla_put_s32()
call in macvlan_fill_info() but missed adding the corresponding
nla_total_size(4) in macvlan_get_size(). A follow-up commit
55cef78c244d ("macvlan: add forgotten nla_policy for
IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still
did not fix the size calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL dereference of "old" filters before change()
Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched:
protect filter_chain list with filter_chain_lock mutex") TC filters are
added to a shared block and published to datapath before their ->change()
function is called. This is a problem for cls_fw: an invalid filter
created with the "old" method can still classify some packets before it
is destroyed by the validation logic added by Xiang.
Therefore, insisting with repeated runs of the following script:
# ip link add dev crash0 type dummy
# ip link set dev crash0 up
# mausezahn crash0 -c 100000 -P 10 \
> -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q &
# sleep 1
# tc qdisc add dev crash0 egress_block 1 clsact
# tc filter add block 1 protocol ip prio 1 matchall \
> action skbedit mark 65536 continue
# tc filter add block 1 protocol ip prio 2 fw
# ip link del dev crash0
can still make fw_classify() hit the WARN_ON() in [2]:
WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399
Modules linked in: cls_fw(E) act_skbedit(E)
CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014
RIP: 0010:fw_classify+0x244/0x250 [cls_fw]
Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202
RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004
RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40
RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0
R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000
R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000
FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0
Call Trace:
<TASK>
tcf_classify+0x17d/0x5c0
tc_run+0x9d/0x150
__dev_queue_xmit+0x2ab/0x14d0
ip_finish_output2+0x340/0x8f0
ip_output+0xa4/0x250
raw_sendmsg+0x147d/0x14b0
__sys_sendto+0x1cc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x126/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fca40e822ba
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba
RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003
RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e
R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000
</TASK>
irq event stamp: 1045778
hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60
softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260
softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0
Then, because of the value in the packet's mark, dereference on 'q->handle'
with NULL 'q' occurs:
BUG: kernel NULL pointer dereference, address: 0000000000000038
[...]
RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw]
[...]
Skip "old-style" classification on shared blocks, so that the NULL
dereference is fixed and WARN_ON() is not hit anymore in the short
lifetime of invalid cls_fw "old-style" filters.
[1] https://sashiko.dev/#/patchset/2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs/mbcache: cancel shrink work before destroying the cache
mb_cache_destroy() calls shrinker_free() and then frees all cache
entries and the cache itself, but it does not cancel the pending
c_shrink_work work item first.
If mb_cache_entry_create() schedules c_shrink_work via schedule_work()
and the work item is still pending or running when mb_cache_destroy()
runs, mb_cache_shrink_worker() will access the cache after its memory
has been freed, causing a use-after-free.
This is only reachable by a privileged user (root or CAP_SYS_ADMIN)
who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem.
Cancel the work item with cancel_work_sync() before calling
shrinker_free(), ensuring the worker has finished and will not be
rescheduled before the cache is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ap: use generic driver_override infrastructure
When the AP masks are updated via apmask_store() or aqmask_store(),
ap_bus_revise_bindings() is called after ap_attr_mutex has been
released.
This calls __ap_revise_reserved(), which accesses the driver_override
field without holding any lock, racing against a concurrent
driver_override_store() that may free the old string, resulting in a
potential UAF.
Fix this by using the driver-core driver_override infrastructure, which
protects all accesses with an internal spinlock.
Note that unlike most other buses, the AP bus does not check
driver_override in its match() callback; the override is checked in
ap_device_probe() and __ap_revise_reserved() instead.
Also note that we do not enable the driver_override feature of struct
bus_type, as AP - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Additionally, AP has a custom counter that is modified in the
corresponding custom driver_override_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL vif dereference in mt7925_mac_write_txwi
Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to
avoid a potential kernel panic in scenarios where `vif` might not be
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_dualpi2: drain both C-queue and L-queue in dualpi2_change()
Fix dualpi2_change() to correctly enforce updated limit and memlimit
values after a configuration change of the dualpi2 qdisc.
Before this patch, dualpi2_change() always attempted to dequeue packets
via the root qdisc (C-queue) when reducing backlog or memory usage, and
unconditionally assumed that a valid skb will be returned. When traffic
classification results in packets being queued in the L-queue while the
C-queue is empty, this leads to a NULL skb dereference during limit or
memlimit enforcement.
This is fixed by first dequeuing from the C-queue path if it is
non-empty. Once the C-queue is empty, packets are dequeued directly from
the L-queue. Return values from qdisc_dequeue_internal() are checked for
both queues. When dequeuing from the L-queue, the parent qdisc qlen and
backlog counters are updated explicitly to keep overall qdisc statistics
consistent. |
