| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-sof: Bound DAI link iteration
create_sdw_dailinks() walks sof_dais until it finds an entry with
initialised cleared, but sof_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bound S1G TIM PVB walk to the TIM element
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len. |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix integer overflow in radeon_align_pitch()
radeon_align_pitch() has the same kind of overflow issue as the old
amdgpu helper: both the alignment round-up add and the final
'aligned * cpp' calculation can overflow signed int.
If that wraps, radeon_mode_dumb_create() can end up returning an
invalid pitch or creating a zero-sized dumb buffer.
Fix this by using check_add_overflow() for the alignment round-up and
check_mul_overflow() for the final pitch calculation, returning 0 on
overflow. Also reject zero pitch and size in
radeon_mode_dumb_create().
Found via AST-based call-graph analysis using sqry. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Adjust size for copy_to_user()
The amount of data returned to user space should be limited by the buffer
size provided by the application. If the buffer is smaller than the data
size, return only the portion that fits instead of failing. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: add bounds check for USB channel index
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: bound DMA command body size against suffix pointer
vmw_cmd_dma() locates the DMA suffix at
(unsigned long) &cmd->body + header->size - sizeof(*suffix)
without checking that header->size is large enough to contain both
cmd->body and the suffix. An undersized header makes the suffix
pointer underflow back into the previous command in the bounce
buffer. The verifier later writes suffix->maximumOffset, clobbering
verified fields of an already-relocated earlier command -- a TOCTOU
on the device-visible command stream that lets one command rewrite
another's GMR id, surface id, or other authenticated fields.
Reject the command if the body is too small for the suffix to fit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO. |
| In the Linux kernel, the following vulnerability has been resolved:
igbvf: Fix leak in TX DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
When a USB audio endpoint requests full packet transfers via the fill_max
descriptor flag, data_ep_set_params() promotes ep->curpacksize to
ep->maxpacksize. However, maxsize is left at the original sample-rate
derived value.
Since u->buffer_size is allocated as maxsize * packets, the resulting
DMA buffer is far too small for the requested transfer length. When the
USB host controller streams up to curpacksize bytes per packet, it writes
past the end of the buffer via DMA, corrupting kernel heap memory.
Update maxsize to curpacksize when fill_max is set so that the allocated
DMA buffer size matches the actual transfer request size.
[ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use pskb_network_may_pull() in route_shortcircuit()
route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr))
(or ipv6hdr), which checks if bytes are available starting from skb->data.
However, in vxlan_xmit(), skb->data points to the MAC header, so
skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20)
only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of
IP header), leaving the rest of the IP header potentially un-pulled in non-linear
frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled
linear buffer length.
Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to
the length check to ensure the full network header is present in the linear buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775-core) Fix number of temperature registers for NCT6116
Unlike NCT6106, NCT6116 only has three temperature registers, and with
it only three temperature source and temperature source configuration
registers. The register addresses match those of NCT6106 and can be
re-used.
The code used a separate array to list the temperature source registers
for NCT6116, but used the size of the NCT6106 register array to set
the number of registers. The NCT6106 register array provides six addresses,
while the temperature source register array for NCT6116 only provides three
addresses. This causes a KASAN report.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775]
Read of size 2 at addr ffffffffc19561a6 by task modprobe/954
...
Call Trace:
dump_stack+0x7d/0xa7
print_address_description.constprop.0+0x1c/0x220
? __kasan_kmalloc.constprop.0+0xc9/0xd0
? __kmalloc_node_track_caller+0x194/0x5b0
? nct6775_probe+0x936/0x46f0 [nct6775]
? nct6775_probe+0x936/0x46f0 [nct6775]
...
Fix the problem by hard-coding the number of temperature and temperature
configuration registers to three for NCT6116. Drop the unnecessary
NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the
free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is
wrong: dp_peer->peer_id for an MLO peer always carries the
ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with
index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS
(256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The
intended bitmap entry also never gets cleared, so subsequent
ath12k_peer_ml_alloc() calls eventually run out of IDs.
The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and
is stored in ahsta->ml_peer_id. Use that instead.
While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so
the bitmap and ahsta->ml_peer_id stay in sync.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
sip_help_tcp() stores the size change of each NAT-rewritten SIP message
in s16 diff and accumulates it in s16 tdiff, but a single message can
grow by more than S16_MAX while the packet stays under the 65535
enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long
Contact list expands the message by tens of kilobytes. diff then wraps,
and "datalen = datalen + diff - msglen" yields a huge unsigned datalen,
so the next iteration's ct_sip_get_header() reads past the linearized skb
tail.
Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the
65535 byte packet limit, and the seqadj core is already s32
(nf_ct_seqadj_set() takes s32), so no previously accepted input is
rejected.
BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25
ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694)
nf_confirm (net/netfilter/nf_conntrack_proto.c:183)
nf_hook_slow (net/netfilter/core.c:619)
ip6_output (net/ipv6/ip6_output.c:246)
ip6_forward (net/ipv6/ip6_output.c:690)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6212)
process_backlog (net/core/dev.c:6676)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
... |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
remove_pud_mapping() and remove_p4d_mapping() obtain a child table base
with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for
addr.
RISC-V folds page-table levels at runtime. When a level is folded, its
offset helper returns the parent entry itself, but the index can still be
nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39
folds both P4D and PUD, so memory hot-remove can descend into unrelated
memory and pass an invalid page to __free_pages(). This can trigger:
kernel BUG at include/linux/mm.h:1810!
VM_BUG_ON_PAGE(page_ref_count(page) == 0)
arch_remove_memory+0x1e/0x5c
try_remove_memory+0x15e/0x200
remove_memory+0x24/0x3c
Only add the index when the corresponding page-table level is enabled,
matching p4d_offset() and pud_offset(). |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: reject a flag character as the field delimiter
The registration string starts with a user chosen delimiter that
separates the individual fields. So that the field parsers terminate
even on a truncated string create_entry() pads the buffer with that
same delimiter:
memset(buf + count, del, 8);
Most fields are scanned for the delimiter with strchr()/scanarg() and
happily stop on the padding. The flags field is different: instead of
scanning for the delimiter check_special_flags() consumes the flag
characters 'P', 'O', 'C' and 'F' and stops at the first byte that is
none of them, relying on the trailing delimiter to end the scan.
If the delimiter is itself a flag character the padding no longer acts
as a terminator. The scan swallows all eight padding bytes and keeps
reading past the end of the allocation until it hits a byte that is
not a flag character. For example registering
PaPEPPxPPiP
with 'P' as the delimiter (name "a", type extension, magic "x",
interpreter "i", empty flags) leaves the flag scan running off the end
of the buffer. The registration is rejected in the end because the
parser does not stop exactly at buf + count, but only after the out of
bounds read has already happened. With an unlucky allocation layout the
scan can walk into an unmapped page; under KASAN it is reported as a
slab out of bounds read. binfmt_misc mounts are available to
unprivileged users in a user namespace so the read is reachable without
privileges.
Reject a delimiter that is one of the flag characters up front. Such a
registration was always rejected anyway, only after the out of bounds
read, so no valid registration string changes meaning. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
snd_usb_handle_sync_urb() scales received sync packet sizes by the sender's
stride and stores the result directly in out_packet->packet_size[i]. If a
connected USB device sends an oversized sync packet, this frame count can
exceed ep->maxframesize.
The un-clamped frame count then propagates to the playback endpoint queue,
potentially driving packet transfers beyond the endpoint's hardware frame
limits.
Cap the calculated frame count against ep->maxframesize in
snd_usb_handle_sync_urb() to prevent oversized packets from entering the
playback queue. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775-core) Prevent access to unsupported weight registers
Sashiko reports:
During initialization of the nct6116 chip, the driver sets data->pwm_num
to 5. However, it assigns several NCT6106 register arrays (such as
NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and
NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP.
These arrays only contain 3 elements.
In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If
data->has_pwm has bits 3 or 4 set (which is structurally possible for
nct6116), the loop attempts to read elements at index 3 and 4 from these
3-element arrays. This results in a global out-of-bounds read, which can
be caught by KASAN.
Furthermore, the driver uses these garbage out-of-bounds values as
hardware register addresses for subsequent read and write operations. This
leads to invalid hardware register access, potentially causing hardware
misconfiguration or system crashes.
The underlying problem is that the chip does support up to five fan
control channels, but only the first three support weight control.
Fix the problem by extending the affected weight register arrays with
zeroed fields. The driver uses zeroed register addresses to determine
if a register is supported or not, and skips accesses for unsupported
registers. |
