Export limit exceeded: 380574 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (216 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-12235 | 1 Zephyrproject | 1 Zephyr | 2026-08-12 | 6.3 Medium |
| The Linkable Loadable Extensions (llext) subsystem mis-handles PLT/RELA relocation entries when linking a relocatable (partially-linked) ELF extension. In llext_link_plt() (subsys/llext/llext_link.c), the relocatable branch (tgt != NULL, the path used for Xtensa relocatable objects) computed the patch address as ext->mem[LLEXT_MEM_TEXT] - text.sh_offset + rela.r_offset + tgt->sh_offset and then performed the relocation write there without validating rela.r_offset. Its sibling shared/dynamic branch already rejected out-of-range offsets via llext_file_offset(). rela.r_offset is read directly from the ELF's RELA table, so a crafted entry with an offset larger than the target section makes the write land arbitrarily far outside the extension's text buffer. The result is an attacker-influenced out-of-bounds write (the location via r_offset, the written value being the resolved symbol address) performed in supervisor context at link time, before any extension code runs. The path is reached from llext_load() whenever an application loads an attacker-influenced ELF extension on Xtensa with writable storage; llext is documented to accept extensions of untrusted origin. Impact is supervisor-context memory corruption (integrity and availability loss, and a sandbox-boundary escape for user-mode extensions). Exploitation is gated by the Xtensa relocatable PLT path and writable storage, and turning the out-of-range write into a useful primitive is non-trivial. The fix adds a bound check rejecting any RELA entry whose r_offset >= tgt->sh_size, mirroring the existing validation in the shared branch. | ||||
| CVE-2026-10681 | 1 Zephyrproject | 1 Zephyr | 2026-08-12 | 6.5 Medium |
| In Zephyr's userspace dynamic-objects subsystem, thread_idx_alloc() in kernel/userspace/userspace.c allocated a new thread permission index from the global _thread_idx_map[] bitmap without holding lists_lock. On SMP systems, two user-mode threads invoking the k_object_alloc(K_OBJ_THREAD) syscall concurrently can both observe the same low free bit, perform the same non-atomic RMW to clear it, and return the identical tidx. The two newly created K_OBJ_THREAD objects are then assigned the same thread_id, so the two user threads alias a single bit position in every kernel object's perms[] bitfield: any subsequent grant of access on a kernel object to one thread is implicitly a grant to the other, defeating userspace ACL isolation. A secondary lost-update window between the unlocked &=~BIT() in alloc and the locked |= BIT() in thread_idx_free() can also leak entries from the thread-index pool. The defect is reachable from any user-mode thread via the unrestricted __syscall k_object_alloc and is gated on CONFIG_USERSPACE, CONFIG_DYNAMIC_OBJECTS, and CONFIG_SMP. The flaw was introduced when the per-thread permission index was added in 2018 and is present in every release up to and including v4.4.0. Fixed by holding lists_lock across the bitmap RMW and the permissions clear (and inlining the obj_list traversal that previously took the lock itself). | ||||
| CVE-2026-10682 | 1 Zephyrproject | 1 Zephyr | 2026-08-12 | 6.6 Medium |
| The userspace verifier z_vrfy_log_filter_set() for the log_filter_set syscall in subsys/logging/log_mgmt.c performed a signed comparison against the int16_t src_id parameter: src_id < (int16_t)log_src_cnt_get(domain_id). Any negative value for src_id (e.g. -1) trivially satisfied this check and was forwarded into z_impl_log_filter_set, where it propagated to filter_set() and ultimately to get_dynamic_filter(), which uses source_id as an unsigned index into the linker-section array &TYPE_SECTION_START(log_dynamic)[source_id].filters. After implicit conversion through uint32_t, an int16_t -1 becomes 0xFFFFFFFF, indexing log_dynamic far out of bounds and causing the kernel to perform an OOB read and an OOB read-modify-write (LOG_FILTER_SLOT_GET/SET) against memory adjacent to the log_dynamic section. The written value is a constrained 3-bit log level slot within the targeted 32-bit word, but the target address is attacker-chosen (a small negative offset from log_dynamic) and the write occurs in supervisor mode following a syscall from an unprivileged user thread, providing a kernel memory-corruption / privilege-escalation primitive. The defect is reachable on any build with CONFIG_USERSPACE=y and CONFIG_LOG_RUNTIME_FILTERING=y. Present from Zephyr v3.3.0 through v4.4.1. The fix replaces the signed bound check with an unsigned comparison: (uint32_t)src_id < log_src_cnt_get(domain_id), which correctly rejects negative inputs. | ||||
| CVE-2026-10683 | 1 Zephyrproject | 1 Zephyr | 2026-08-12 | 2.4 Low |
| In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code. As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target. An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral. The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked. | ||||
| CVE-2026-11985 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 3.6 Low |
| On the Zephyr ARM port, enabling the hardware FPU (CONFIG_FPU) forces the "Floating point ABI" choice, which defaults to CONFIG_FP_HARDABI. Both FP_HARDABI and FP_SOFTABI permit the compiler to emit hardware FP instructions in any function, even code that never uses floating-point types. However, the callee-saved FP registers (s16-s31 / d8-d15) are only saved and restored across a context switch when CONFIG_FPU_SHARING is enabled (arch/arm/core/cortex_m/swap_helper.S and arch/arm/core/cortex_a_r/swap_helper.S), and prior to this fix selecting an ABI did not enable FPU register sharing, which defaults off. In a build that enables the FPU with the default ABI but leaves CONFIG_FPU_SHARING disabled, the kernel preserves no callee-saved FP register state across thread switches. The documented precondition for this "unshared" mode — that only a single thread ever executes FP instructions — is silently violated because the compiler may generate FP instructions in every thread. Under CONFIG_USERSPACE, where threads are mutually isolated, this becomes an information-disclosure boundary crossing: a victim thread can leave secret-derived values in s16-s31, and a co-resident unprivileged thread can read those registers directly (FP register access is not privilege-gated), recovering data left behind by another thread. Without userspace the same defect causes cross-thread FP state corruption (a correctness fault). The leak is bounded to the 16 callee-saved single-precision registers and is opportunistic, so impact is low. The fix makes FP_HARDABI and FP_SOFTABI select CONFIG_FPU_SHARING and tags every thread with K_FP_REGS at creation, so callee-saved FP state is always preserved across context switches whenever the compiler may emit FP instructions. | ||||
| CVE-2026-12052 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 5.2 Medium |
| The USB device-side CDC NCM class control-to-host handler usbd_cdc_ncm_cth in subsys/usb/device_next/class/usbd_cdc_ncm.c builds a fixed-size response for the GET_NTB_PARAMETERS (28-byte struct ntb_parameters) and GET_NTB_INPUT_SIZE (8-byte struct ntb_input_size) class requests and copies the whole structure into the control DATA IN buffer with net_buf_add_mem(buf, ..., sizeof(...)), ignoring the host-supplied wLength. The control DATA IN buffer is allocated by the USB stack with a capacity of exactly wLength bytes (usbd_ep_ctrl_data_in_alloc -> udc_ctrl_data_alloc -> net_buf_alloc_len(&udc_ep_pool, wLength); no round-up is applied for the IN endpoint). Because net_buf_add_mem/net_buf_simple_add only bounds the copy with an __ASSERT_NO_MSG, which is compiled out in production builds, a host that issues one of these standard CDC NCM control requests with a wLength smaller than the response structure (e.g. wLength = 1) causes the handler to memcpy up to 27 bytes past the end of the allocated pool buffer. The request fields come straight from the USB SETUP packet, so any host (or USB interposer) the Zephyr device enumerates against can trigger the overflow with no authentication once an image built with the device_next USB stack and the CDC NCM class is connected. The out-of-bounds write corrupts adjacent allocations and metadata in the shared udc_ep_pool, primarily causing memory corruption and denial of service of the USB stack; the overflow length is bounded (<= 27 bytes) and the written content is fixed device constants, and the bug reads nothing back so there is no information disclosure. The fix clamps the copy with MIN(sizeof(...), setup->wLength), matching the existing CDC ACM handler. | ||||
| CVE-2026-11894 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 5.9 Medium |
| The Realtek BEE Bluetooth HCI driver's send callback, bt_hci_bee_send() in drivers/bluetooth/hci/hci_bee.c, violated the bt_hci_driver_api buffer-ownership contract. That contract requires the driver to consume (unref) the transmit net_buf only on success; on an error return the host caller retains ownership and unrefs the buffer itself. The pre-fix code routed all error paths through a shared cleanup label that unconditionally called net_buf_unref(buf) before returning the error code. Because the host TX paths (in subsys/bluetooth/host/hci_core.c) unref the buffer again after send() returns an error, the buffer is freed twice: the driver returns it to its net_buf pool and the host then unrefs the already-freed buffer, corrupting the shared pool / underflowing the reference count (CWE-415). The same error branch additionally dereferenced buf->len inside a LOG_ERR call after the buffer had already been unref'd, a read of freed memory (CWE-416) that is compiled in at the default error log level. The failing edges are reached when the controller's host-to-controller buffer allocation fails or the controller send fails (resource-exhaustion / IO conditions). A remote Bluetooth peer can push the device toward these conditions indirectly by driving heavy host transmit activity, at which point the double-free corrupts the host net_buf pool and most likely crashes the device, with residual potential for further memory corruption. The impact is confined to builds using this specific Realtek BEE HCI driver. The fix returns early from each error path without unreffing and unrefs the buffer only on the success path, restoring the ownership contract and eliminating both the double-free and the use-after-free read. | ||||
| CVE-2026-11893 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 5.9 Medium |
| The Bluetooth HCI driver for Bouffalo Lab on-chip BLE controllers (BL60x/BL70x/BL61x), bt_bflb_send() in drivers/bluetooth/hci/hci_bflb.c, violates the bt_hci_driver_api.send() buffer-ownership contract. That contract (documented at include/zephyr/drivers/bluetooth.h) requires the buffer reference to be consumed only on success; on error the caller still owns the reference and unrefs it. The driver instead routed all error paths through a shared label that unconditionally called net_buf_unref(buf) before returning the error code, consuming the buffer on failure as well. When send() returns an error, the host TX path (send_buf() in subsys/bluetooth/host/conn.c) unrefs the same buffer again, believing it still owns it. This double-unref over-decrements the net_buf reference count. Because the buffer is a TX fragment whose destroy callback also decrements its still-queued parent buffer, the parent is freed prematurely while reachable on the connection TX queue, producing a use-after-free and corruption of the shared net_buf pool rather than a benign leak. The error conditions are on the host-to-controller transmit path (controller send failure, or an unsupported H:4 packet type), so they are not driven directly by attacker-supplied radio bytes; a remote/adjacent peer can influence them only indirectly, e.g. by inducing controller TX failures under heavy link load. The consequence when reached is BLE-stack denial of service (crash / pool corruption) with possible further memory corruption, bounded to devices using one of these Bouffalo Lab on-chip controllers. | ||||
| CVE-2026-11810 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 7.5 High |
| The UpdateHub firmware-update agent's probe handler (z_impl_updatehub_probe() in subsys/mgmt/updatehub/updatehub.c) parses the JSON metadata returned by the update server into a fixed two-level nested-array struct. After parsing it validates only the outer array length (objects_len != 2) and then dereferences objects[1].objects[0].objects.sha256sum via strlen() without checking that the inner object array of element [1] is non-empty. The metadata is attacker-influenceable network input: the agent fetches it over CoAP from the configured UpdateHub server during its routine OTA probe. A malicious or compromised update server (or, when DTLS is disabled, a network man-in-the-middle) can return a response whose second outer object array is empty. Because the parse target is zero-initialised, the corresponding objects[1].objects[0].objects.sha256sum pointer is NULL, and the subsequent strlen() dereferences address zero. The same defect exists in both the 'any boards' and 'some boards' metadata layouts. The resulting CPU fault is fatal under Zephyr's default error handling, halting or resetting the device, so the flaw is a remotely triggerable denial of service. Impact is limited to availability; it is a read from NULL with no out-of-bounds write, memory corruption, or information disclosure. The fix rejects metadata whose inner object array is empty before any dereference, on both layouts. | ||||
| CVE-2026-11809 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 3.7 Low |
| The UpdateHub OTA client in subsys/mgmt/updatehub/updatehub.c contains an out-of-bounds / uninitialized-memory read in z_impl_updatehub_probe(). The probe response from the UpdateHub server is copied into a heap buffer (metadata) that is correctly NUL-terminated, but a second buffer (metadata_copy) is allocated with k_malloc (unzeroed) and filled with memcpy(metadata_copy, metadata, strlen(metadata)), which omits the terminating NUL. Everything after the copied content remains uninitialized heap. When the first json_obj_parse() over the array descriptor fails, the code falls back to json_obj_parse(metadata_copy, strlen(metadata_copy), ...). The strlen() call scans past the copied bytes through uninitialized heap and, if no zero byte is found before the end of the allocation, reads beyond the buffer; the resulting over-long length is then parsed as JSON. The probe payload is fully controlled by the (malicious, compromised, or — without the optional CONFIG_UPDATEHUB_DTLS — on-path) UpdateHub server, which can craft a large payload that fails the first parse to drive this path. The consequence is a read of uninitialized heap, with a worst case of an out-of-bounds read past the metadata_copy allocation that can fault and crash the update thread/device, producing a network-triggerable denial of service. The over-read data is consumed only internally to evaluate the update and is not returned to the attacker, so there is no direct information disclosure and no out-of-bounds write. The fix zeroes metadata_copy with memset before the copy, guaranteeing NUL termination and bounding strlen() within the allocation. | ||||
| CVE-2026-12051 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 4.6 Medium |
| The USB DFU class implementation in Zephyr's new (experimental) device_next USB device stack contains a NULL pointer dereference in handle_download() (subsys/usb/device_next/class/usbd_dfu.c). The handler computes MIN(setup->wLength, buf->len) and passes buf->data to the image write callback without checking that the buf net_buf pointer is non-NULL. The handler is reached over the USB control endpoint, driven by the USB host. For a DFU_DNLOAD (download) request with no Data OUT stage — notably the zero-length terminating download that the DFU protocol uses to end a firmware transfer — the USB core invokes the class handler with a NULL buffer. After the device has been advanced to the DFU_DNLOAD_IDLE state (by sending one valid download block and a GET_STATUS), a zero-length DFU_DNLOAD reaches handle_download() with buf == NULL, dereferencing it. The result is a NULL+offset read that triggers a fatal CPU fault, i.e. a denial of service (device crash/reset). The attacker is whatever controls the USB host the device is attached to; DFU download support must be enabled with a registered image. There is no memory corruption or information disclosure — impact is limited to availability. The fix adds an explicit if (buf != NULL) guard so the callback receives a zero-length, NULL-data transfer instead of crashing. | ||||
| CVE-2026-11742 | 1 Zephyrproject | 1 Zephyr | 2026-08-10 | 3.6 Low |
| The kernel queue helper z_queue_node_peek() in kernel/queue.c dereferences a node taken from a queue's data_q list, reading the node's flag byte and, for items enqueued via k_queue_alloc_append/alloc_prepend, the data pointer of an internally allocated alloc_node struct. The implementations of z_impl_k_queue_peek_head() and z_impl_k_queue_peek_tail() performed this read-and-dereference without holding the queue's spinlock, while every other accessor of the same list — including k_queue_get(), which unlinks a node and k_free()s its backing alloc_node — operates under that lock. Because peek was unsynchronized, a concurrent k_queue_get() on the same queue (on an SMP build, or under preemption/ISR concurrency) can free the node between the moment peek obtains the node pointer and the moment it dereferences it. The peek then reads flag bits and a data pointer out of freed, potentially re-allocated heap memory and returns a stale or dangling pointer to its caller. k_fifo and k_lifo are thin wrappers over k_queue, so this affects buffer queues used throughout the net_buf, Bluetooth, USB, and networking subsystems; the peek operations are also system calls reachable from CONFIG_USERSPACE threads. The consequences are a use-after-free read that can leak stale heap contents (one pointer word) and, when the returned dangling pointer is subsequently consumed as a live buffer, a dereference that can crash the system or corrupt memory. Exploitation requires winning a small race window with local access (e.g. a userspace process racing k_queue_peek_* against k_queue_get on a shared queue, or two CPUs), so practical impact is bounded and of low severity. The fix wraps both peek implementations with k_spin_lock/k_spin_unlock on the queue lock, making the read-and-dereference atomic with respect to the concurrent unlink-and-free and bringing peek into line with the rest of the queue's locking discipline. | ||||
| CVE-2026-11743 | 1 Zephyrproject | 1 Zephyr | 2026-08-10 | 6.6 Medium |
| The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not. In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access. The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread. The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition. | ||||
| CVE-2026-10653 | 1 Zephyrproject | 1 Zephyr | 2026-08-06 | 6.4 Medium |
| The Zephyr net_buf library (lib/net_buf/buf.c) manipulated both of its reference counts -- the per-header buf->ref and the per-data-block ref_count at the start of each variable/heap data allocation -- with plain non-atomic C operators (buf->ref++, if (--buf->ref > 0), if (--(*ref_count))). The API is documented as self-synchronizing: callers may share one buffer across threads (e.g. via k_fifo) and each holder independently calls net_buf_unref() with no surrounding lock. Under true concurrency (SMP, or single-core preemption between the non-atomic load and store while another context unrefs the same buffer), two holders can both observe the same prior reference value and both conclude they are the last reference. For heap/variable-data pools (mem_pool_data_unref/heap_data_unref, used by zbus message subscribers, the IP stack RX/TX buffers when CONFIG_NET_BUF_FIXED_DATA_SIZE=n, capture, wireguard, ISO-TP and usbip) this produces a double k_heap_free()/k_free() of the same block -- heap-metadata corruption and a use-after-free on the heap-hardening poison pattern. For the per-header refcount the buffer is returned to the pool free LIFO twice for any pool type (including fixed-data pools used by Bluetooth and networking), corrupting the free list so a later allocation hands the same buffer to two owners. The fix converts both refcounts to atomic_inc/atomic_dec (overlaying buf->ref in an atomic_t-sized union and changing the data-block refcount from uint8_t to atomic_t). Impact is gated on genuine concurrency and on an application architecture that shares one buffer among multiple independent unref'ers; the trigger is a refcount/timing race rather than packet content, so an external attacker has at most weak indirect influence over the race window. Affects all Zephyr releases through v4.4.0. This fix is not being backported to v3.7-branch (LTS). The backport was attempted and closed unmerged (#111181): the v3.7 networking tree has diverged from main, and the new atomic word-packing -- together with the assertions it adds -- turns pre-existing v3.7-only reference-counting defects elsewhere in the stack into hard faults, so landing the change faithfully would mean pulling an open-ended set of additional v3.7-only fixes into an LTS branch. v3.7 remains affected. Applications on v3.7 that share one net_buf across threads should serialize their own net_buf_unref() calls rather than rely on the documented self-synchronizing behaviour. The fix is on main and has been backported to v4.3-branch (#110852) and v4.4-branch (#110853). | ||||
| CVE-2026-7656 | 1 Zephyrproject | 1 Zephyr | 2026-08-06 | 8.1 High |
| The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was ((length/hop/source/target checks) && (icmp_hdr->code != 0)). Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated length is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet. | ||||
| CVE-2026-10849 | 1 Zephyrproject | 1 Zephyr | 2026-08-04 | 8.2 High |
| The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787). The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write. The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation. | ||||
| CVE-2026-11368 | 1 Zephyrproject | 1 Zephyr | 2026-08-04 | 7.1 High |
| The Bluetooth host ATT layer (subsys/bluetooth/host/att.c) associates each in-flight ATT TX buffer with its owning channel via the static tx_meta_data_storage[] array (data->att_chan = chan). When a buffer's last reference is dropped, its net-buf destroy callback defers the completion handling to the system workqueue (att_tx_destroy -> att_tx_destroy_work_handler -> att_on_sent_cb -> bt_att_sent), where bt_att_sent dereferences the channel and its ATT context (sys_slist_get(&att->reqs)). When a peer disconnects while an ATT PDU (a server notification/indication or any response) is still in flight in the controller TX path, L2CAP tears the channel down in l2cap_chan_del(): it runs the disconnected callback and then the released callback (bt_att_released), which frees the channel slab slot. Because the in-flight buffer is held by the connection TX path rather than the channel's own queue, its deferred destroy work can run after the channel has been freed. The att_on_sent_cb guard intended to drop the stale callback itself dereferences meta->att_chan, which is now a dangling pointer into a freed (and possibly reused) slab slot. A remote peer with an ATT connection can drive this by disconnecting during routine ATT traffic; no pairing or user interaction is required to reach the ATT bearer. The result is a use-after-free read/write of freed channel memory, reliably crashing the Bluetooth host (denial of service) and, because the channel slab slot may be reused, potentially corrupting live memory. The fix makes bt_att_released() NULL the att_chan field of every tx_meta_data_storage[] entry still referencing the channel before freeing it, so the deferred guard observes a NULL pointer and drops the callback. Teardown and the destroy work both run on the cooperative system workqueue, so the array update is serialized and needs no lock. | ||||
| CVE-2026-2411 | 1 Zephyrproject | 1 Zephyr | 2026-08-03 | 6.5 Medium |
| Zephyr's Bluetooth host declares a GATT characteristic as two consecutive attributes: a Characteristic Declaration whose permission is hard-coded to BT_GATT_PERM_READ, and a Characteristic Value attribute that carries the application-specified security permissions (e.g. BT_GATT_PERM_READ_ENCRYPT / READ_AUTHEN / READ_LESC). The public notify and indicate APIs explicitly accept either attribute, and passing the declaration is the documented, common idiom. Before sending each notification or indication, the host re-checks link security with bt_gatt_check_perm() against params->attr in gatt_notify(), gatt_indicate(), and gatt_notify_multiple_verify_params() (subsys/bluetooth/host/gatt.c). When the application passed the Characteristic Declaration attribute, the host correctly redirected the value handle but left params->attr pointing at the declaration, so the security check evaluated the declaration's permissions (no security required) instead of the value's. As a result the encryption/authentication/LESC requirement configured on the characteristic value was skipped. The Notify-Multiple path additionally used a mask that omitted the LE Secure Connections requirement. A remote peer triggers the disclosure by connecting (optionally without pairing or encryption) and writing the Client Characteristic Configuration descriptor to enable notifications or indications, causing the server to emit the protected value over a link that has not reached the required security level. The impact is information disclosure / access-control bypass for characteristic values the application intended to expose only over a secured link; exposure depends on the application declaring encrypt/authen-required notify/indicate characteristics and on the CCC being writable at a lower security tier. There is no memory-safety or availability impact. The fix adds bt_gatt_attr_resolve_value(), which maps a declaration attribute to the following value attribute before the permission check, and switches the Notify-Multiple path to the full BT_GATT_PERM_READ_ENCRYPT_MASK so the LESC requirement is also enforced. | ||||
| CVE-2026-10773 | 1 Zephyrproject | 1 Zephyr | 2026-08-03 | 5.4 Medium |
| The DHCPv4 client helper net_dhcpv4_msg_type_name() in subsys/net/lib/dhcpv4/dhcpv4.c indexes a static 8-element const char * name table after a faulty bounds check. The guard used msg_type <= sizeof(name) instead of msg_type <= ARRAY_SIZE(name); sizeof returns the byte size of the pointer array (32 on 32-bit, 64 on 64-bit targets) rather than the element count of 8, so message-type values from 9 up to that byte size pass the check and cause name[msg_type - 1] to read past the end of the array. The msg_type value originates from the DHCP MESSAGE TYPE option, which is read as an unchecked raw byte from a received packet (net_pkt_read_u8) and passed unmodified into the lookup. A DHCP server, or any host able to inject a spoofed DHCP reply onto the client's link, can therefore drive the index out of bounds. The out-of-range slot yields a garbage const char * that is then dereferenced by a %s log conversion. The lookup is reached only from a debug log statement (NET_DBG / LOG_DBG), so the out-of-bounds read is triggerable only when the DHCPv4 log module is built at DEBUG level (CONFIG_NET_DHCPV4_LOG_LEVEL_DBG), which is not the default configuration. When that condition holds, the result is an out-of-bounds read and a wild-pointer dereference: most likely a crash of the DHCP client (denial of service) and potentially disclosure of an adjacent pointer's contents through the log output. The fix replaces sizeof with ARRAY_SIZE, restoring the correct 1..8 acceptance window. | ||||
| CVE-2026-10774 | 1 Zephyrproject | 1 Zephyr | 2026-08-03 | 2.4 Low |
| Zephyr's Bluetooth Mesh subnet key management leaks one PSA Crypto key slot on every subnet-key teardown. In subsys/bluetooth/mesh/subnet.c, net_keys_create() imports the Private Beacon Key into a PSA key slot under CONFIG_BT_MESH_PRIV_BEACONS (enabled by default), but subnet_keys_destroy() guarded the matching psa_destroy_key() with CONFIG_BT_MESH_V1d1. That Kconfig symbol was removed when explicit Mesh 1.0.1 support was dropped, so the destroy branch became permanently dead code and the import is never balanced by a destroy. The imbalanced teardown is reached every time subnet keys are destroyed: deleting a subnet (Config Server NetKey Delete), completing a Key Refresh Procedure (which retires the old key set), and resetting/re-provisioning the node. The over-the-air triggers are processed only under the node's device key, so they are exercisable by the provisioner or network administrator that owns the node, reachable over the Bluetooth Mesh network. With the default CONFIG_MBEDTLS_PSA_KEY_SLOT_COUNT of 16, repeated add/delete or key-refresh cycles exhaust the shared PSA key-slot pool after roughly a dozen rounds. Once exhausted, bt_mesh_private_beacon_key() and thus subnet creation fail: the node can no longer add subnets or complete key refresh, and other PSA crypto consumers on the device may be starved, until the device is rebooted. The fix aligns the destroy guard with the import guard (CONFIG_BT_MESH_PRIV_BEACONS) so each slot is freed. | ||||