| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: validate write message length
ipmb_write() read message fields before validating the length byte.
A zero or short write can read uninitialized stack bytes.
A length smaller than the SMBus header underflows the block write length.
Require a non-empty buffer and the minimum IPMB request length.
Also require the length byte plus payload before parsing the message. |
| When a particular authentication mode is configured, the reverse proxy forwards requests for a bundled third-party administrative interface directly to that interface without applying the gateway's own authentication requirement first. All access control for this administrative interface, which manages the credential store used to gate every other service in the deployment, is delegated entirely to that third-party interface's own login mechanism. Any authentication weakness in that bundled interface would compromise the credential store protecting the rest of the deployment. |
| The application's role-authorization lookup defaults to granting access when a request handler's name is not present in its table of role requirements, rather than defaulting to deny. Any request handler that is not explicitly registered in this table is reachable by any authenticated user regardless of their assigned role, and any newly added handler is fail-open by default until explicitly added to the table. |
| Requests from the reverse proxy to the identity-provider service for token discovery, introspection, and credential exchange do not verify the identity provider's server certificate. An attacker positioned on the network path between the proxy and the identity provider could impersonate the identity provider and issue forged authentication tokens accepted by the deployment. |
| A file-upload handler redirects the authenticated client's browser to a URL taken directly from that same request's Referer header, without validating it against the application's own origin. This allows an authenticated attacker to craft a request that causes another user's browser to be redirected to an arbitrary external destination after completing an upload. |
| A deployment mode intended to expose only read access to a bundled packet-analysis component's interface denies a list of write-capable routes by pattern, but the pattern omits routes that modify tags attached to stored session records, and the proxy configuration otherwise permits the request method those routes use. This allows an authenticated user on a deployment intended to be read-only to add or remove tags on stored session records. |
| A prior update that raised a bundled HTTP client library to a version remediating known vulnerabilities was later reverted, reintroducing the earlier, vulnerable version into a log-processing component. The only code path in that component using the library issues a request to a single fixed, trusted vendor URL at initialization and does not process attacker-controlled input through the library, limiting practical exploitability of the reintroduced version in this context. |
| An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that regenerates credentials will expose that component's administrative interface to anyone aware of the default value. |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. |
| A weakness has been identified in lenve vhr 1.0-SNAPSHOT. This vulnerability affects the function FastDFSUtils.upload of the file /hr/userface of the component Avatar Upload. This manipulation of the argument File causes unrestricted upload. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| vLLM versions >=0.10.2 and <0.28.0 do not apply any audio decode-size or duration limit when extracting audio from video input for NanoNemotronVL models. In nano_nemotron_vl.py, _extract_audio_from_videos calls load_audio_pyav(BytesIO(video_bytes)) without the max_duration_s or max_decode_bytes parameters, so neither VLLM_MAX_AUDIO_DECODE_DURATION_S nor VLLM_MAX_AUDIO_DECODE_BYTES is enforced (unlike the direct audio upload path in AudioMediaIO). When a NanoNemotronVL model is served with use_audio_in_video=True, an attacker who supplies a small, highly compressed video as multimodal input can force the server to allocate gigabytes of memory during audio decoding, resulting in a denial of service. Fixed in vLLM 0.28.0. |
| An application programming interface endpoint accepts a user-supplied value and interpolates it directly into the path of a backend request to the underlying search and analytics data store, without restricting its contents. This allows an authenticated attacker to substitute an arbitrary backend path, causing the application's own elevated service credentials to be used against unintended internal endpoints. This could allow an attacker to enumerate or read internal configuration and administrative data from the backend data store that would otherwise be restricted. |
| A routing rule selects between two different authentication mechanisms for the same downstream service based on the value of a client-supplied request header, rather than on any property the client cannot control. An authenticated user in possession of a shared service credential can set this header to route around the primary role-based authorization check and reach the alternate path's fixed, elevated role instead. This allows a low-privileged authenticated attacker who knows the shared credential to perform actions reserved for a higher-privileged role. |
| An example environment-configuration file ships with a fixed, publicly-known secret value used to sign authentication cookies for a bundled packet-analysis component. A deployment that copies this example file into active configuration without running the setup routine that regenerates the value will use the known default, allowing an attacker aware of the default to forge valid authentication cookies for that component. |
| Concrete CMS 9 through 9.5.2 is vulnerable to Missing Authorization in the block alias route (Process::alias() in concrete/controllers/backend/block/process.php).It does not verify that the referenced block is genuinely orphaned on the target page, nor that the caller holds any permission over the source block. A user granted only an area-scoped add_block_to_area delegation on their own page can therefore pass any block ID on the site: the source block's content is duplicated into an area the rogue editor controls, disclosing that content, and the original block is then force-deleted in the same request, destroying arbitrary site content. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 5.9 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:N/VC:N/VI:H/VA:H/SC:N/SI:N/SA:N. Thanks Yonatan Drori from Tenzai for reporting. |
| A security flaw has been discovered in lenve vhr 1.0-SNAPSHOT. This affects the function HrInfoController.updatePass of the file /hr/pass of the component Password Update Handler. The manipulation of the argument hrid results in improper authorization. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has
successfully called request_irq, the error handling jumps directly to
out_pit_clocksource_unregister without freeing the registered IRQ.
This leaks the IRQ line and, since kfree(pit) follows, leaves a
dangling pointer registered as the interrupt handler's dev_id,
potentially leading to a use-after-free if the IRQ fires afterwards.
Fix it by calling pit_clockevent_per_cpu_exit to properly release the
IRQ before falling through to the existing cleanup chain. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix double end_creating() on the casefold-mismatch path
ovl_create_real() releases the new dentry twice when the casefold
consistency check fails. The S_IFDIR branch calls end_creating() and
sets err, then falls through to the common out: label which calls
end_creating() on the same dentry again:
case S_IFDIR:
newdentry = ovl_do_mkdir(ofs, dir, newdentry, attr->mode);
err = PTR_ERR_OR_ZERO(newdentry);
if (!err && ofs->casefold != ovl_dentry_casefolded(newdentry)) {
pr_warn_ratelimited(...);
end_creating(newdentry); /* first */
err = -EINVAL;
}
break;
...
if (err)
goto out;
...
out:
if (err) {
end_creating(newdentry); /* second, same dentry */
return ERR_PTR(err);
}
end_creating() is end_dirop(), which does inode_unlock() on the parent
and dput() on the dentry, so the parent directory's i_rwsem is unlocked
twice and the dentry is put twice. The second unlock releases a lock
that is not held, which is what wedges every later creation under that
parent, and the second dput() drops a reference that was never taken.
The branch was added by commit dfc7da402ccc ("ovl: Check for casefold
consistency when creating new dentries") as a bare dput(), which already
released the reference twice; commit fe497f0759e0 ("VFS: change
vfs_mkdir() to unlock on failure.") converted both sites to
end_creating(), adding the double unlock.
This is reachable by an unprivileged user. The casefold consistency of
the layers is validated at mount time in ovl_parse_layer(), and again on
every lookup in ovl_lookup_single(), but ofs->workdir is the internal
"work" subdirectory created inside the user-supplied workdir, and that
subdirectory is not re-checked. Marking it casefolded after the mount
therefore makes every ovl_create_temp() inherit the wrong state - and
that path reaches ovl_create_real() through ovl_start_creating_temp(),
which uses start_creating() with a generated name and so never runs the
lookup-time check.
unshare -Urm
mount -t tmpfs -o casefold=utf8-12.1.0 tmpfs mnt
mkdir -p mnt/lower/d mnt/upper mnt/work mnt/merged
mount -t overlay ovl -o lowerdir=mnt/lower,\
upperdir=mnt/upper,workdir=mnt/work mnt/merged
chattr +F mnt/work/work
mkdir mnt/merged/d/sub # directory copy-up
overlayfs: wrong inherited casefold (work/#5)
and the next copy-up blocks forever on the parent's i_rwsem:
mkdir D start_creating+0x65/0xb0
ovl_start_creating_temp+0xb0/0xe0 [overlay]
ovl_create_temp+0xa3/0x1d0 [overlay]
ovl_copy_up_one+0x1f1c/0x21c0 [overlay]
ovl_copy_up_flags+0xf5/0x140 [overlay]
ovl_create_object+0xb7/0x220 [overlay]
ovl_mkdir+0x23/0x40 [overlay]
Drop the end_creating() from the branch and let out: own the cleanup,
which is what every other error path in this function already does. |
