| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix SAP refcount leak in llc_ui_autobind()
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can consume
all dynamic SAP values and make later autobinds fail with -EUSERS.
Drop the caller's reference after a successful autobind, matching
llc_ui_bind()'s ownership model. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix matcher leak on resize target setup failure
hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: Initialize eth_syslock spinlock before use
lan743x_hardware_init() calls pci11x1x_strap_get_status() during the
PCI11x1x probe sequence. That helper acquires the Ethernet subsystem
hardware lock via lan743x_hs_syslock_acquire(), which relies on
adapter->eth_syslock_spinlock to serialize access.
The spinlock is currently initialized only after the strap status is
read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized
spinlock can trip the spinlock debug check.
Fix by initializing adapter->eth_syslock_spinlock before reading the
strap status so the probe path never attempts to lock an uninitialized
spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
When hardware page table walker (PTW) is enabled on LoongArch, the CPU
may set _PAGE_DIRTY directly in the page table entry during a write TLB
miss, without going through the software TLB store handler. The software
TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED
together:
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e.
_PAGE_MODIFIED is left unchanged. This creates a window where a PTE has
_PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED
clear (software is unaware).
When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls
pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and
_PAGE_DIRTY bits:
pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY);
Since _PAGE_MODIFIED was never set, the dirtiness information is lost
completely. Subsequently, when memory pressure triggers page reclaim,
page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty()
returns false) and the page may be freed without writeback, causing data
corruption.
Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in
both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits:
if (pte_val(pte) & _PAGE_DIRTY)
pte_val(pte) |= _PAGE_MODIFIED;
The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case,
where pmd entries need the same treatment.
This ensures the software dirty tracking bit (checked by pte_dirty() and
pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is
preserved across fork COW write-protection.
The issue was found by the LTP madvise09 test case, which exercises page
reclaim after "madvise(MADV_FREE), write and fork" operation sequence on
private anonymous mappings. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix header buffer corruption with header-split and HW-GRO
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_spi_transfer() is called from ca8210_spi_exchange(), the
interrupt handler ca8210_interrupt_handler(), and from the retry path
inside the completion callback itself. The exchange and interrupt
handler paths loop on -EBUSY, so under sustained SPI bus contention
every retry iteration leaks a fresh cas_ctl (~600 bytes per
occurrence).
Fix it by freeing cas_ctl on the spi_async() error path. While here,
correct the misleading error string: the function calls spi_async(),
not spi_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Free BPID bitmap on setup failure
nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses
a plain kcalloc(). If any of the following devm_kcalloc() allocations for
the BPID mapping arrays fails, the function returns without freeing the
bitmap. Free the BPID bitmap before returning from those error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: clean up XDP TX queues when regular TX setup fails
create_queues_with_size_backoff() creates XDP TX queues before setting
up the regular TX path. If the subsequent allocation or creation of
regular TX queues fails, the error handling paths omit the teardown of the
XDP TX queues, leading to a resource leak.
Fix this by explicitly destroying the XDP TX queue subset at the two
missing failure points.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have
an ENA device to test with, no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: destroy DMA pool on CLDMA late init failure
t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before
initializing the TX and RX rings. If any ring initialization
fails, the error path frees the already initialized rings but
leaves the DMA pool allocated.
Destroy md_ctrl->gpd_dmapool on the late-init failure path
to avoid leaking the DMA pool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: icssg: guard PA stat lookups
icssg_ndo_get_stats64() unconditionally calls emac_get_stat_by_name()
with FW PA stat names regardless of whether the PA stats block is
present on the hardware. emac_get_stat_by_name() already guards the
PA stats lookup with `if (emac->prueth->pa_stats)`; when that pointer
is NULL the lookup falls through to netdev_err() and returns -EINVAL.
Because ndo_get_stats64 is polled regularly by the networking stack
this produces thousands of log entries of the form:
icssg-prueth icssg1-eth end0: Invalid stats FW_RX_ERROR
A secondary consequence is that the int(-EINVAL) return value is
implicitly widened to a near-ULLONG_MAX unsigned value when accumulated
into the __u64 fields of rtnl_link_stats64, silently corrupting the
rx_errors, rx_dropped and tx_dropped counters reported by `ip -s link`.
Every other PA-aware code path in the driver is already guarded with
the same `if (emac->prueth->pa_stats)` check. Apply the same guard
here. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsiback_device_action() obtains a command tag in
scsiback_get_pend_req() and submits a task-management request with
target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and
scsiback jumps to the err: label, which sends a response but frees
nothing, leaking the tag.
Impact: a pvSCSI guest can leak the command tags of a LUN's session,
stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests
whenever target_submit_tmr() fails.
transport_generic_free_cmd() cannot be used here. By the time
target_submit_tmr() returns an error it has already run
__target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its
target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via
core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the
pointer dangling. Letting the command release run target_free_cmd_mem()
would then double-free se_tmr_req.
Use the same helper, which returns just the tag, on this path too. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-ioctl: fix a possible overflow in list_version_get_info
sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the
output buffer - info->vers->version[0], info->vers->version[1],
info->vers->version[2] and info->vers->next. This can cause buffer
overflow.
Fix this buffer overflow by replacing "sizeof(tt->version)" with
"sizeof(struct dm_target_versions)". |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on probe failure
The vub300 driver lifetime-manages its controller state using
vub300->kref, with vub300_delete() freeing the mmc host when the last
reference is dropped. The probe error path after the inactivity timer has
been armed still bypasses that lifetime rule, however, and falls through
to mmc_free_host() directly if mmc_add_host() fails.
The race window is between arming the inactivity timer and reaching the
probe error unwind after mmc_add_host() fails:
probe thread timer/workqueue
------------ ---------------
kref_init(&vub300->kref) ref = 1
kref_get(&vub300->kref) ref = 2, timer ref
add_timer(inactivity_timer) fires after one second
|
| race window
|<---------------------------------------------------->
|
mmc_add_host(mmc)
inactivity timer fires
vub300_queue_dead_work()
kref_get() ref = 3
queue_work(deadwork)
mmc_add_host() fails
timer_delete_sync()
mmc_free_host(mmc)
frees vub300
deadwork runs
use-after-free
The inactivity timeout is one second, so this would require
mmc_add_host() to both fail and take more than one second to do so. This
is unlikely to happen in practice, but the error path is still wrong.
timer_delete_sync() only waits for the timer callback itself. It does
not flush deadwork that the callback may already have queued. As a
result, queued deadwork can still hold a kref while the probe error path
directly frees the backing mmc host, including the vub300 storage.
Fix this by using the same lifetime mechanism as disconnect. Clear
vub300->interface so that the timer callback and any queued deadwork
return early and drop their references, then drop the initial probe
reference and return without falling through to err_free_host. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging
The debug logging in ims_pcu_irq() unconditionally prints data from
pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the
actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the
control URB exceeds pcu->max_in_size, this leads to an out-of-bounds
read.
Fix this by printing from the correct buffer associated with the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - validate control endpoint type
The driver currently assumes that the first endpoint of the control
interface is an interrupt IN endpoint without verifying it. A malicious
device could provide a different endpoint type, which would then be
passed to usb_fill_int_urb(), potentially leading to kernel warnings
or undefined behavior.
Verify that the control endpoint is an interrupt IN endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
blocking recovery.
Fix this by adding the missing kref_put() call and reset abort_in_progress
to false, matching the cleanup done in the efct_hw_wq_write() failure path
below. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: unregister blocking notifier on init failure
sparx5_register_notifier_blocks() registers the switchdev blocking
notifier before allocating the ordered workqueue. If the workqueue
allocation fails, the error path unregisters the switchdev and netdevice
notifiers, but leaves the blocking notifier registered.
Add a separate error label for the workqueue allocation failure path and
unregister the switchdev blocking notifier there. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/hw_engine: Fix double-free of managed BO in error path
The error path in hw_engine_init() explicitly frees a BO allocated
with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm().
Since the managed BO already has a devm cleanup action registered,
this causes a double-free when devm unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit e459a3bdeb117be496d7f229e2ea1f6c9fe4080b) |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work
Upon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports
and closes the CPU port conduits:
dsa_switch_for_each_cpu_port(dp, priv->ds)
dev_close(dp->conduit);
mxl862xx_remove() unregisters the switch before cancelling this work:
set_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags);
cancel_delayed_work_sync(&priv->stats_work);
dsa_unregister_switch(ds);
mxl862xx_host_shutdown(priv);
dsa_unregister_switch() frees the dsa_port objects. If a CRC error
schedules the work during teardown it can run after the ports have been
freed and dereference freed memory.
Guard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set
before dsa_unregister_switch(). DSA tears the ports down under
rtnl_lock(), so checking the flag under rtnl_lock() means the work either
runs before teardown and sees valid ports, or runs afterwards, observes
the flag and skips the walk. This mirrors the host_flood_work handler,
which skips torn-down ports under rtnl_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: qcom: clear opened when stream enable fails
On enable, subs->opened is set before the service_interval is validated;
an invalid interval jumps to the response label without clearing it, so
the substream is wedged at -EBUSY until a disable or disconnect.
Clear subs->opened on the enable error path. |
