| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired. |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to escalate privileges to superuser by directly manipulating the database, execute arbitrary system commands, and achieve full system compromise with Langflow service permissions. |
| AsyncSSH is a Python package which provides an asynchronous client and server implementation of the SSHv2 protocol on top of the Python asyncio framework. Prior to 2.23.0, AsyncSSH expands the OpenSSH-compatible AuthorizedKeysFile %u token in asyncssh/config.py, asyncssh/connection.py, asyncssh/auth_keys.py, and asyncssh/misc.py with the raw SSH username during pre-authentication server config reload, allowing a server configured with AuthorizedKeysFile authorized_keys/%u to read an authorized-keys file outside the intended directory when the SSH username contains /, \, or .. path traversal segments and authenticate with an attacker-selected key file. This issue is fixed in version 2.23.0. |
| IBM PowerVM Novalink are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. |
| Shopware is an open commerce platform. Prior to 6.6.10.18 and 6.7.10.1, the order state transition features /api/_action/order/{orderId}/state/{transition} and similar transaction and delivery transition routes in src/Core/Checkout/Order/Api/OrderActionController.php do not declare PlatformRequest::ATTRIBUTE_ACL or perform an explicit privilege check, so AclAnnotationValidator exits when route ACL metadata is absent and low-privileged users without order:update, order_transaction:update, or order_delivery:update can trigger StateMachineRegistry::transition() writes in SYSTEM_SCOPE. This issue is fixed in versions 6.6.10.18 and 6.7.10.1. |
| Keycloak provides a mechanism called Client Policies to enforce security requirements on clients, such as requiring them to use signed JWTs for authentication. A flaw was discovered where this enforcement can be bypassed. An attacker with valid client credentials can provide a fake, unsigned assertion header that tricks the system into thinking the policy requirements have been met. This allows the attacker to authenticate using simpler methods like a client secret even when the administrator has mandated more secure, signed assertions. |
| The LearnPress WordPress plugin before 4.4.1 does not escape a search parameter before reflecting it into an HTML attribute, leading to Reflected Cross-Site Scripting that executes in the browser of a logged-in instructor or administrator who is tricked into opening a crafted link. |
| Symfony UX is a JavaScript ecosystem for Symfony. From 2.2.0 until 2.36.0 and 3.1.0, the Stimulus controller in symfony/ux-autocomplete renders AJAX response items in _createAutocompleteWithRemoteData() by interpolating the text field into HTML template literals (<div>${item[labelField]}</div>) rather than text, allowing attacker-controlled markup from user-supplied dropdown values to execute in the browser of any user who opens an autocomplete widget backed by the same data. This issue is fixed in versions 2.36.0 and 3.1.0. |
| Symfony UX is a JavaScript ecosystem for Symfony. From 2.8.0 until 2.36.0 and 3.1.0, when a #[LiveProp] is typed as DateTimeInterface and no explicit format is configured, Symfony\UX\LiveComponent\LiveComponentHydrator::hydrateObjectValue() falls back to new $className($value), allowing client-supplied relative strings such as now, tomorrow, or +10 years to move a writable, format-less date prop past time-based business logic checks. This issue is fixed in versions 2.36.0 and 3.1.0. |
| A vulnerability was found in code-projects Hospital Bed Management System 1.0. This affects an unknown part of the component Login Form. Performing a manipulation of the argument Username results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. |
| The Fediverse Embeds WordPress plugin before 1.5.8 does not validate the destination of the server-side request performed by an unauthenticated media-proxying endpoint, allowing anonymous users to make the site fetch arbitrary URLs, including internal and private-network addresses, and read back the response body. This results in a full-read Server-Side Request Forgery and open proxy. |
| The Fediverse Embeds WordPress plugin before 1.5.8 does not validate the destination of the server-side request performed by an unauthenticated site-info endpoint before fetching it, allowing anonymous users (the gating nonce is exposed on public pages carrying an embed) to make the site request internal and private-network URLs and read back the parsed page metadata. This is a Server-Side Request Forgery. |
| Use of a cryptographically weak random number generator in the GenerateRandomPassword function in bosh-windows-stemcell-builder allows a remote attacker to brute-force the resulting SSH login via TCP/22.
Affected versions: bosh-windows-stemcell-builder versions prior to v2019.98. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). |
| The Kirki – Freeform Page Builder, Website Builder & Customizer plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 6.0.13 via the 'family' parameter. This makes it possible for authenticated attackers, with editor-level access and above, to delete arbitrary directories on the server, which can result in loss of data and availability. |
| The Bricksforge plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.1.8.6. This is due to improper validation of the fieldIds parameter in the Pro Forms registration action, which allows attacker-supplied field IDs to be added to the trusted form-field whitelist. This makes it possible for unauthenticated attackers to register a new administrator account by submitting a crafted request to a publicly accessible Bricksforge Pro Forms registration form. Successful exploitation requires that the site has a public Bricksforge Pro Forms element configured with the User Registration action. |
| Grav before 2.0.4 contains a regular expression denial of service (ReDoS) vulnerability in the regex_replace filter and function, which are allowlisted in the Twig content sandbox. When Twig processing in page content is enabled (security.twig_content.process_enabled: true, disabled by default), an authenticated page editor can supply a catastrophically backtracking PCRE pattern that is passed directly to PHP's preg_replace(), causing unbounded CPU consumption and denial of service to the web server process. |
| The Grav API plugin (getgrav/grav-plugin-api) before 1.0.6 contains an authorization bypass: API keys can be created with a restricted scopes array, but the ApiKeyAuthenticator class never reads or enforces these scopes. It loads and returns the owning user's full account object, so a key created with limited scopes (e.g. read-only) can perform any write, delete, or administrative operation the owning user is authorized for. Fixed in 1.0.6. |
| OpenClaw versions before 2026.5.18 contain an authorization bypass vulnerability in skill command dispatch that allows lower-trust callers to execute or persist actions beyond their intended authorization. Attackers can bypass tool policy restrictions through configured input paths to perform unauthorized actions when the affected feature is enabled and reachable. |
