| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| React Router is a router for React. In versions on the 7.0 branch prior to version 7.5.2, it's possible to modify pre-rendered data by adding a header to the request. This allows to completely spoof its contents and modify all the values of the data object passed to the HTML. This issue has been patched in version 7.5.2. |
| RISC Zero is a general computing platform based on zk-STARKs and the RISC-V microarchitecture. Due to a missing constraint in the rv32im circuit, any 3-register RISC-V instruction (including remu and divu) in risc0-zkvm 2.0.0, 2.0.1, and 2.0.2 are vulnerable to an attack by a malicious prover. The main idea for the attack is to confuse the RISC-V virtual machine into treating the value of the rs1 register as the same as the rs2 register due to a lack of constraints in the rv32im circuit. Rust applications using the risc0-zkvm crate at versions 2.0.0, 2.0.1, and 2.0.2 should upgrade to version 2.1.0. Smart contract applications using the official RISC Zero Verifier Router do not need to take any action: zkVM version 2.1 is active on all official routers, and version 2.0 has been disabled. Smart contract applications not using the verifier router should update their contracts to send verification calls to the 2.1 version of the verifier. |
| Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Prior to versions 0.25.3 and 0.26.3, by spoofing a webhook payload with a specific set of headers and body data, an attacker could transfer ownership of a repository and its repo level secrets to a separate repository. These secrets could be exfiltrated by follow up builds to the repository. Users with an enabled repository with access to repo level CI secrets in Vela are vulnerable to the exploit, and any user with access to the CI instance and the linked source control manager can perform the exploit. Versions 0.25.3 and 0.26.3 fix the issue. No known workarounds are available. |
| Invision Community through 4.7.16 allows remote code execution via the applications/core/modules/admin/editor/toolbar.php IPS\core\modules\admin\editor\_toolbar::addPlugin() method. This method handles uploaded ZIP files that are extracted into the applications/core/interface/ckeditor/ckeditor/plugins/ directory without properly verifying their content. This can be exploited by admin users (with the toolbar_manage permission) to write arbitrary PHP files into that directory, leading to execution of arbitrary PHP code in the context of the web server user. |
| Insufficient Verification of Data Authenticity vulnerability in GE Vernova UR IED family devices allows an authenticated user to install a modified firmware.
The firmware signature verification is enforced only on the client-side dedicated software Enervista UR Setup, allowing the integration check to be bypassed. |
| An attacker spoofing answers to ECS enabled requests sent out by the Recursor has a chance of success higher than non-ECS enabled queries.
The updated version include various mitigations against spoofing attempts of ECS enabled queries by chaining ECS enabled requests and enforcing stricter validation of the received answers.
The most strict mitigation done when the new setting outgoing.edns_subnet_harden (old style name edns-subnet-harden) is enabled. |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| A vulnerability has been identified within Rancher Manager whereby the SAML authentication from the Rancher CLI tool is vulnerable to phishing attacks. The custom authentication protocol for SAML-based providers can be abused to steal Rancher’s authentication tokens. |
| The RegistrationMagic – Custom Registration Forms, User Registration, Payment, and User Login plugin for WordPress is vulnerable to payment bypass due to insufficient verification of data authenticity on the 'process_paypal_sdk_payment' function in all versions up to, and including, 6.0.6.9. This is due to the plugin trusting client-supplied values for payment verification without validating that the payment actually went through PayPal. This makes it possible for unauthenticated attackers to bypass paid registration by manipulating payment status and activating their account without completing a real PayPal payment. |
| A vulnerability was determined in Belkin AX1800 1.1.00.016. Affected by this vulnerability is an unknown functionality of the component Firmware Update Handler. This manipulation causes insufficient verification of data authenticity. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
| dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 5.0.6, the fast-jwt library does not properly validate the iss claim based on the RFC 7519. The iss (issuer) claim validation within the fast-jwt library permits an array of strings as a valid iss value. This design flaw enables a potential attack where a malicious actor crafts a JWT with an iss claim structured as ['https://attacker-domain/', 'https://valid-iss']. Due to the permissive validation, the JWT will be deemed valid. Furthermore, if the application relies on external libraries like get-jwks that do not independently validate the iss claim, the attacker can leverage this vulnerability to forge a JWT that will be accepted by the victim application. Essentially, the attacker can insert their own domain into the iss array, alongside the legitimate issuer, and bypass the intended security checks. This issue is fixed in 5.0.6. |
| In OpenStack Neutron before 25.0.1, neutron/extensions/tagging.py can use an incorrect ID during policy enforcement. It does not apply the proper policy check for changing network tags. An unprivileged tenant is able to change (add and clear) tags on network objects that do not belong to the tenant, and this action is not subjected to the proper policy authorization check. This affects 23 before 23.2.1, 24 before 24.0.2, and 25 before 25.0.1. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Hickory DNS is a Rust based DNS client, server, and resolver. A vulnerability present starting in version 0.8.0 and prior to versions 0.24.3 and 0.25.0-alpha.5 impacts Hickory DNS users relying on DNSSEC verification in the client library, stub resolver, or recursive resolver. The DNSSEC validation routines treat entire RRsets of DNSKEY records as trusted once they have established trust in only one of the DNSKEYs. As a result, if a zone includes a DNSKEY with a public key that matches a configured trust anchor, all keys in that zone will be trusted to authenticate other records in the zone. There is a second variant of this vulnerability involving DS records, where an authenticated DS record covering one DNSKEY leads to trust in signatures made by an unrelated DNSKEY in the same zone. Versions 0.24.3 and 0.25.0-alpha.5 fix the issue. |
| CMSaaSStarter is a SaaS template/boilerplate built with SvelteKit, Tailwind, and Supabase. Any forks of the CMSaaSStarter template before commit 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 are impacted. The issue is the user JWT Token is not verified on server session. You should take the patch 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 into your fork.
|
| IEEE P802.11-REVme D1.1 through D7.0 allows FragAttacks against mesh networks. In mesh networks using Wi-Fi Protected Access (WPA, WPA2, or WPA3) or Wired Equivalent Privacy (WEP), an adversary can exploit this vulnerability to inject arbitrary frames towards devices that support receiving non-SSP A-MSDU frames. NOTE: this issue exists because of an incorrect fix for CVE-2020-24588. P802.11-REVme, as of early 2025, is a planned release of the 802.11 standard. |
