| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mvebu: free generic chips on unbind
irq_alloc_domain_generic_chips() allocates generic chip data that must
be freed via irq_domain_remove_generic_chips(). The devres action
mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which
only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set.
Call irq_domain_remove_generic_chips() explicitly before
irq_domain_remove() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/core: Avoid enabling BRS from the SVM reload path
Branch Sampling (BRS) and Last Branch Record (LBR) are mutually
exclusive hardware features, and users of both are tracked via
cpuc->lbr_users.
When SVM is toggled on a CPU, the host perf events are reprogrammed to
update the HostOnly filter bit (set when virtualization is enabled,
cleared when it is disabled). On PerfMonV2-capable processors, this
reprogramming is performed by calling amd_pmu_enable_all() to rewrite
the event selectors. However, amd_pmu_enable_all() also calls
amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0.
Having active LBR events satisfies this gating on processors that have
LBR but not BRS. The kernel then tries to set the BRS enable bit in
DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such
hardware, the write results in a #GP:
Call Trace:
<IRQ>
amd_pmu_enable_all+0x1d/0x90
amd_pmu_disable_virt+0x62/0xb0
kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm]
hardware_disable_nolock+0x1a/0x30 [kvm]
__flush_smp_call_function_queue+0x9b/0x410
__sysvec_call_function+0x18/0xc0
sysvec_call_function+0x69/0x90
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
RIP: 0010:cpuidle_enter_state+0xc4/0x450
? cpuidle_enter_state+0xb7/0x450
cpuidle_enter+0x29/0x40
cpuidle_idle_call+0xf5/0x160
do_idle+0x7b/0xe0
cpu_startup_entry+0x26/0x30
start_secondary+0x115/0x140
secondary_startup_64_no_verify+0x194/0x19b
</TASK>
Fix this by ensuring that BRS is not enabled from the event selector
reprogramming path even when cpuc->lbr_users > 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: admin-gate legacy LLSEC dump operations
In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table
builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV,
LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which
sets no .flags, so generic netlink runs them ungated. The modern
nl802154 family admin-gates the equivalent reads via
NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM.
Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve
the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev
that has an LLSEC key installed; the dump handler writes the raw
16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied
verbatim from struct ieee802154_llsec_key.key) into the reply.
Recovering the AES key compromises 802.15.4 LLSEC link confidentiality
and authenticity, since LLSEC uses CCM* and the same key authenticates
and encrypts frames.
Impact: any local uid with no capabilities can read the raw 16-byte
AES-128 LLSEC key from the kernel keytable on any wpan netdev that has
an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY
dump on the legacy IEEE802154_NL generic-netlink family.
Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but
setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump
entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the
modern nl802154 family exposes their equivalents to unprivileged
readers by design (NL802154_CMD_GET_WPAN_PHY and
NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged
users" annotations). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: use dst in this direction when pushing IPIP header
When pushing the IPIP header, the route of the other direction is used
to calculate the headroom, use the route in this direction. Accessing
the other tuple to set the IP source and destination is fine because
this tuple does not provide such information to avoid storing redundant
information. However, this tuple already provides the dst for this
direction, this went unnoticed because this bug affects headroom and
iph->frag_off only at this stage. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_fib: reject fib expression on the netdev egress hook
A fib expression in a netdev egress base chain dereferences nft_in(pkt),
NULL on the transmit path, causing a NULL pointer dereference at eval.
nft_fib_validate() masks the hook with NF_INET_* values, but netdev hook
numbers are a separate enum that aliases them (NF_NETDEV_EGRESS ==
NF_INET_LOCAL_IN), so an egress chain passes validation and then faults.
Add nft_fib_netdev_validate() that limits each result/flag to the netdev
hook where the device it reads exists: the input-device cases (OIF,
OIFNAME, ADDRTYPE with F_IIF) to ingress, the output-device case (ADDRTYPE
with F_OIF) to egress, ADDRTYPE with no device flag to both. Also restrict
nft_fib_validate() to NFPROTO_IPV4/IPV6/INET so its NF_INET_* masks are
not applied to another family's hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Check runtime resume during probe
The MT8192 AFE probe enables runtime PM temporarily while reinitializing
the regmap cache from hardware, but it uses pm_runtime_get_sync()
without checking the return value. If runtime resume fails, probe keeps
going without the device necessarily being accessible, and
pm_runtime_get_sync() may leave the PM usage count incremented.
The regmap_reinit_cache() failure path also returns before dropping the
temporary PM reference and before clearing pm_runtime_bypass_reg_ctl.
Use pm_runtime_resume_and_get() so resume failures do not leak a usage
count, and clear the temporary bypass flag after dropping the probe PM
reference on all regmap_reinit_cache() outcomes. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: nvidia: fix potential memory leak in nvidiafb_probe()
In nvidiafb_probe(), the memory allocated for modelist in
nvidia_set_fbinfo() is not freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: fix refcount leak in is_full_charged()
In is_full_charged(), power_supply_get_by_name() is called to
obtain a reference to the fuel_gauge power supply. If the
voltage check (uV >= desc->fullbatt_uV) succeeds, the function
returns true directly without releasing the reference, leaking
the refcount.
Fix this by setting a flag and jumping to the out label where
power_supply_put() properly drops the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path
LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling
processes outside its Landlock domain. It can be bypassed through the
asynchronous SIGIO delivery path.
A sandboxed process that owns any file or socket can arm it with
fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so
that an I/O event makes the kernel deliver the chosen signal to the
whole process group. As the head of its process group's task list (the
default position right after fork()) that group can also hold the
non-sandboxed process that launched it, e.g. a supervisor or a security
monitor. The sandbox can thus kill or signal the processes
LANDLOCK_SCOPE_SIGNAL is meant to protect from it.
The scope is enforced in hook_file_send_sigiotask() against the Landlock
domain recorded at F_SETOWN time, not the live domain of the sender.
control_current_fowner() decides whether to record that domain and skips
recording it when the fowner target is in the caller's thread group,
which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID).
For a process group (PIDTYPE_PGID) pid_task() returns only one member;
recording is skipped whenever that member shares the caller's thread
group, and hook_file_send_sigiotask() then lets the signal fan out to
the whole group unchecked.
Record the domain for every non single-process target so the scope is
enforced against each group member at delivery time.
That recording is necessary but not sufficient on its own: the kernel
signals a process group through its members' thread-group leaders, and
the leader of the registrant's own process can carry a different
Landlock domain than the sibling thread that armed the owner.
domain_is_scoped() would then deny that leader, even though commit
18eb75f3af40 ("landlock: Always allow signals between threads of the
same process") requires same-process delivery to be allowed.
hook_task_kill() avoids this by evaluating same_thread_group() live, per
recipient; the SIGIO path instead delegates the whole decision to a
single registration-time check, which a process-group fan-out cannot
honor.
So also record the registrant's thread group next to its domain and
exempt it at delivery: hook_file_send_sigiotask() allows the signal
whenever the recipient belongs to the registrant's own process,
restoring the same-process guarantee while keeping out-of-domain group
members blocked. The direct kill() path (hook_task_kill) already
evaluates the live domain and is unaffected.
[mic: Check pid_type earlier and improve comment, fix commit message,
fix comment formatting] |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix hole runlist memory leak in insert range error path
ntfs_non_resident_attr_insert_range() allocates hole_rl before mapping the
whole runlist. If ntfs_attr_map_whole_runlist() fails, the error path drops
ni->runlist.lock and returns without freeing hole_rl. This leaks memory
of sizeof(*hole_rl) * 2 bytes.
Fix this memory leak by freeing hole_rl before returning from
that error path, matching the later error paths in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name()
ntfs_lookup_inode_by_name() returns MFT references read from directory
index entries on disk. These values are untrusted, but the function can
currently return an error-marked MFT reference to its callers without
validating it.
Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image
can set the MREF error bit while leaving the low bits as an arbitrary
value, causing callers to consume a bogus pseudo-errno instead of treating
the lookup result as corrupted on-disk metadata.
Fix this at the source by normalizing every error-marked MFT reference
returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to
all four directory lookup return paths so every caller gets a validated
result without needing additional checks or an API change.
This keeps the sanitization in the common lookup helper, which is cleaner
than duplicating validation in each caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fail attrlist updates when the superblock is inactive
generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes.
If eviction selects the fake inode for a base inode's unnamed
$ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's
reference on the base inode while the fake inode is still hashed and marked
I_FREEING.
That iput can synchronously write back the base inode. The writeback path
may update mapping pairs and call ntfs_attrlist_update(), which
unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake
inode. VFS then finds the I_FREEING inode and waits for eviction to finish,
but the current task is still inside that eviction path, causing a
self-deadlock in find_inode().
Fix this by mirroring the teardown guard used by __ntfs_write_inode():
once SB_ACTIVE has been cleared, do not try to iget the attribute-list
fake inode. Return -EIO so teardown aborts the update instead of waiting on
the inode it is evicting. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject non-resident records for resident-only attributes
The shared lookup-time attribute validator rejects non-resident
$FILE_NAME and $VOLUME_NAME records because their formats require
resident values and callers handle returned records as resident
attributes. Other resident-only attribute types still pass through the
generic non-resident mapping-pairs checks.
That leaves real resident/non-resident union confusion paths. Inode load
looks up $STANDARD_INFORMATION and then reads data.resident.value_offset
without checking a->non_resident. ntfs_inode_sync_standard_information()
does the same when updating the standard information value.
ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads
data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and
index.c depend on the same lookup contract before consuming the resident
index root value.
Reject non-resident records for all resident-only attribute types in the
shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior,
but factor it through a helper and extend it to
$STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and
$EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract
hardening for resident-only formats; this patch only rejects the
non-resident form and does not add new resident value validation for
those types. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe()
In tdfxfb_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not
freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: s3fb: fix potential memory leak in s3_pci_probe()
In s3_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist() |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: i740fb: fix potential memory leak in i740fb_probe()
In i740fb_probe(), the memory allocated in fb_videomode_to_modelist()
for modelist is not freed in the error paths. Fix that by calling
fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: radeon: fix potential memory leak in radeonfb_pci_register()
The function radeonfb_pci_register() allocates memory for modelist
(by calling radeon_check_modes() which calls fb_add_videomode()).
The memory is appended to info->modelist, but is not freed in subsequent
error paths. Fix this by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hecubafb: fix potential memory leak in hecubafb_probe()
The memory allocated for pagerefs in fb_deferred_io_init() is not freed
on the error path. Fix it by calling fb_deferred_io_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: broadsheetfb: fix potential memory leak in broadsheetfb_probe()
The memory allocated for pagerefs in fb_deferred_io_init() is not freed
on the error path. Fix it by calling fb_deferred_io_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Re-translate VNCR before injecting abort
KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts
for a write, similar to how a regular stage-2 mapping is handled. It is
entirely possible that the guest reads from the VNCR before writing to
it, in which case the PFN could only be read-only.
Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR
abort, allowing the host mapping to be faulted in for write the second
time around. Interestingly enough, this also satisfies the ordering
requirements of FEAT_ETS2/3 between descriptor updates and MMU faults. |
