| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 NIM server process is crashing during client registration due to buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote authenticated attacker to execute arbitrary code due to a stack-based buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a stack-based buffer overflow. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.
This vulnerability is due to improper range checking when decompressing VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause an overflow of heap data, which could cause a DoS condition. |
| FFmpeg before commit 65b0dab contains an out-of-bounds read in the DASH demuxer (libavformat/dashdec.c). When a live DASH manifest is refreshed with a startNumber that is lower than the previous value, the current sequence number is driven negative. The fragment retrieval function checked only the upper bound before indexing the fragments array, allowing a negative index to be used and causing an out-of-bounds read. A malicious or misconfigured DASH server can trigger this by serving a live manifest with a decreasing startNumber across a manifest refresh. |
| A security flaw has been discovered in TRENDnet TV-IP751WIC 11.03.03. Affected by this issue is some unknown functionality of the file /cgi-bin/admin/set_time.cgi of the component alphapd. The manipulation of the argument Currenttime results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| Integer overflow or wraparound in Windows Device Health Attestation (DHA) allows an unauthorized attacker to execute code over a network. |
| A vulnerability was detected in TrailDB 0.6. Impacted is the function tdb_open of the file /src/tdb.c of the component TOC Validation. The manipulation results in out-of-bounds read. It is possible to launch the attack remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in liftoff-sr CIPster 1802525be27d33e19a9a83c163e331a1d13b1892. This affects the function CipConnMgrClass::forward_open of the file cipconnectionmanager.cc of the component ForwardOpen Handler. Executing a manipulation of the argument product_code_ can lead to out-of-bounds read. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. This patch is called ea870a274bf68dfaa3f511f20e2fff6778fb7b74. A patch should be applied to remediate this issue. |
| jxl-oxide is a pure Rust implementation of a JPEG XL decoder. Prior to jxl-grid 0.6.2, decoding a crafted JPEG XL image on a 32-bit platform can overflow length calculations in AlignedGrid::with_alloc_tracker and related grid and subgrid arithmetic. A 65536 x 65536 frame can pass the frame-area limit while overflowing the usize element count, causing modular, VarDCT, or filter rendering paths to allocate a backing buffer smaller than the logical grid. A tiny bitstream-controlled cropped frame combined with a huge canvas or requested region can also reach the vulnerable composition path in crates/jxl-render/src/blend.rs through ordinary render_frame(). Later mutable subgrid and raw-pointer operations can then perform attacker-controlled out-of-bounds writes, causing memory corruption, denial of service, or arbitrary code execution. This issue is fixed in jxl-grid version 0.6.2. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.6, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A memory corruption issue was addressed with improved state management. This issue is fixed in Safari 26.6, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A vulnerability in the XAR file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in XAR files during scanning. An attacker could exploit this vulnerability by submitting a crafted file that contains XAR content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| libvips is a fast image processing library with low memory needs. The EXIF decoder within libvips versions before and including 8.18.1 was not verifying the range of EXIF tag groups before passing data to libexif, leading to a possible null pointer dereference and crash. This has been patched in version 8.18.2. |
| libvips is a fast image processing library with low memory needs. The `tiffload` operation in libvips versions before and including 8.18.1 could incorrectly determine the number of channels in a JPEG or JPEG2000-encoded tile within a TIFF image, leading to a possible buffer overflow. This has been patched in version 8.18.2. |
| A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C100/C101 v5, C520WS v2.6 in the HTTP POST body parsing logic due to missing validation of remaining buffer capacity after dynamic allocation, due to insufficient boundary validation when handling externally supplied HTTP input.
An attacker
on the same network segment could trigger heap memory corruption conditions by
sending crafted payloads that cause write operations beyond allocated buffer
boundaries. Successful exploitation
causes a Denial-of-Service (DoS) condition, causing the device’s process to
crash or become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: fix out-of-bounds read in keyring_get_key_chunk()
For description-level chunks keyring_get_key_chunk() advances the read
pointer by level * sizeof(long) past the inline prefix but only
bounds-checks the prefix, so a long enough key description is read past
its kmemdup(desc, desc_len + 1) allocation. Compute the full byte
offset and bounds-check the description against it before reading.
The walk only reaches a description-level chunk when two keys collide
through the hash, x, type and domain_tag chunks, so this is reached from
an unprivileged add_key(2) with a crafted pair of same-type keys whose
index hashes collide; KASAN reports a slab-out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer
iscsi_tcp_hdr_dissect() receives the data segment of several PDU types
into the fixed-size conn->data buffer, which is allocated for
ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP,
REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU
whose DataSegmentLength exceeds that buffer.
The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its
data segment (sense/response data) into conn->data via
iscsi_tcp_data_recv_prep(), but it does so without the same check. The
only upstream bound on in.datalen is conn->max_recv_dlength, the
initiator's advertised MaxRecvDataSegmentLength, which is commonly
negotiated well above 8192 (open-iscsi defaults to 262144). A target
that returns a SCSI Response with a DataSegmentLength between 8193 and
max_recv_dlength therefore overflows the 8192-byte conn->data buffer.
Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly
like those responses: bound the data segment, receive it into conn->data
when present, and otherwise complete the PDU with no data. Fold the
opcode into that case group rather than duplicating the check. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775-core) Fix number of temperature registers for NCT6116
Unlike NCT6106, NCT6116 only has three temperature registers, and with
it only three temperature source and temperature source configuration
registers. The register addresses match those of NCT6106 and can be
re-used.
The code used a separate array to list the temperature source registers
for NCT6116, but used the size of the NCT6106 register array to set
the number of registers. The NCT6106 register array provides six addresses,
while the temperature source register array for NCT6116 only provides three
addresses. This causes a KASAN report.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775]
Read of size 2 at addr ffffffffc19561a6 by task modprobe/954
...
Call Trace:
dump_stack+0x7d/0xa7
print_address_description.constprop.0+0x1c/0x220
? __kasan_kmalloc.constprop.0+0xc9/0xd0
? __kmalloc_node_track_caller+0x194/0x5b0
? nct6775_probe+0x936/0x46f0 [nct6775]
? nct6775_probe+0x936/0x46f0 [nct6775]
...
Fix the problem by hard-coding the number of temperature and temperature
configuration registers to three for NCT6116. Drop the unnecessary
NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: reject a flag character as the field delimiter
The registration string starts with a user chosen delimiter that
separates the individual fields. So that the field parsers terminate
even on a truncated string create_entry() pads the buffer with that
same delimiter:
memset(buf + count, del, 8);
Most fields are scanned for the delimiter with strchr()/scanarg() and
happily stop on the padding. The flags field is different: instead of
scanning for the delimiter check_special_flags() consumes the flag
characters 'P', 'O', 'C' and 'F' and stops at the first byte that is
none of them, relying on the trailing delimiter to end the scan.
If the delimiter is itself a flag character the padding no longer acts
as a terminator. The scan swallows all eight padding bytes and keeps
reading past the end of the allocation until it hits a byte that is
not a flag character. For example registering
PaPEPPxPPiP
with 'P' as the delimiter (name "a", type extension, magic "x",
interpreter "i", empty flags) leaves the flag scan running off the end
of the buffer. The registration is rejected in the end because the
parser does not stop exactly at buf + count, but only after the out of
bounds read has already happened. With an unlucky allocation layout the
scan can walk into an unmapped page; under KASAN it is reported as a
slab out of bounds read. binfmt_misc mounts are available to
unprivileged users in a user namespace so the read is reachable without
privileges.
Reject a delimiter that is one of the flag characters up front. Such a
registration was always rejected anyway, only after the out of bounds
read, so no valid registration string changes meaning. |
