| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
VDUSE: avoid leaking information to userspace
The bounceing is not necessarily page aligned, so current VDUSE can
leak kernel information through mapping bounce pages to
userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: restrict socket queue dumps in enqueue tracepoints
tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is
owned by user context. The spinlock protects the backlog queue in this
path, but it does not serialize against the socket owner consuming or
purging sk_receive_queue.
KASAN reported:
CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123
print_report+0xce/0x5b0 mm/kasan/report.c:482
kasan_report+0xc6/0x100 mm/kasan/report.c:597
__asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380
tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73
tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187
tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996
trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188
tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497
tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689
__tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512
tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400
sock_sendmsg+0x2f6/0x3e0 net/socket.c:825
splice_to_socket+0x7f9/0x1010 fs/splice.c:884
do_splice+0xe21/0x2330 fs/splice.c:936
__do_splice+0x153/0x260 fs/splice.c:1431
__x64_sys_splice+0x150/0x230 fs/splice.c:1616
x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41
do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63
entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130
RIP: 0033:0x71624e8aafe2
Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66
RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113
RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2
RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066
RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00
R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40
</TASK>
The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump
sk_receive_queue and can therefore dereference skbs that the socket
owner has already dequeued or freed. Restrict these dumps to
TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held
spinlock.
Keep the change limited to the enqueue path, where the unsafe queue dump
is reachable while the socket is owned by user context. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Check runtime resume during probe
The MT8192 AFE probe enables runtime PM temporarily while reinitializing
the regmap cache from hardware, but it uses pm_runtime_get_sync()
without checking the return value. If runtime resume fails, probe keeps
going without the device necessarily being accessible, and
pm_runtime_get_sync() may leave the PM usage count incremented.
The regmap_reinit_cache() failure path also returns before dropping the
temporary PM reference and before clearing pm_runtime_bypass_reg_ctl.
Use pm_runtime_resume_and_get() so resume failures do not leak a usage
count, and clear the temporary bypass flag after dropping the probe PM
reference on all regmap_reinit_cache() outcomes. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: don't leak bad clone into future transaction
On memory allocation failure the cloned nft_pipapo_match can enter a bad
state:
- some fields can have their lookup tables resized while others did
not
- bits might have been toggled
- scratch map can be undersized which also means m->bsize_max can be
lower than what is required
This means that the next insertion in the same batch can trigger
out-of-bounds writes.
Furthermore, a failure in the first can result in the bad clone to
leak into the next transaction because the abort callback is never
executed in this case (the upper layer saw an error and no attempt to
allocate a transactional request was made).
Record a state for the nft_pipapo_match structure:
- NEW (pristine clone)
- MOD (modified clone with good state)
- ERR (potentially bogus content)
Then make it so that deletes and insertions fail when the clone
entered ERR state.
In case the very first insert attempt results in an error, free the
clone right away. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: avoid sk_socket dereference in selinux_sctp_bind_connect()
selinux_sctp_bind_connect() dereferences sk->sk_socket to pass a
struct socket * to selinux_socket_bind() and
selinux_socket_connect_helper(). However, when the hook is invoked
from the ASCONF softirq path (sctp_process_asconf), there is no file
reference guaranteeing that sk->sk_socket is non-NULL. The setsockopt
callers (bindx, connectx, set_primary, sendmsg connect) hold a file
reference and are not affected.
Both selinux_socket_bind() and selinux_socket_connect_helper()
immediately resolve sock->sk, never using the struct socket * for
anything else. Refactor the inner logic into helpers that take a
struct sock * directly so that selinux_sctp_bind_connect() never needs
to touch sk->sk_socket at all. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: Fix leak when custom dump_segments addition fails
Free allocated minidump_region 'name' in qcom_add_minidump_segments()
when failing before adding the region to 'dump_segments'. Otherwise,
the 'name' is not tracked and is never freed by qcom_minidump_cleanup().
Return error when adding to 'dump_segments' fails. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: skip nlink update in cacheless mode to fix WARN_ON
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink > 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix infinite loop in p9_client_rpc on fatal signal
When p9_client_rpc() is called with type P9_TFLUSH and the transport
has no peer (e.g. fd transport backed by pipes with no 9p server),
a fatal signal causes an infinite loop:
again:
err = io_wait_event_killable(req->wq, ...)
/* SIGKILL wakes the task, returns -ERESTARTSYS */
if (err == -ERESTARTSYS && c->status == Connected &&
type == P9_TFLUSH) {
sigpending = 1;
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
clear_thread_flag() clears TIF_SIGPENDING before jumping back to
io_wait_event_killable(). signal_pending_state() checks TIF_SIGPENDING,
finds it zero, and the task goes to sleep again. The task can only wake
on the next signal delivery that calls signal_wake_up() and sets
TIF_SIGPENDING again. When that happens the loop repeats, clears
TIF_SIGPENDING, and sleeps again indefinitely.
This is triggered in practice by coredump_wait(): when a thread in a
multi-threaded process causes a coredump (e.g. via SIGSYS from Syscall
User Dispatch), coredump_wait() sends SIGKILL to all other threads and
waits for them to call mm_release(). If one of those threads is blocked
in p9_client_rpc() over an fd transport with no peer, it enters the
P9_TFLUSH loop and never calls mm_release(), so coredump_wait() stalls
forever:
INFO: task syz.0.18:676 blocked for more than 143 seconds.
Not tainted 6.12.77+ #1
task:syz.0.18 state:D stack:27600 pid:676 tgid:673 ppid:630 flags:0x00000004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5344 [inline]
__schedule+0xcb4/0x5d50 kernel/sched/core.c:6724
__schedule_loop kernel/sched/core.c:6801 [inline]
schedule+0xe5/0x350 kernel/sched/core.c:6816
schedule_timeout+0x253/0x290 kernel/time/timer.c:2593
do_wait_for_common kernel/sched/completion.c:95 [inline]
__wait_for_common+0x409/0x600 kernel/sched/completion.c:116
wait_for_common kernel/sched/completion.c:127 [inline]
wait_for_completion_state+0x1d/0x40 kernel/sched/completion.c:264
coredump_wait fs/coredump.c:448 [inline]
do_coredump+0x854/0x4350 fs/coredump.c:629
get_signal+0x1425/0x2730 kernel/signal.c:2903
arch_do_signal_or_restart+0x81/0x880 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xf9/0x160 kernel/entry/common.c:218
do_syscall_64+0x102/0x220 arch/x86/entry/common.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix: check fatal_signal_pending() before clearing TIF_SIGPENDING in the
P9_TFLUSH retry loop. At that point TIF_SIGPENDING is still set, so
fatal_signal_pending() works correctly. If a fatal signal is pending,
jump to recalc_sigpending to restore TIF_SIGPENDING and return
-ERESTARTSYS to the caller.
The same defect is present in stable kernels back to 5.4. On those
kernels the infinite loop is broken earlier by a second SIGKILL from
the parent process (e.g. kill_and_wait() retrying after a timeout),
resulting in a zombie process and a shutdown delay rather than a
permanent D-state hang, but the underlying flaw is the same.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: swp: Improve locking user experience
In the case of the first block being locked (or the few first blocks),
if the user want to fully unlock the device it has two possibilities:
- either it asks to unlock the entire device, and this works;
- or it asks to unlock just the block(s) that are currently locked,
which fails.
It fails because the conditions "can_be_top" and "can_be_bottom" are
true. Indeed, in this case, we unlock everything, so the TB bit does not
matter. However in the current implementation, use_top would be true (as
this is the favourite option) and lock_len, which in practice should be
reduced down to 0, is set to "nor->params->size - (ofs + len)" which is
a positive number. This is wrong.
An easy way is to simply add an extra condition. In the unlock() path,
if we can achieve the same result from both sides, it means we unlock
everything and lock_len must simply be 0. A comment is added to clarify
that logic. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat()
wait_event_interruptible_timeout() evaluates its condition after setting
the current task state to TASK_INTERRUPTIBLE.
With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait
path is used:
tpm_tis_status()
tpm_tis_spi_read_bytes()
tpm_tis_spi_transfer_full()
spi_bus_lock()
mutex_lock()
Address this with the following measures:
1. Call wait_tpm_stat_cond() only while tasking is running.
2. Use wait_woken() to wait for changes. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
The DONE_INT_MASK and ABORT_INT_MASK registers are shared by all DMA
channels, and modifying them requires a read-modify-write sequence.
Because this operation is not atomic, concurrent calls to
dw_edma_v0_core_start() can introduce race conditions if two channels
update these registers simultaneously.
Add a spinlock to serialize access to these registers and prevent race
conditions.
[den: update dw_edma.lock comment] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix firmware leak in async update
The firmware object was not being released if validation failed.
Use __free(firmware) to ensure the firmware is always released. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix use-after-free in lbtf_free_adapter()
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: tegra: do not call pinctrl for GPIO direction
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mt7621: avoid corruption of shared interrupt trigger state
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ixp4xx_hss: fix duplicate HDLC netdev allocation
ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored
in ndev, initialized, and registered with register_hdlc_device(). The
second one is stored in port->netdev and later used by the remove path
for unregister_hdlc_device() and free_netdev().
This means that the registered netdev is not the same object that is
unregistered and freed on remove. It also leaks the first allocation if
the second alloc_hdlcdev() call fails, and the first allocation is not
checked before ndev is used.
Older code allocated the HDLC netdev only once and stored the same object
in both the local variable and port->netdev. The buggy conversion split
this into two alloc_hdlcdev() calls. A later rename changed the local
variable name to ndev, but the underlying mismatch remained.
Fix this by allocating the HDLC netdev only once and assigning the same
object to port->netdev. |
