| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Fix board ID over-read
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: add permission check for KDSKBMETA ioctl
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix buffer length in create_direct_keys()
We have seen in our CI the following KASAN message:
BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core]
Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764
[...]
[<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core]
[<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core]
[<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa]
[<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa]
[...]
The buggy address is located 4128 bytes inside of
allocated 4384-byte region [0000000176794000, 0000000176795120)
So in essence we read 16 bytes beyond 4384-byte allocation.
create_direct_keys calculates the pointer and length for in and out
buffers.
The size calculation for in includes the entire structure
size (out + in + mtt[]) but the pointer passed to cmd_exec points only
to the 'in' field, skipping the 'out' field.
This causes mlx5_copy_to_msg() to read beyond the allocated buffer
by sizeof(out) bytes when copying command data.
Properly calculate the input size to match the pointer and allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix netdev use-after-free in beacon worker
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke
When an invoke is interrupted by a signal,
wait_for_completion_interruptible() returns -ERESTARTSYS and
fastrpc_internal_invoke() moves every buffer from fl->mmaps onto
cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk
runs without holding fl->lock, the lock that serialises fl->mmaps in
fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else.
Take fl->lock around the move, matching every other fl->mmaps accessor. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Serialize accesses to the owner and mirror list with separate lock
Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and
KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues:
- in sev_migrate_from(), when the destination KVM is a mirror, the mirror
entry is moved from the source's list to the owner's mirror_vms list,
without holding the owner's lock unlike other writers of the owner's
mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()).
A concurrent COPY or destroy can race with sev_migrate_from() and
corrupt the list.
- In sev_vm_destroy(), the *owner* is still active and could receive
concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes
sev->enc_context_owner to change. In this case the incorrect VM
receives kvm_put_kvm().
The second issue needs particular care because the owner could disappear
altogether (even though the race window is impossibly small) between
reading it and locking it. There is thus no way to perform the checks
under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU
(which would allow kvm_get_kvm_safe() under RCU critical section).
It is much simpler to just use a global lock, since the critical
sections are so small and the new lock is always a leaf lock. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Fix use-after-free in eventfs_remove_rec()
eventfs_remove_rec() recursively removes the child at the current loop
position. After the recursive call returns, list_for_each_entry() advances
by reading list.next from the removed child.
If free_ei() drops the final reference, release_ei() reuses the list/rcu
union to queue an SRCU callback. The child may be freed before that read.
The eventfs_mutex serializes list updates, but it does not keep the removed
child alive or prevent the SRCU callback from running.
Use list_for_each_entry_safe() to save the next sibling before recursively
removing the current child. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: use the mount idmap for the owner check in fscrypt_ioctl_set_policy()
fscrypt_ioctl_set_policy() calls inode_owner_or_capable() with
&nop_mnt_idmap before allowing an encryption policy to be set, instead
of the idmap of the mount the ioctl was issued on.
fscrypt is used by filesystems that support idmapped mounts (e.g. ext4,
f2fs), so on such a mount this compares the caller's fsuid against the
unmapped on-disk owner rather than the mapped owner: the actual owner
can be wrongly denied with -EACCES and an unrelated caller wrongly
allowed. Use file_mnt_idmap(filp) instead. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: __filemap_add_folio() restore index before retrying
In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is
applied repeatedly: each application modifies xas.xa_index, rounding it
down according to the split_order attempted at that stage: and if all goes
as intended, it eventually (or immediately) converges on an
xas_try_split() to the required folio_order, with xas.xa_index now the
same as index: then xas_store() puts the new folio into the xarray there.
But if a new node was needed, and GFP_NOWAIT allocation did not get one,
the lock is dropped, xas_nomem() used to allocate, and sequence retried.
If (that part of) the xarray is unchanged when the lock is reacquired, no
problem. But what if the conflict was meanwhile resolved by another
thread (perhaps even doing the same thing, inserting a folio at that same
index)? Isn't there a danger of now putting our folio into the xarray at
an intermediate rounded-down index? With !folio_contains() bug to follow,
when CONFIG_DEBUG_VM=y is checking for that.
Fix this with an xas_set_order() to restore the original xas.xa_index at
the bottom of the loop, so the retry does a full re-evaluation after
reacquiring the lock, and cannot reach xas_store() with the wrong index.
Production was suffering from rare SIGILLs and SIGSEGVs, executable text
found a page away from where it belonged, !folio_contains() bug hit when
debug enabled: symptoms not seen since this patch went in. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: keep chunk->transport in step with the list it is queued on
__sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's
transmitted list without updating chunk->transport:
if (chunk->tsn_gap_acked) {
list_move_tail(&chunk->transmitted_list,
&transport->transmitted);
continue;
}
The chunk then sits on a live transport's list while chunk->transport still
names a different one. If that transport is removed - sctp_assoc_rm_peer()
from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk
is left with a dangling pointer. sctp_assoc_rm_peer() scrubs
peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on
neither.
The pointer is not followed while tsn_gap_acked is set. A SACK that
reneges on the TSN clears the flag, and the next SACK reaches
tchunk->transport->flight_size -= sctp_data_size(tchunk);
inside the freed transport. KASAN reports a slab-use-after-free read in
sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the
removal and the SACKs come from the association peer.
Set chunk->transport at the move. The ordinary resend path needs nothing:
it reaches its list_move_tail() only after sctp_packet_append_chunk()
returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the
chunk by then.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: zero shared page before exposing to userspace
bnxt_re_alloc_ucontext() allocates uctx->shpg via
__get_free_page(GFP_KERNEL). The buddy allocator does not zero pages
without __GFP_ZERO, so the page contains stale kernel data from
whatever object most recently freed it.
The page is then mapped into userspace via vm_insert_page() under
BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes
4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside
bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed
to userspace unsanitised, leaking kernel memory contents.
Any user with access to /dev/infiniband/uverbsX on a host with a
bnxt_re device (typically rdma group membership) can read this data
via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT.
Other shared pages in the same file already use get_zeroed_page()
correctly:
drivers/infiniband/hw/bnxt_re/ib_verbs.c
srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL);
cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL);
uctx->shpg is the only outlier. Bring it in line with the existing
convention by switching to get_zeroed_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_route: fix fastmap use-after-free on filter
The route4 classifier maintains a 16-slot fastmap cache that stores raw
struct route4_filter pointers indexed by (id, iif). The reader
(route4_classify) populates this cache via route4_set_fastmap() for every
classified packet that hits a filter. The writer (route4_delete,
route4_change) clears the cache via route4_reset_fastmap() before
RCU-deferred kfree of the filter.
This creates a UAF race:
1. Reader walks the RCU-protected bucket chain, finds filter f
2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work()
3. Reader calls route4_set_fastmap() and writes f into the cache
*after* the writer's reset, caching a pointer about to be freed
4. After the RCU grace period, kfree(f) executes
5. Next classified packet on the same (id, iif) tuple hits the stale
fastmap entry and reads f->res from freed memory
Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a
concurrent add/delete stress test (provided by both zdi and Santosh).
Both triggered KASAN slab-use-after-free reports in the route4 fastmap
paths.
Fix:
Introduce a per-filter boolean dying flag to suppress stale fastmap
republishing by in-flight readers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: fix mask build for partial field offload
nft_payload_offload_mask() builds the offload match mask for a payload
expression that covers only part of a header field. For a partial IPv6
address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which
is undefined on the 32-bit int operand. It also trims only one word, so
the remaining words stay 0xffffffff (and when priv_len is a multiple of 4
the trim is skipped entirely), leaving the mask covering more bytes than
the rule matches.
UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20
shift exponent 120 is too large for 32-bit type 'int'
...
The match is byte-granular and struct nft_data is zero-initialised, so the
correct mask is simply the first priv_len bytes set to 0xff. Set those
bytes directly and drop the word/shift trimming; this removes the undefined
shift and no longer over-masks the trailing bytes. |
| Joomla Extension - joomlack.fr - Reflected XSS in Page Builder CK < 3.6.5 - The Joomla extension Page Builder CK is vulnerable to a reflected XSS via the iscontenttype parameter. |
| Joomla Extension - joomlack.fr - Second order SQL injection in Page Builder CK < 3.6.5 - The Joomla extension Page Builder CK is vulnerable to a SQL injection issue related to the loadStyles method of the frontend page model. |
| Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in an array item default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0. |
| A memory leak flaw was found in cockpit-ws. The login page handler leaks a heap allocation on every unauthenticated request that carries a CockpitLang cookie, allowing a remote unauthenticated attacker to exhaust memory on the host and cause a denial of service. |
| Renovate versions from 31.51.0 before 40.33.0 contain a command injection vulnerability in the helmv3 manager where the repository parameter is appended to helm registry login commands without proper sanitization. Attackers with repository write access can craft malicious Chart.yaml files to execute arbitrary commands on the machine running Renovate. |
| A vulnerability has been found in BusyBox up to 1.30.1. This vulnerability affects unknown code of the file networking/wget.c of the component FEATURE_WGET_TIMEOUT Handler. Such manipulation of the argument -T leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The name of the patch is 83a40bf7a93c8ac093d33ab452222dd5b9eb57ff. A patch should be applied to remediate this issue. |
