| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in Autofill in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in Views in Google Chrome on on Mac prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Uncontrolled Resource Consumption vulnerability in Apache Tomcat via an allocation leak in the HTTP/2 backlog tracking when a stream is reset
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.39 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.59 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Subscriber Broken Access Control in Push Notification for Post and BuddyPress <= 3.20 versions. |
| Use after free in Sessions in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to execute arbitrary code outside the sandbox via UI Interaction. (Chromium security severity: Medium) |
| Buffer overflow in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper input validation in Input in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient Session Expiration vulnerability in Apache Tomcat meant that if the session ID for an authenticated HTTP session was changed after a WebSocket connection had been established under that authenticated HTTP session, the WebSokcet session would not be closed as required by the Jakarta WebSocket specification when the HTTP session ended.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.43 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Incorrect authorization in Forms in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Free all memory if cp_init() fails
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix ilock leak on error in xfs_dq_get_next_id
xfs_dq_get_next_id() takes the quota inode ILOCK before calling
xfs_iread_extents(). If xfs_iread_extents() fails, the function returns
immediately without releasing the lock, leaking the quota inode ILOCK.
This can leave the quota inode locked and cause subsequent quota
operations to hang.
Fix this by jumping to a common unlock path on error instead of returning
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: fix TX DMA buffer flush
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in WMM_param_handler()
WMM_param_handler() copies a fixed-size WMM parameter element out of a
received information element without checking that the element is long
enough, causing an out-of-bounds read for a short WMM IE.
The handler reads sizeof(struct WMM_para_element) (18) bytes at
pIE->data + 6, so it requires pIE->length to be at least 24
(WLAN_WMM_LEN), but it never validates the length. Two of its three
callers reach it after matching only the WMM OUI: OnAssocRsp() in
rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a
4-byte OUI, before calling the handler. A vendor-specific IE carrying
the WMM OUI but a length between 6 and 23, placed in an association
response or in the IE blob handed to join_cmd_hdl(), passes the OUI
check and then makes the memcmp() and memcpy() at pIE->data + 6 read
past the end of the element. OnAssocRsp() parses a frame received from
the AP, so this is reachable from a remote peer.
The remaining caller in rtw_wlan_util.c already guards the handler with
"pIE->length == WLAN_WMM_LEN". Move the equivalent check into the
handler itself so every caller is covered; the sibling IE handlers in
the same parsing loop (HT_caps_handler(), HT_info_handler(),
ERP_IE_handler()) likewise bound their accesses by pIE->length. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Remove buffer from list prior to unmap operation
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix group leader use-after-free after sibling detach
perf_group_detach() handles leader and sibling detach differently. When the
group leader is detached, all siblings are promoted to singleton events and
their group_leader pointer is reset to themselves. When a sibling is
detached, it is removed from the leader's sibling_list, but its
group_leader pointer is left pointing at the old leader.
That is harmless when the sibling is being closed and freed immediately, as
in the DETACH_DEAD path. It is not safe when the sibling is detached but
kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the
sibling is removed from the context, while its file descriptor can still
keep it alive.
A typical failing sequence is:
- A group contains leader L and sibling S.
- CPU hot-unplug detaches S with DETACH_GROUP, removing it from
L->sibling_list but leaving S->group_leader == L.
- L is later closed and freed.
- A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and
dereferences the freed leader.
This was reproduced by running the perf event fuzzer, CPU hotplug, and a
stress workload concurrently:
Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb
CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT
pc : perf_ioctl+0x34c/0xc68
x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b
Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908)
Call trace:
perf_ioctl+0x34c/0xc68 (P)
__arm64_sys_ioctl+0xa0/0xf4
invoke_syscall+0x58/0xe4
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xc0
el0t_64_sync_handler+0x68/0xdc
el0t_64_sync+0x1c4/0x1c8
The fault happened in perf_ioctl(), where perf_event_for_each() follows
the stale group_leader pointer and perf_event_for_each_child() then
dereferences the freed leader's context.
Fix the use-after-free by promoting the detached sibling to a singleton.
Also fix __event_disable() cgroup accounting and event state change. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix huge_zero_pfn race
Patch series "mm/huge_memory: fix huge_zero_pfn race", v2.
There is a subtle race in the reference-counted huge_zero_folio
implementation.
The fast path atomic logic fails to account for the fact that the shrinker
(which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn
with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a
racing get_huge_zero_folio() installed a valid value there.
This results in huge_zero_folio being correctly set but huge_zero_pfn
being set incorrectly and thus is_huge_zero_pfn() and consequently
is_huge_zero_pmd() will misidentify the huge zero folio as being an
ordinary THP folio.
This can result in the huge zero folio being split and otherwise treated
incorrectly.
The solution to this is very subtle as there is an atomic fast path, and
thus ordering in weakly ordered architectures has to be treated very
carefully.
The first commit fixes the issue by introducing a spinlock around
huge_zero_[pfn, folio, refcount] write, with careful consideration paid to
load/store ordering in the fast path. It is placed first and kept as
small as possible so that it can be backported on its own.
The second commit is a pure cleanup which reworks the
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent
logic from the dynamically allocated one.
This patch (of 2):
If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted
by huge_zero_refcount and returned by mm_get_huge_zero_folio().
When the caller is done with the huge zero page, its reference count is
decremented. Only a shrinker can set the reference count to zero.
A race can unfortunately occur between a shrinker decrementing the
reference count to zero and a concurrent page fault.
This is because shrink_huge_zero_folio_scan() might, if very unlucky, be
preempted between setting huge_zero_refcount to zero and writing an
invalid value.
During this time get_huge_zero_folio() could write to huge_zero_pfn before
shrink_huge_zero_folio_scan() resumes.
In this event the huge zero folio will be persistently misidentified
causing the THP code path to be entered inappropriately for the huge zero
folio:
CPU 0 CPU 1
=======================================|=================================
shrink_huge_zero_folio_scan() |
atomic_cmpxchg() sets refcount to 0 |
xchg() sets huge_zero_folio to NULL | get_huge_zero_folio()
| | atomic_inc_not_zero() -> zero
preempted for a long time | Allocate new huge zero folio
| | Write valid huge_zero_folio
v | Write valid huge_zero_pfn
Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite!
This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly
returning false for a huge zero page which could result in issues like the
huge zero folio being incorrectly split.
Note that the issue is with huge_zero_pfn not huge_zero_folio, as
get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL
with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set
huge_zero_folio.
Fix the issue by introducing a spinlock, huge_zero_lock, to prevent
concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount.
There needs to be significant care taken here to ensure correctness:
The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which
is outside of the critical section, and means huge zero allocation is
gated on zero huge_zero_refcount.
The fast path doesn't use huge_zero_lock, so the critical section is
irrelevant to it.
So invariants are required - huge_zero_refcount MUST:
* Only be set in the huge_zero_lock critical section to ensure
serialisation of huge_zero_pfn, huge_zero_folio and
---truncated--- |
