| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return value and fail the request through the normal
error path instead of forcing DASD_CQR_SUCCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt and cancels
carddet_work before unmapping. carddet_work can re-enable the device
interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it
again after cancelling the work.
This issue was found by an in-house static analysis tool and confirmed by
manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will traverse or modify these corrupted lists, triggering
a slab use afterfree.
KASAN report showing the vulnerability when reproducing via debugfs:
BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc
Write of size 8 at addr fff000000d43f748 by task sh/1
...
Call trace:
kasan_report+0xac/0xfc
path_find+0x6f8/0xcfc
icc_get+0x148/0x380
icc_get_set+0xf8/0x2d0
...
Freed by task 1:
kfree+0x1a0/0x4a4
icc_get+0x2cc/0x380
icc_get_set+0xf8/0x2d0
Fix this by replacing kfree(path) with the proper teardown function,
icc_put(path), which safely removes the requests from the req_list using
hlist_del() and drops the provider usage references before freeing the
memory.
Additionally, in icc_get(), ensure that the icc_lock mutex is released
prior to calling icc_put(path) to avoid a deadlock, as icc_put()
internally acquires the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
if (dev->priv_destructor)
dev->priv_destructor(dev); /* slip_devs[i] = NULL */
if (dev->needs_free_netdev)
free_netdev(dev);
...
/* Free network device */
kobject_put(&dev->dev.kobj);
So rtnl_lock() does not serialise slip_open() against the teardown at
all. sl_sync() can load slip_devs[i] while the entry is still published
and dereference it after netdev_run_todo() has run the destructor and
released the device:
CPU0 (slip_open) CPU1 (slip_close)
unregister_netdev()
rtnl_unlock()
netdev_run_todo()
__rtnl_unlock()
rtnl_lock()
sl_sync()
dev = slip_devs[i]
priv_destructor(dev)
slip_devs[i] = NULL
kobject_put(&dev->dev.kobj)
/* dev is freed */
sl = netdev_priv(dev)
if (sl->tty || sl->leased) /* use-after-free */
BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline]
BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506
CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
sl_sync drivers/net/slip/slip.c:730 [inline]
slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
tiocsetd drivers/tty/tty_io.c:2428 [inline]
tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712
Allocated by task 6502:
alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719
sl_alloc drivers/net/slip/slip.c:756 [inline]
slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
Freed by task 6497:
device_release+0xa2/0x240 drivers/base/core.c:2507
kobject_put+0x179/0x280 lib/kobject.c:729
netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509
slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906
tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456
tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614
tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782
tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860
Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed
a different source of stale entries - a device left in slip_devs[] after
slip_open() freed it on the registration error path - and does not
address this race, which is why the report survives it.
Drop the entry from ndo_uninit instead. unregister_netdevice() calls
ndo_uninit under RTNL, before the device is queued to netdev_run_todo(),
so an entry that sl_sync() can still see while holding RTNL belongs to a
device that cannot be freed until RTNL is dropped. sl_free_netdev()
stays only for the slip_open() error path, where register_netdevice()
may have failed before ndo_init and ndo_uninit is then not called
either. Both running for the same device is harmless: the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix flow mask use-after-free on flow deletion
The commit in the Fixes tag below made so flow->mask free is scheduled
via RCU right after it is removed from the flow table. The pointer
stays in the flow structure and it can be accessible while in the same
RCU critical section. This is done to avoid requiring ovs_mutex for
the ovs_flow_free().
However, while removing the flow during processing of CMD_DEL, we do
not take RCU read lock before the removal, and ovs_flow_cmd_fill_info()
uses the flow->mask pointer afterwards. The RCU read lock is taken,
but it's already late at that point. The comment on that line
acknowledges that the lock is cosmetic and doesn't serve a real purpose.
This leads to use-after-free if the RCU grace period passes between
removal and the filling. It is a short race window, but it is there
and can lead to a real crash in case memory allocation for the info
takes a bit longer:
BUG: KASAN: slab-use-after-free in __ovs_nla_put_key
net/openvswitch/flow_netlink.c:1996
BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30
net/openvswitch/flow_netlink.c:2250
Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487
Call Trace:
<TASK>
__ovs_nla_put_key net/openvswitch/flow_netlink.c:1996
ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250
ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930
ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
</TASK>
Allocated by task 9487:
mask_alloc net/openvswitch/flow_table.c:967
flow_mask_insert net/openvswitch/flow_table.c:1012
ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084
ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
Freed by task 9485:
rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645
rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622
...
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062
ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info()
to avoid this race. This also helps with cleaning up the forced cast
and the cosmetic RCU read lock. Before the commit in the Fixes tag the
order did not matter as long as the flow object itself was not freed.
A wider RCU critical section could be another option, but we have a
GFP_KERNEL allocation in the way.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free in smc_rx_pipe_buf_release()
smc_rx_splice() hands RMB pages to a pipe and takes a socket reference
per entry so the smc_sock stays alive until the reader finishes. The
connection does not: a concurrent close runs smc_conn_free(), which
releases the receive buffer back to the link group pool.
smc_rx_pipe_buf_release() tests sk_state before taking the socket lock.
The state can change between the test and the lock, and
smc_rx_update_cons() then dereferences conn->rmb_desc and walks
conn->lgr, which smc_conn_free() has already released. On the
is_reg_err path smcr_buf_unuse() frees the descriptor outright, so
this is a use-after-free.
Take the socket lock first and test conn->freed instead.
smc_conn_free() sets that flag before releasing anything, and every
caller holds the socket lock. The two paths exclude each other: either
the pipe release runs first with everything valid, or it sees the flag
and skips the update. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: unregister the connection before draining the rx tasklet
smc_conn_free() calls smc_ism_unset_conn() only while the link group is
still on its device list, and never sets conn->killed.
smc_lgr_terminate_sched() unlinks the group immediately and defers killing
its connections to a work item, so a connection freed in that window keeps
its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the
device can re-arm the receive tasklet after tasklet_kill() has returned. On
the DMB-nocopy path the ghost send buffer is freed right after that drain,
so the re-armed tasklet dereferences it.
Unregister unconditionally and drain before the detach at both teardown
sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain.
Clear conn->sndbuf_desc before freeing it as well, so a reader that samples
the pointer cannot get one that is already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't touch shared zerocopy state in skb_tx_error()
skb_tx_error() completes the zerocopy uarg and clears
SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears
SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone
shares, while the caller only owns the reference it is about to drop.
Through a clone it tells the producer its pages are free and drops
SKBFL_SHARED_FRAG for an skb that is still in flight.
Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC:
clone_execute() sends a skb_clone() into ovs_dp_process_packet() while
do_execute_actions() keeps forwarding the original, and skb_clone()
does not privatise the frags here -- skb_orphan_frags() returns early
on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker
from the packet still being forwarded, and a later local ESP delivery
decrypts in place over frags it does not own privately.
Skip it for a cloned skb. Nothing is lost: skb_release_data() clears
the zerocopy state once the last reference to the shared data goes. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: clear the URB pointers on disconnect
bcd2000_free_usb_related_resources() frees both URBs and leaves the
pointers behind:
usb_kill_urb(bcd2k->midi_out_urb);
usb_kill_urb(bcd2k->midi_in_urb);
usb_free_urb(bcd2k->midi_out_urb);
usb_free_urb(bcd2k->midi_in_urb);
The rawmidi device outlives that call. A substream that is still open
when the device is unplugged reaches bcd2000_midi_send() from the
trigger path on close. That function writes to the freed URB and then
hands it to the USB core:
bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE;
...
ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC);
usb_kill_urb() does not stop a later submission either, so a submit that
races the disconnect can requeue the URB after it has been reaped.
midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits
it from the completion handler.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000]
Write of size 4 at addr ffff00001827d388 by task bpoc/168
__asan_store4
bcd2000_midi_send [snd_bcd2000]
bcd2000_midi_output_trigger [snd_bcd2000]
snd_rawmidi_kernel_write1
close_substream.part.0
Freed by task 168:
usb_free_urb
bcd2000_disconnect [snd_bcd2000]
BUG: KASAN: slab-use-after-free in usb_submit_urb
Read of size 8 at addr ffff00001827d3b8 by task bpoc/168
Clear both pointers after freeing and test them on the paths that can
still run. Poison the URBs before freeing them: usb_poison_urb() waits
for a running completion handler and rejects any later submission, so
after it returns the input path is quiesced and only the rawmidi trigger
path can still reach bcd2000_midi_send(). No unpoison is needed; the
URBs are freed on the next line.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix info leak and UAF in device unregister path
i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before
calling device_unregister(). During device_unregister(),
device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while
the device descriptor is still expected to be valid. As a result,
i3c_device_uevent() and a racing modalias_show() can observe a NULL
desc and fall back to an uninitialized stack struct i3c_device_info,
leaking kernel stack contents in the generated modalias. Driver
.remove() callbacks may also encounter an unexpected NULL desc during
unbind.
Keep desc valid until device_unregister() has completed. Since
device_unregister() drops the device reference and may free the device,
take an extra reference with get_device() before unregistering. Clear
desc afterwards and release the extra reference with put_device().
This preserves the release-time invariant that desc must be NULL while
avoiding both the information leak and a potential use-after-free from
writing desc after the device has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: fix cred UAF in smack_file_send_sigiotask()
When inspecting the credentials of another task, objective credentials
(->real_cred, accessed with __task_cred()) must always be used.
Accessing ->cred on a non-current task is forbidden unless that task is
being created or destroyed; a task is allowed to change its own ->cred
pointer with no synchronization, and changing ->cred should only affect the
current syscall.
smack_file_send_sigiotask() was accessing both sets of credentials: First
tsk->cred, then __task_cred(tsk).
Fix it, always access the objective credentials here.
I have tested that this bug can lead to a KASAN-reported UAF of struct cred
in smack_file_send_sigiotask(), and that this fix prevents the race. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix unlocked writing to ICOSQ
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd
WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...]
[...]
Call Trace:
<IRQ>
mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core]
__napi_poll+0x30/0x200
? skb_defer_free_flush+0x9c/0xc0
net_rx_action+0x2fe/0x3f0
handle_softirqs+0xd8/0x340
__irq_exit_rcu+0xbc/0xe0
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
[...]
---[ end trace 0000000000000000 ]---
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4,
opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2
WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64
00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02
00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02
00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02
00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4,
opcode 0xd, syndrome 0x5, vendor syndrome 0xf9
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable reconnect error path file lifetime
After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes
the same ksmbd_file into the session volatile-id table. If smb2_open()
then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp)
and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp).
In this case fp and dh_info.fp are the same object. The first put drops the
reconnect lookup reference, but the final durable put can run
__ksmbd_close_fd(NULL, fp). Because the final close is not session-aware,
it can free the file object without removing the volatile-id entry that was
just published into the session table.
Use the session-aware put for the final reconnect drop when the reconnect
had already succeeded and the error path is cleaning up the republished
file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep
using the durable-only put path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix potential race in tcp_v6_syn_recv_sock()
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has
successfully called request_irq, the error handling jumps directly to
out_pit_clocksource_unregister without freeing the registered IRQ.
This leaks the IRQ line and, since kfree(pit) follows, leaves a
dangling pointer registered as the interrupt handler's dev_id,
potentially leading to a use-after-free if the IRQ fires afterwards.
Fix it by calling pit_clockevent_per_cpu_exit to properly release the
IRQ before falling through to the existing cleanup chain. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: devres: fix race between concurrent revokers
There is a potential race condition when two paths try to revoke a
Devres concurrently.
The driver core's devres_release_all() calls Revocable::revoke() via the
release callback, while Devres::drop() calls revoke_nosync() on another
CPU.
The revoker that does not claim the is_available swap returns
immediately, but the revoker that did may still be executing
drop_in_place() on the inner data. This can cause a use-after-free when
the other revoker's caller proceeds to drop adjacent resources that
drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with
SGTable freeing the backing sg_table and pages).
Fix this by adding a Completion. The release callback signals the
Completion after revoke() finishes, and Devres::drop() waits for it when
it loses the is_available swap. This ensures the wrapped object is fully
torn down before Devres::drop() returns. |
