| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate assoc response length before status and IE access
cfg80211_rx_assoc_resp() initialises the status and response-IE fields
of cfg80211_connect_resp_params from the management frame before
proving that the frame is long enough for those offsets. S1G and
regular association responses also have different IE offsets, but the
S1G path only patched resp_ie after the unsafe initialiser had already
run.
Defer resp_ie, resp_ie_len, and status to after the link-iteration
loop. Use a bool to remember whether the frame is S1G, then validate
the appropriate minimum length and set all three fields in a single
if/else block. Funnel short-frame and SME-reject cleanup through a
shared free_bss label for the abandon paths. |
| OpenClaw (npm package `openclaw`) before 2026.8.1 does not neutralize leading characters that spreadsheet applications interpret as formulas when the Control UI exports session data to CSV. Although session labels were quoted as CSV text, a lower-trust participant who can influence a session label or the first user message can place a formula-like cell in the Usage export; if an operator opens that export in a spreadsheet application with formula evaluation enabled, the cell may be evaluated with the permissions of the spreadsheet user. OpenClaw itself does not evaluate the formula, and practical impact depends on the spreadsheet application's security settings. The issue is fixed in 2026.8.1. |
| In the Linux kernel, the following vulnerability has been resolved:
of: fix out-of-bounds read in of_alias_scan() stem parser
The stem parser tests isdigit(*(end - 1)) before checking end > start
and so reads one byte before the property name when the name is empty
or all digits. Check the bound first. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate sta_id in BA window status notif
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Refactor and fix init_config access
Existing code accesses enties found in ->init_configs array through
indexes that are part of ->config_ids array. Those two are limited by:
->num_init_configs and ->num_config_ids respectively. Using ID larger
or equal to ->num_init_configs leads to out-of-bounds access:
avs_path_module_send_init_configs()
loop:
(...) &acomp->tplg->init_configs[ids[i]]
^ out-of-bounds candidate
Rather than adding another if-statement, refactor the code. There is no
need to store the IDs, have a list of pointers to actual config-entries
instead. As the verification of ->init_config entries does not differ from
verification of other types that are part of the topology.c file, simply
reuse the code. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate INODE_REF's namelen
[BUG]
A crafted btrfs image can trigger the following crash:
BUG: unable to handle page fault for address: ffffd1dc42884000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:memcpy+0xc/0x10
Call Trace:
<TASK>
read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
reconnect_path+0x165/0x390
exportfs_decode_fh_raw+0x337/0x400
? drop_caches_sysctl_handler+0xb0/0xb0
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:memcpy+0xc/0x10
Kernel panic - not syncing: Fatal exception
[CAUSE]
TThe crafted image has the following corrupted INODE_REF item:
item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106
index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000
The itemsize matches the namelen, but the namelen is 4096, way larger
than normal name length limit (BTRFS_NAME_LEN, 255).
Meanwhile the memory of the @name is only 255 byte sized, this will cause
out-of-boundary access, and cause the above crash.
[FIX]
Add extra namelen verification for INODE_REF, just like what we have
done in ROOT_REF checks.
Now the crafted image can be rejected gracefully:
BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255]
BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2
[ Rebase, add a Link: tag, add an simple cause analyze ] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate inline dentry name lengths before conversion
Inline dentry conversion copies names out of the inline dentry area
before checking that each recorded name length fits in the available
filename slots.
A corrupted image can therefore make the conversion path read past
the inline filename storage while building the regular dentry block.
Validate each inline dentry name length against the inline filename
area before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: harden FRU PIA parsing with bounded helpers
Replace the open-coded TLV walk with fru_pia_advance()
and fru_pia_copy_field() helpers that bound every read
by the actual EEPROM data length, preventing out-of-bounds
reads on truncated or malformed FRU data. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate index entry key bounds
[BUG]
A malformed NTFS directory index entry can advertise a key_size larger
than the bytes actually present in its NTFS_DE payload. Directory lookup
then passes that malformed key to cmp_fnames(), which can read past the
end of the kmalloc'ed index buffer.
BUG: KASAN: slab-out-of-bounds in fname_full_size fs/ntfs3/ntfs.h:590 [inline]
BUG: KASAN: slab-out-of-bounds in cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46
Read of size 1 at addr ffff88801c313018 by task syz.6.3365/9279
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
__asan_report_load1_noabort+0x14/0x30 mm/kasan/report_generic.c:378
fname_full_size fs/ntfs3/ntfs.h:590 [inline]
cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46
hdr_find_e.isra.0+0x3ed/0x670 fs/ntfs3/index.c:762
indx_find+0x4b5/0x900 fs/ntfs3/index.c:1186
dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254
ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85
__lookup_slow+0x241/0x450 fs/namei.c:1816
lookup_slow fs/namei.c:1833 [inline]
walk_component+0x31c/0x570 fs/namei.c:2151
link_path_walk+0x592/0xd60 fs/namei.c:2519
path_lookupat+0x138/0x660 fs/namei.c:2675
filename_lookup+0x1f3/0x560 fs/namei.c:2705
filename_setxattr+0xad/0x1c0 fs/xattr.c:660
path_setxattrat+0x1d8/0x280 fs/xattr.c:713
__do_sys_lsetxattr fs/xattr.c:754 [inline]
__se_sys_lsetxattr fs/xattr.c:750 [inline]
__x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750
...
Allocated by task 9279:
kasan_save_stack+0x39/0x70 mm/kasan/common.c:56
kasan_save_track+0x14/0x40 mm/kasan/common.c:77
kasan_save_alloc_info+0x37/0x60 mm/kasan/generic.c:573
poison_kmalloc_redzone mm/kasan/common.c:400 [inline]
__kasan_kmalloc+0xc3/0xd0 mm/kasan/common.c:417
kasan_kmalloc include/linux/kasan.h:262 [inline]
__do_kmalloc_node mm/slub.c:5650 [inline]
__kmalloc_noprof+0x2bd/0x900 mm/slub.c:5662
kmalloc_noprof include/linux/slab.h:961 [inline]
indx_read+0x41d/0xad0 fs/ntfs3/index.c:1059
indx_find+0x447/0x900 fs/ntfs3/index.c:1179
dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254
ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85
__lookup_slow+0x241/0x450 fs/namei.c:1816
lookup_slow fs/namei.c:1833 [inline]
walk_component+0x31c/0x570 fs/namei.c:2151
link_path_walk+0x592/0xd60 fs/namei.c:2519
path_lookupat+0x138/0x660 fs/namei.c:2675
filename_lookup+0x1f3/0x560 fs/namei.c:2705
filename_setxattr+0xad/0x1c0 fs/xattr.c:660
path_setxattrat+0x1d8/0x280 fs/xattr.c:713
__do_sys_lsetxattr fs/xattr.c:754 [inline]
__se_sys_lsetxattr fs/xattr.c:750 [inline]
__x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750
...
[CAUSE]
The index-header validators only validated INDEX_HDR-level geometry.
They did not walk each NTFS_DE to verify entry alignment, subnode
layout, or that key_size fit inside the entry payload. They also
allowed a last sentinel entry to carry a non-zero key_size.
[FIX]
Walk every NTFS_DE in ntfs3's index-header validators and reject
entries with invalid layout, mismatched subnode state, oversized
key_size, or non-zero sentinel keys before lookup or log replay can
consume them. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources()
Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent
buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate AV1 tile counts
The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop
bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[]
arrays, as the divisor for context_update_tile_id, and their product
bounds the per-tile descriptor buffers, but std_validate_compound() does
not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose
tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose
product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the
consuming driver so the zero-initialised control that existing userspace
submits is still accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF
ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed
by the subvolume name. Several readers assume that this layout is already
valid and then use the on-disk name length directly. A corrupted item can
therefore make those readers address bytes outside the item, and
BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI
name buffer.
Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader
uses them. Reject records that do not contain a non-empty name, whose
name_len does not exactly describe the remaining item payload, or whose
name exceeds BTRFS_NAME_LEN.
For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len
instead of deriving the copy length from the item size. The ioctl result is
zeroed when allocated. That leaves the existing trailing zero byte
untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: validate FDP configuration descriptor sizes
Validate descriptor sizes while walking the FDP configurations log so
dsze == 0 or a descriptor past the log end cannot cause unbounded
iteration or reads past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
The bounds check in ntfs_dir_emit() compares fname->name_len (a
character count) against e->size (a byte count) without accounting
for the 2-byte-per-character UTF-16LE encoding or the ATTR_FILE_NAME
header size:
if (fname->name_len + sizeof(struct NTFS_DE) > le16_to_cpu(e->size))
This computes: name_len + 16 > e_size
The correct check must account for the ATTR_FILE_NAME header (66 bytes
before the name) and the UTF-16LE character size (2 bytes each):
sizeof(NTFS_DE) + offsetof(ATTR_FILE_NAME, name) +
name_len * sizeof(short) > e_size
Which computes: 16 + 66 + name_len * 2 > e_size
The correct calculation already exists as fname_full_size() in ntfs.h
and is used in cmp_fnames(), namei.c, and fslog.c, but was not used
in the readdir path.
A crafted NTFS image with an index entry containing a small e->size
but large fname->name_len bypasses the current check, causing
ntfs_utf16_to_nls() to read past the entry boundary.
Additionally, add a key_size validation in hdr_find_e() to ensure the
declared key_size does not exceed the available entry data, preventing
comparison functions from reading past entry boundaries on the lookup
path. |
| Lantronix SLC8000/SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain a stack-based buffer overflow vulnerability that allows authenticated attackers to potentially execute arbitrary code by exploiting an undocumented mfc eeprom read command that copies unbounded user input into a bounded stack buffer before passing it to a system() call. Attackers can authenticate as any user to the terminal or CLI interface and supply an oversized input to trigger the overflow, potentially achieving complete loss of confidentiality, integrity, and availability on the affected device and impacting downstream serial-attached devices. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity
rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry
array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows
entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info
buffer, and programs the real tile_cols / tile_rows into the hardware.
The tile group entry control is a dynamic array sized to the number of
entries userspace submitted, independent of tile_cols / tile_rows, so a
frame that claims more tiles than entries reads past the array. A frame
that claims more than AV1_MAX_TILES tiles also leaves the hardware
programmed for more tiles than the descriptor buffer holds.
Reject both in prepare_run(): tile_cols * tile_rows must not exceed the
submitted entry count or AV1_MAX_TILES. The entry count is read via
v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1
decoder already enforces. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whose vendor_id matches the
host, triggering out-of-bounds heap reads (KASAN-detectable, and able to
mis-select a command or panic).
Add a central guard in qla2x00_process_vendor_specific() so the selector
is always in bounds, restrict the early vendor_cmd[0] read in
qla24xx_bsg_request() to sufficiently long vendor messages, and add
request_len checks to the sub-handlers that read further:
qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(),
qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(),
qla2x00_update_optrom(), qlafx00_mgmt_cmd() and
qla28xx_validate_flash_image(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr->packet_len in the driver before calling
btintel_pcie_submit_rx_work(). |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_console: do not free control-out buffers on remove
__send_control_msg() publishes &portdev->cpkt as the control-out
virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover
cookies to free_buf(), which treats them as struct port_buffer and
reads sgpages.
If a control message is still on c_ovq when the device is unbound,
free_buf() reads past the ports_device object.
KASAN reported slab-out-of-bounds in free_buf():
free_buf
remove_vqs
virtcons_remove
unbind_store
The object was the ports_device allocated in virtcons_probe().
Drain c_ovq without freeing. The packet lives in portdev and is released
with it. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject out-of-bounds DataOffset in CIFSSMBRead()
The SMB1 synchronous read helper CIFSSMBRead() validates the server's
DataLength against CIFSMaxBufSize and the caller's count, but never
validates DataOffset. The copy source is formed as
&pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset)
and memcpy()'d for DataLength bytes with no check that the
[DataOffset, DataOffset + DataLength) range lies within the response
actually received from the server.
A malicious or compromised SMB1 server can return a response carrying
an in-range DataLength and a large DataOffset, driving the source
pointer past the end of the response buffer. The memcpy() then copies
adjacent kernel heap into the caller's read buffer (information
disclosure), or reads unmapped memory and oopses (denial of service).
SMB1 is not negotiated by default; reaching this code requires an
explicit vers=1.0 mount.
Both DataOffset and the received response length recorded in
rsp_iov.iov_len are relative to the start of the SMB header, so reject
the response unless DataOffset + DataLength fits within that length,
using overflow-safe arithmetic, before forming the source pointer.
The response length has been validated by the previous patch, so the
DataOffset and DataLength fields can be read safely here.
While here, make data_length unsigned. It holds a length derived from
unsigned on-the-wire fields and is only ever compared against unsigned
quantities; print it with %u accordingly, and add __func__ to the
cifs_dbg() calls in this function. |
