| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp
rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the
IB_QP_STATE path, so it holds no state_lock and runs while the responder
task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting
only that attribute calls free_rd_atomic_resources() then
alloc_rd_atomic_resources(), swapping qp->resp.resources[] while
rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources()
also leaves the cached pointer qp->resp.res dangling. A local
unprivileged user can race the free/realloc into a use-after-free in
rxe_receiver() (local DoS).
Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(),
as rxe_qp_reset() already does when tearing this array down, re-enabling
only after alloc_rd_atomic_resources() succeeds so the responder never
resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear
qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c
completion paths.
Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. |
| In specific scenarios involving multiple clients with different DNS resolver configurations, Reactor Netty may incorrectly reuse a previously configured DNS resolver.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| Relative path traversal in Microsoft Fabric allows an authorized attacker to elevate privileges over a network. |
| In specific scenarios, the Reactor Netty HTTP Server may leak exception details across unrelated requests. In order for this to happen, the server must be configured with Brave Tracing.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| In specific scenarios involving WebSocket handshake redirects to a different origin, the Reactor Netty WebSocket client may leak credentials. In order for this to happen, the HTTP client must have been explicitly configured to follow redirects.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| Integer overflow or wraparound in Azure Data Manager for Energy allows an authorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: run set info with opener credentials
SMB2 SET_INFO handlers call path-based VFS helpers after checking the
access mask granted to the SMB handle. Those helpers perform their owner,
inode permission and LSM checks using the current ksmbd worker credentials.
Run the complete SET_INFO dispatch with the credentials captured when the
handle was opened. This also removes the separate security information
credential setup and keeps all SET_INFO classes under one credential scope.
Direct override_creds() is used because it can nest with the request
credential overrides already used by rename and link helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for delete-on-close
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for ADS I/O
Alternate data streams are stored as xattrs. Unlike regular file I/O,
their read and write paths therefore call VFS xattr helpers which recheck
inode permissions and LSM policy using the current task credentials.
Run ADS I/O with the credentials captured when the SMB handle was opened. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: track the connection owning a byte-range lock
SMB2_LOCK adds each granted byte-range lock to both the file lock list
and the lock list of the connection which handled the request. The
final close and durable handle paths, however, remove the connection
list entry while holding fp->conn->llist_lock.
With SMB3 multichannel, the connection handling the LOCK request can be
different from the connection which opened the file. The entry can
therefore be removed under a different spinlock from the one protecting
the list it belongs to. A concurrent traversal can then access freed
struct ksmbd_lock and struct file_lock objects.
Record the connection owning each lock's clist entry and hold a
reference to it while the entry is linked. Use that connection and its
llist_lock for unlock, rollback, close, and durable preserve. Durable
reconnect assigns the new connection as the owner when publishing the
locks again. |
| In specific scenarios, Reactor Netty HTTP Server may incorrectly evaluate the remote IP address when HAProxy Protocol is enabled. In order for this to happen, the application must be configured to use HAProxy Protocol.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate NTLMv2 response before updating session key
ksmbd_auth_ntlmv2() derives the NTLMv2 session key into
sess->sess_key before it verifies the NTLMv2 response.
ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even
when ksmbd_auth_ntlmv2() failed.
With SMB3 multichannel binding, the failed authentication operates on
an existing session and the session setup error path does not expire
binding sessions. A client can send a binding session setup with a
bad NT proof and KEY_XCH and still modify sess->sess_key before
STATUS_LOGON_FAILURE is returned.
Relevant path:
smb2_sess_setup()
-> conn->binding = true
-> ntlm_authenticate()
-> session_user()
-> ksmbd_decode_ntlmssp_auth_blob()
-> ksmbd_auth_ntlmv2()
-> calc_ntlmv2_hash()
-> hmac_md5_usingrawkey(..., sess->sess_key)
-> crypto_memneq() returns mismatch
-> KEY_XCH arc4_crypt(..., sess->sess_key, ...)
-> out_err without expiring the binding session
Derive the base session key into a local buffer and copy it to
sess->sess_key only after the proof matches. Return immediately on
authentication failure so KEY_XCH is only processed after successful
authentication. |
| Type confusion in V8 in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb
mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB
header onto every skb and assumes the headroom for them is already
there. That holds for locally generated traffic, where mac80211
reserves hw->extra_tx_headroom, but forwarded frames are sent through
ieee80211_8023_xmit(), which does not reserve it. Bridge a wired
interface to an mt7925u AP and the first forwarded frame that arrives
short panics the kernel:
skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1
kernel BUG at net/core/skbuff.c:212!
Call trace:
skb_panic+0x58/0x60 (P)
skb_push+0x58/0x60
mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common]
mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb]
__mt76_tx_queue_skb+0x54/0xe8 [mt76]
mt76_txq_schedule.part.0+0x204/0x478 [mt76]
mt76_txq_schedule_all+0x50/0x80 [mt76]
mt792x_tx_worker+0x68/0x100 [mt792x_lib]
__mt76_worker_fn+0x84/0x150 [mt76]
Whether a given setup hits it depends on how much headroom the ingress
netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging
onboard ethernet to a Netgear A9000; originally reported on an MT7986
router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet),
which leaves more headroom, helped narrow the trigger to the ingress
path.
The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76:
mt7921: don't assume adequate headroom for SDIO headers"), but mt7925
was copied from mt7921 without the fix. Add the same guard here. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
When TD creation fails for the last packet of an isochronous URB,
c67x00_add_iso_urb() gives the URB back before updating the endpoint
scheduling state.
c67x00_giveback_urb() frees the URB private data, and the completion
callback may release the final URB reference. The following accesses to
urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed
memory.
Update next_frame and cnt before giving back the failed final packet,
making the giveback the last operation that uses the URB and its private
data. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: option: fix slab OOB read in interrupt URB callback
The interrupt URB buffer is allocated in setup_port_interrupt_in() based
on the endpoint's wMaxPacketSize:
buffer_size = usb_endpoint_maxp(epd);
port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
When a USB device declares wMaxPacketSize = 8 on its interrupt IN
endpoint, the buffer is allocated from kmalloc-8 cache (exactly
8 bytes).
If the device sends a short packet (actual_length < wMaxPacketSize),
the URB completes with status == 0 and the callback proceeds to read:
data[sizeof(struct usb_ctrlrequest)]
which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte
buffer. This results in a slab out-of-bounds read.
Fix this by adding the missing bounds check: first verify that the
actual length is large enough to contain the struct usb_ctrlrequest
header before accessing req_pkt->bRequestType and req_pkt->bRequest,
and then verify that there is an additional byte for the modem signal
state before reading data[sizeof(struct usb_ctrlrequest)] inside the
conditional. Use sizeof(*req_pkt) instead of sizeof(struct
usb_ctrlrequest) for consistency.
[ johan: use dev_err(); split signals declaration and initialisation ] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output()
snd_usbmidi_novation_output() lays out a two-byte header at
transfer_buffer[0..1] and passes &transfer_buffer[2] together with a
length of ep->max_transfer - 2 to snd_rawmidi_transmit():
count = snd_rawmidi_transmit(ep->ports[0].substream,
&transfer_buffer[2],
ep->max_transfer - 2);
ep->max_transfer comes from the output endpoint's wMaxPacketSize via
usb_maxpacket(). A malformed or malicious device can advertise a bulk
OUT endpoint with a wMaxPacketSize of 1 - the USB core only clamps this
value downwards - so ep->max_transfer becomes 1 and the count argument
becomes -1.
snd_rawmidi_transmit() passes the negative count on to
__snd_rawmidi_transmit_peek(), where "if (count1 > count) count1 = count"
leaves count1 negative; get_aligned_size() keeps it negative for a
byte-stream substream, so the following memcpy(buffer, ..., count1) runs
with a (size_t)-1 length and writes far past the transfer buffer, which
was allocated with usb_alloc_coherent(ep->max_transfer).
This is the same class of bug that was fixed for snd_usbmidi_akai_output()
in commit 0970274613fb ("ALSA: usb-audio: fix OOB write in
snd_usbmidi_akai_output()"); the novation output routine was left
unguarded. Bail out when the endpoint cannot hold the two-byte header
plus at least one payload byte. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: Add lock to usb_wakeup_notification()
Add a spin lock to usb_wakeup notification to prevent a race condition
with dereferencing freed memory. This could be hit by the xHCI driver as
it calls this function from an IRQ and could race with the
hub_disconnect() function, which properly grabs this lock to protect the
state of the device. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - fix source scatterlist length access
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead. |
