| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src()
When removing a source filter whose count reaches zero, ip6_mc_del1_src()
unlinks psf from pmc->mca_sources. If the filter was previously active,
the code moved psf directly into pmc->mca_tomb by updating psf->sf_next.
Because pmc->mca_sources is traversed locklessly under RCU (e.g. by
ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period
elapses diverts concurrent readers to the tombstone list. Consequently,
readers miss remaining active sources in pmc->mca_sources and improperly
examine deleted tombstone entries.
Fix this by allocating a new tombstone node for pmc->mca_tomb (as done
in sf_setstate()) and retiring the original psf via kfree_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: don't downgrade half-dead scalar zero spills to STACK_ZERO
states.c:__clean_func_state() can downgrade scalar zero spill to
STACK_ZERO in the following case:
*(u64 *)(r10 - 8) = 0;
... checkpoint ...
r1 = *(u32 *)(r10 - 4);
... no reads from r10-8 ...
Here 4 bytes at r10-8 are dead and verifier changes scalar spill to a
combination: 0000pppp (p stands for poison). Such a change breaks
precision propagation chains. All places that produce STACK_ZERO
should call bpf_mark_chain_precision() for the zero source.
This patch fixes the bug in a simplest way possible:
avoids converting stack spills of zero to STACK_ZERO.
Two smarter approaches are possible:
- do bpf_mark_chain_precision() from __clean_func_state()
- check slot liveness information in check_stack_write_fixed_off()
I investigated both and the changes required are a bit tricky,
hence go with a simple fix for the time being. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound $AttrDef table walk to the loaded table size
ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the
loop condition bounds only the start of each entry, not the whole entry:
for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef <
vol->attrdef_size && ad->type; ++ad)
struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and
the loop body reads further fields. vol->attrdef is kvzalloc(i_size),
where i_size is the on-disk $AttrDef data size, checked in
load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose
$AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the
read of ad->type run past the allocation. Creating a file reaches this
through ntfs_attr_size_bounds_check() and reads out of bounds:
BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0
Read of size 4 at addr ffff888005833280 by task init/1
ntfs_attr_find_in_attrdef
ntfs_attr_size_bounds_check
ntfs_attr_can_be_non_resident
ntfs_attr_add
Require the whole entry to lie within attrdef_size in the loop guard, and
reject at mount a $AttrDef too small to hold one attr_def entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: treat any nonzero dio zero-range return as an error
ntfs_dio_zero_range() returns either 0 or a negative errno from
blkdev_issue_zeroout(); it never returns a positive value. The
zeroing failure check in ntfs_attr_fallocate() therefore never fired,
so a failed zeroing operation was silently ignored: the loop kept
going, the newly allocated clusters were folded into initialized_size
and the write could succeed leaving stale on-disk data.
Treat any nonzero return as an error and abort the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: propagate reparse index insertion failure
update_reparse_data() ignores the return value of
set_reparse_index(). When index insertion fails, the code removes
the just-written reparse data as cleanup but still returns 0, so
symlink(2) (and WSL special file creation) reports success while
no reparse data exists on disk. When there was no previous reparse
data (oldsize == 0), the failure was likewise silently ignored.
Propagate the error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject a command chain that carries no commands
A chain whose command_count is zero passes the payload length check,
because struct_size(payload, data, 0) is just the header. The fill loop
then does not run, so offset stays zero and the request is submitted with
a zero-length buffer.
On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since
op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers
MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers
MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission
continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte
before the buffer and faults on the vmap guard page. EXEC_CMD is
reachable by any process that can open the render node.
Reject the request instead. |
| Substance3D - Modeler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Modeler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Modeler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Modeler is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. |
| A flaw was found in Undertow. A remote attacker can cause Out of Memory on websockets endpoint without authentication on any @ServerEndpoint class that has any @OnMessage method. This allows an attacker to cause Denial of Service attack without authentication and using only a standard WebSocket handshake. |
| A flaw was found in EAP's IIOP. The listener's NameService would accept bind operations without authentication, allowing an attacker to hijack JNDI lookups and binding them to a malicious ORB, achieving MITM or DoS on further invocations. |
| A flaw was found in EAP's jboss-remoting. A remote unauthenticated attacker who can reach :8080 (or :9990, or :4447) and complete an Upgrade: jboss-remoting handshake can cause OOM errors that degrade requests server-wide, leading to denial of service. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| when EAP runs with -secmgr, the openjdk-orb's JDKBridge honours attacker-supplied CDR codebase URLs during object unmarshalling on :3528, allowing an unauthenticated attacker to load and instantiate arbitrary classes from a remote URL in the server JVM before EJB security interceptors run. |
| A flaw was found in Picketlink's SP signature validation; a SAML response containing zero assertion elements matching the signature check can allow an attacker to forge a SAML response and auth as any principal with any roles on the protected application. |
| A flaw was found in JBoss marshalling. The Infinispan session replication path deserializes replicated session data via the JBoss Marshalling River unmarshaller with no class filtering — enabling RCE via deserialization gadget chains on every cluster node. |
