| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix slot lock bit position on big-endian 64-bit
The slot lock is a bit operation on the whole __lock word, which flags and
ac_time alias as two u32s. On little-endian the lock bit lands in the
position ZRAM_ENTRY_LOCK reserves in flags, so the aliasing works out. On
64-bit big-endian it lands in ac_time instead: with
ZRAM_TRACK_ENTRY_ACTIME enabled, storing the access time from
mark_slot_accessed() or slot_free() wipes out the held lock bit, letting
another CPU take the same slot lock; an access time value with that bit
set makes the slot look locked forever.
Shift the lock bit into the flags half of the word on big-endian 64-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: don't spin_trylock() in NMI on UP
Patch series "mm/page_alloc: fixes for free_pages_nolock() on RT/UP".
Pre-existing bugs found by Sashiko during review of this other series:
https://lore.kernel.org/all/20260703-alloc-trylock-v5-0-c87b714e19d3@google.com/
I have not reproduced these bugs, and I suspect there is no real-world
user that is affected by them.
This patch (of 2):
As noted in can_spin_trylock(), using this is unsafe in this context.
commit 620b46ed6ae17 ("mm/page_alloc: return NULL early from
alloc_frozen_pages_nolock() in NMI on UP") fixed this on the alloc side
but missed the free side.
Impact: If BPF programs using these features in NMI (probably tracing) are
present on non-SMP builds this might crash the kernel and is probably
exploitable by local attackers for privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but
dev->state is checked after acquiring the lock. Therefore a concurrent
bind can change the device state between these operations, which can
leave ioctl with a stale NULL gadget pointer and causing a NULL pointer
dereference at gadget->ops->ioctl.
Read dev->gadget while holding dev->lock so that the gadget pointer
and device state are sampled consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: cs35l33: drain threaded IRQ before runtime suspend
cs35l33_runtime_suspend() currently switches the codec into
regcache_cache_only(true) and powers it down without first quiescing the
threaded IRQ registered by devm_request_threaded_irq(). That leaves a
window where cs35l33_irq_thread() can still run after suspend has closed
off live register access.
A running system can reach this during runtime PM while the driver still
has critical fault IRQs unmasked. If the threaded handler runs in that
window, it reads volatile INT_STATUS_1/2 after cache_only has been
enabled, ignores the regmap_read() failures, and can still drive the
AMP_SHORT_RLS, CAL_ERR_RLS, OTE_RLS, and OTW_RLS release paths.
Use disable_irq() before entering cache_only/power-off so any in-flight
threaded handler is drained and no new IRQ thread can run during the
suspended state. Re-enable the IRQ only after runtime_resume() has
restored live register access with regcache_sync(). Since probe only
warns if devm_request_threaded_irq() fails, track whether the IRQ was
actually installed before disabling or re-enabling it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix division by zero in get_estimated_bw()
get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity,
which is zeroed by reset_bw_alloc_struct() and only populated once
DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled.
link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler,
calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED
is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED
has ever fired for that link. A connected USB4/DPIA tunneling device
that reports an estimated-bandwidth change before ever reporting a
capability change drives a division by zero in this IRQ path.
link_dpia_send_bw_alloc_request() already guards the same
bw_granularity division; add the identical guard here rather than
introducing a new pattern.
(cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm()
In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to
&matrix_mdev->pqap_hook before the update locks are acquired and the
mdev list is checked for a conflicting assignment. If another mdev is
already attached to the same KVM instance, the function returns -EPERM
without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook
pointing at the failing matrix_mdev instead of the mdev that legitimately
owns the KVM.
Since matrix_mdev->kvm is never set on this error path,
vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev
is later closed. If matrix_mdev is subsequently freed, any PQAP
instruction executed by the guest will dereference the stale pointer
through pqap_hook_rwsem, resulting in a use-after-free.
Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm()
function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check
for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine
whether it belongs to another mdev. This will alleviate the need to iterate
the matrix_dev->mdev_list list to see if the kvm object is assigned to
another mdev.This was introduced in v3 to alleviate the need to take the
mdevs_lock while iterating the list; however, this did not prevent a
potential race condition.
The pqap_hook_rwsem(write) is now performed inside
get_update_locks_for_kvm(), which is updated to acquire
pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering
is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem
in read mode while srcu is held under vcpu->mutex, establishing the
dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read).
The pqap_hook_rwsem is now released inside the
release_update_locks_for_kvm(), which is updated to release
pqap_hook_rwsem(write) between mdevs_lock and kvm->lock.
Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved
after release_update_locks_for_kvm(). Previously it was called while
kvm->lock was held; if it were ever the last reference, kvm_destroy_vm()
would run under kvm->lock, which would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: keep folio's objcg same as its node
memcg_reparent_objcgs() has an inherent assumption that a folio's objcg is
the objcg of the folio's node. Folio migration across nodes breaks that
assumption: the new folio simply inherits the old folio's objcg while
living on a different node.
Once the assumption is broken, the reparenting of the folio's objcg and
the reparenting of the folio's LRU list are no longer atomic.
memcg_reparent_objcgs() handles one node per iteration and drops all the
locks in between, so the objcg gets reparented in the iteration for the
objcg's node while the LRU list gets spliced in the iteration for the
folio's node. Any LRU operation on that folio in between resolves its
lruvec through the objcg, and thus takes the lru_lock of the wrong memcg,
not the lru_lock of the list the folio is actually on.
Fix this by selecting the objcg by folio_nid() at charge time, and by
re-deriving it for the destination node in mem_cgroup_migrate() and
mem_cgroup_replace_folio(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Make VNCR invalidation participate in MMU invalidation retry
A VNCR TLB invalidation can occur on one vcpu while another vcpu is
faulting in this same page. Without correctly handling this, we can
end up with the following scenario:
- vcpu A walks the PTs to translate VNCR
- before vcpu A is able to grab the MMU lock to insert the TLB,
vcpu B updates the S1 PTs with an invalid entry, and issues
a TLBI S1E2 for this VA
- vcpu A inserts the TLB for something that is now invalid
This isn't a new problem, and we manage S2 by having the MMU notifier
to bump up mmu_invalidate_seq on invalidation so that the fault can be
replayed.
We can perform something similar here, and extend invalidate_vncr_va() to
update the same counter, clearly indicating that the context has
changed under our feet. This is safe as the invalidation always happen
while holding the MMU lock for write, and that we sample the sequence
number before walking S1. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
atlas_buffer_postenable() acquires a runtime PM reference with
pm_runtime_resume_and_get() but returns the result of
atlas_set_interrupt() directly. If atlas_set_interrupt() fails,
the runtime PM reference is leaked and the device can never
autosuspend.
Add pm_runtime_put_autosuspend() on the error path to balance
the reference. |
| Race condition in Core in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| A race condition was addressed with improved locking. This issue is fixed in macOS Tahoe 26.6. A malicious app may be able to gain root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix infinite loop in pcpu_freelist push with one possible CPU
__pcpu_freelist_push() can loop forever when only one CPU is possible
and an NMI re-enters pcpu_freelist_push() while the interrupted context
holds that CPU's freelist lock.
After the current-CPU fast path fails, the fallback loop walks
cpu_possible_mask while skipping the current CPU. With CONFIG_SMP=n, or
when an SMP kernel is limited to one possible CPU with nr_cpus=1 or
possible_cpus=1, there are no other possible CPUs to examine. The loop
therefore makes no lock acquisition attempt and can never make progress.
The following stack was observed on a UP system:
NMI context:
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[perf-event BPF program]
__perf_event_overflow
perf_event_nmi_handler
exc_nmi
Interrupted context:
__pcpu_freelist_push
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[raw_tp/sys_enter BPF program]
__bpf_trace_sys_enter
do_syscall_64
raw_res_spin_lock() detects the same-CPU recursive acquisition and
returns -EDEADLK, but the subsequent fallback loop has no candidate head
on a system with one possible CPU.
Restore the extra fallback head that existed before the rqspinlock
conversion. Keep the current-CPU fast path, then try the other possible
CPUs and finally the extra head. The additional head lets a push, which
cannot fail without losing a preallocated element, make progress when the
only per-CPU head is held by the interrupted context.
Also check the extra head from the pop path so that nodes placed there
can be reused. |
| Use after free in Windows Authentication Methods allows an authorized attacker to elevate privileges locally. |
| CrowdStrike released a security update to address a vulnerability in the Falcon sensor for Windows. The vulnerability only exists when the Microsoft Office File Malicious Macro Removal Windows policy setting is enabled and customers remain protected through the Cloud Anti-malware for Microsoft Office Files settings.
An update is available immediately for versions 7.34 and above, 7.32 LTS, and 7.16 for Windows 7/2008 R2 systems. The Falcon sensor for Mac, Linux, and Legacy Systems are not affected.
This vulnerability could expose an arbitrary file write to protected locations from an unprivileged context, potentially leading to local privilege escalation.
The CrowdStrike Laroux Malware Cleanup Tool, based off of the same feature in the CrowdStrike Falcon sensor for Windows, is also affected. An update for this tool is also available immediately. |
| Zettlab D6 Ultra before 1.7.0 allows absolute path traversal to reach folders other than the personal folder. |
| Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in team-alembic AshAuthentication allows an attacker holding a leaked magic link to replay its single-use token and authenticate as the target subject. A magic link configured with single_use_token?, which is the default, is meant to be redeemable exactly once, but nothing serialises the token's validity check against its consumption, so concurrent redemptions of one token all succeed and each yields a full user token.
Sign-in verifies the JWT with Jwt.verify/4 and revokes it only afterwards: AshAuthentication.Strategy.MagicLink.SignInPreparation revokes in a Query.after_action callback, and AshAuthentication.Strategy.MagicLink.SignInChange in an after_transaction hook that runs once the sign-in has already committed. AshAuthentication.TokenResource.Actions.revoke/3 writes the revocation as an upsert, so a concurrent duplicate revocation silently succeeds instead of conflicting and no request ever loses the race.
This issue affects ash_authentication: from 3.9.0 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14. |
| Race condition in Transactions Platform in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) |
| Race condition in Extensions in Google Chrome on on Mac prior to 153.0.8010.47 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to potentially execute arbitrary code outside the sandbox via UI Interaction. (Chromium security severity: High) |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
