| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uncontrolled resource consumption for some Edge Orchestrator software before version 24.11.1 for Intel(R) Tiber(TM) Edge Platform may allow an unauthenticated user to potentially enable denial of service via local access. |
| Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates. |
| A vulnerability was found in HTACG tidy-html5 5.8.0. It has been declared as problematic. This vulnerability affects the function InsertNodeAsParent of the file src/parser.c. The manipulation leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. |
| go-ethereum (geth) is a golang execution layer implementation of the Ethereum protocol. Prior to 1.13.15, a vulnerable node can be made to consume very large amounts of memory when handling specially crafted p2p messages sent from an attacker node. The fix has been included in geth version `1.13.15` and onwards. |
| Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. The Rust implementation of the Yamux stream multiplexer uses a vector for pending frames. This vector is not bounded in length. Every time the Yamux protocol requires sending of a new frame, this frame gets appended to this vector. This can be remotely triggered in a number of ways, for example by: 1. Opening a new libp2p Identify stream. This causes the node to send its Identify message. Of course, every other protocol that causes the sending of data also works. The larger the response, the more data is enqueued. 2. Sending a Yamux Ping frame. This causes a Pong frame to be enqueued. Under normal circumstances, this queue of pending frames would be drained once they’re sent out over the network. However, the attacker can use TCP’s receive window mechanism to prevent the victim from sending out any data: By not reading from the TCP connection, the receive window will never be increased, and the victim won’t be able to send out any new data (this is how TCP implements backpressure). Once this happens, Yamux’s queue of pending frames will start growing indefinitely. The queue will only be drained once the underlying TCP connection is closed. An attacker can cause a remote node to run out of memory, which will result in the corresponding process getting terminated by the operating system.
|
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected applications do not properly release memory that is allocated when handling specifically crafted incoming packets. This could allow an unauthenticated remote attacker to cause a denial of service condition by crashing the service when it runs out of memory. The service is restarted automatically after a short time. |
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to versions 3.3.0 and 2.19.4, an attacker could present an ECDSA X.509 certificate using explicit encoding where the parameters are very large. The proof of concept used a 16Kbit prime for this purpose. When parsing, the parameter is checked to be prime, causing excessive computation. This was patched in 2.19.4 and 3.3.0 to allow the prime parameter of the elliptic curve to be at most 521 bits. No known workarounds are available. Note that support for explicit encoding of elliptic curve parameters is deprecated in Botan. |
| An issue discovered in H3C Magic R365 and H3C Magic R100 routers allows attackers to hijack TCP sessions which could lead to a denial of service. |
| Altair is a fork of Misskey v12. Affected versions lack of request validation and lack of authentication in the image proxy for compressing and resizing remote files could allow attacks that could affect availability, such as by abnormally increasing the CPU usage of the server on which this software is running or placing a heavy load on the network it is using. This issue has been fixed in v12.24Q4.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the management and VPN web servers of the Remote Access SSL VPN feature of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly stop responding, resulting in a DoS condition.
This vulnerability is due to ineffective validation of user-supplied input during the Remote Access SSL VPN authentication process. An attacker could exploit this vulnerability by sending a crafted request to the VPN service on an affected device. A successful exploit could allow the attacker to cause a DoS condition where the device stops responding to Remote Access SSL VPN authentication requests. |
| A vulnerability classified as problematic has been found in FFmpeg up to 6e26f57f672b05e7b8b052007a83aef99dc81ccb. This affects the function audio_element_obu of the file libavformat/iamf_parse.c of the component IAMF File Handler. The manipulation of the argument num_parameters leads to memory leak. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is 0526535cd58444dd264e810b2f3348b4d96cff3b. It is recommended to apply a patch to fix this issue. |
| A bug exists in the API, mesh_node_power_off(), which fails to copy the contents of the Replay Protection
List (RPL) from RAM to NVM before powering down, resulting in the ability to replay unsaved messages. Note that as of June 2024, the Gecko SDK was renamed to the Simplicity SDK, and the versioning scheme
was changed from Gecko SDK vX.Y.Z to Simplicity SDK YYYY.MM.Patch#. |
| The etcd package distributed with the Red Hat OpenStack platform has an incomplete fix for CVE-2022-41723. This issue occurs because the etcd package in the Red Hat OpenStack platform is using http://golang.org/x/net/http2 instead of the one provided by Red Hat Enterprise Linux versions, meaning it should be updated at compile time instead. |
| The etcd package distributed with the Red Hat OpenStack platform has an incomplete fix for CVE-2021-44716. This issue occurs because the etcd package in the Red Hat OpenStack platform is using http://golang.org/x/net/http2 instead of the one provided by Red Hat Enterprise Linux versions, meaning it should be updated at compile time instead. |
| A flaw was found in the Hive hibernation controller component of OpenShift Dedicated. The ClusterDeployment.hive.openshift.io/v1 resource can be created with the spec.installed field set to true, regardless of the installation status, and a positive timespan for the spec.hibernateAfter value. If a ClusterSync.hiveinternal.openshift.io/v1alpha1 resource is also created, the hive hibernation controller will enter the reconciliation loop leading to a panic when accessing a non-existing field in the ClusterDeployment’s status section, resulting in a denial of service. |
| Gladys Assistant before 4.45.1 allows Privilege Escalation (a user changing their own role) because req.body.role can be used in updateMySelf in server/api/controllers/user.controller.js. |
| Misskey is an open source, federated social media platform. In affected versions FileServerService (media proxy) in github.com/misskey-dev/misskey 2024.10.1 or earlier did not detect proxy loops, which allows remote actors to execute a self-propagating reflected/amplified distributed denial-of-service via a maliciously crafted note. FileServerService.prototype.proxyHandler did not check incoming requests are not coming from another proxy server. An attacker can execute an amplified denial-of-service by sending a nested proxy request to the server and end the request with a malicious redirect back to another nested proxy request.
Leading to unbounded recursion until the original request is timed out. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. Users unable to upgrade may configure the reverse proxy to block requests to the proxy with an empty User-Agent header or one containing Misskey/. An attacker can not effectively modify the User-Agent header without making another request to the server. |
| A vulnerability in the PROFINET stack implementation of the IndraDrive (all versions) of Bosch Rexroth allows an attacker to cause a denial of service, rendering the device unresponsive by sending arbitrary UDP messages. |
| Abacus is a highly scalable and stateless counting API. A critical goroutine leak vulnerability has been identified in the Abacus server's Server-Sent Events (SSE) implementation. The issue occurs when clients disconnect from the /stream endpoint, as the server fails to properly clean up resources and terminate associated goroutines. This leads to resource exhaustion where the server continues running but eventually stops accepting new SSE connections while maintaining high memory usage. The vulnerability specifically involves improper channel cleanup in the event handling mechanism, causing goroutines to remain blocked indefinitely. This vulnerability is fixed in 1.4.0. |
