| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba
The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified
IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba().
While doing so, the passed in argument npages is ignored and constant
value '1' is used leaving out a possible overflow as the callers can
legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT
cases.
Fix this by accounting for 'npages', checking for arithmetic overflow,
and verifying that the entire requested range (ioba - offset + npages)
does not exceed the table capacity 'size'. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: release the channel if start fails
ieee80211_join_mesh() acquires a channel context and then calls
ieee80211_start_mesh(), which can fail. In that case, the chanctx
isn't released then interface removal will attempt to unassign it
after it's removed from the driver, hitting:
wlan0: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx
ieee80211_assign_link_chanctx
__ieee80211_link_release_channel
ieee80211_link_release_channel
ieee80211_teardown_sdata
unregister_netdevice_many_notify
_cfg80211_unregister_wdev
ieee80211_remove_interfaces
ieee80211_unregister_hw
mac80211_hwsim_del_radio
hwsim_exit_net
Correctly release the channel on start failures. |
| deeptutor 1.4.0 contains an authorization bypass through a user-controlled object identifier in TurnRuntimeManager.regenerate_last_turn. A remote caller can enumerate or obtain a session_id and trigger regenerate on another user's session. |
| An issue in dormakaba evolo Service (all versions) allows a remote attacker to execute arbitrary code as SYSTEM via a .NET component. |
| An issue in geelen mcp-remote 0.1.18 through 0.1.38 allows a remote attacker to obtain sensitive information via the SSE transport eventSourceInit fetch wrapper " src/lib/utils.ts |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3
The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference"
changed the check to test for the ops pointer instead of the signaled
bit to avoid a potential NULL dereference when the ops pointer has been
cleared.
The problem is now that the ops pointer is cleared only when neither the
release nor the wait callback is implemented and this isn't true for a lot
of dma_fence implementations yet. So those implementations lost the RCU
protection after signaling of the returned string resulting in potential
use after free.
Add the signaling check additional to the ops pointer check so that we
have both the protection against NULL dereference as well as the RCU
protection after signaling for the returned string.
v2: improve comments to note RCU protection and explain why we check
both signaling state and ops pointer
v3: some comment improvements suggested by Philip |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: avoid reallocating confirmed conntrack labels
ovs_ct_get_conn_labels() adds the labels extension when a conntrack
entry does not have one. Confirmed conntracks can be read locklessly,
so adding an extension may reallocate and free the extension block
while another CPU accesses it.
Only add the extension for unconfirmed conntracks. A confirmed
conntrack without labels now fails the caller's label operation instead
of reallocating its extension storage. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: Prevent exec() race
Hyunwoo debugged the following KASAN UAF splat:
BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0
Write of size 8 at addr ffff888007ed80c8 by task poc/79
...
Call Trace:
__send_signal_locked+0xb27/0xba0
do_send_sig_info+0xa7/0x160
do_send_specific+0x76/0xa0
__x64_sys_tgkill+0x193/0x270
...
Allocated by task 80:
do_timer_create+0x1a4/0x1030
__x64_sys_timer_create+0x145/0x190
...
Freed by task 12:
kmem_cache_free_bulk+0x1f8/0x4a0
kvfree_rcu_bulk+0x14f/0x1c0
kfree_rcu_work+0x128/0x1a0
...
Last potentially related work creation:
kvfree_call_rcu+0x39/0x390
__flush_itimer_signals+0x211/0x320
flush_itimer_signals+0x47/0x90
begin_new_exec+0xa6b/0x28c0
It turned out that this happens with a non-leader exec() as Hyunwoo
explained:
de_thread() calls exchange_tids() before release_task(leader), so the
struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid
now points to the thread which called execve(). pid_task() returns that
thread and lock_task_sighand() on it succeeds.
If the timer signal is blocked, its sigqueue stays queued on the leader's
task::pending. The next expiry of that timer can then run while
release_task() flushes the queue.
posixtimer_send_sigqueue() checks whether the sigqueue is already queued
with a plain list_empty(), which only reads list_head::next.
list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next
before list_head::prev, so the check can pass in between. list_add_tail()
queues the entry on the task::pending of the live thread, and the
list_head::prev store from the flush then overwrites the list_head::prev
link that list_add_tail() has just set.
__flush_itimer_signals() does not undo that either. With list_head::prev
pointing at the entry itself, its list_del_init() only stores the same
values again, so the entry is not removed from the list. It is still there
after the last reference is dropped and the timer is freed by RCU, and the
list_add_tail() of a later tgkill() follows that list_head::prev into the
freed timer.
This problem surfaced with the recent commit which moved the sigqueue flush
out of the sighand lock held region.
Hyonwoo proposed to fix this by using list_del_init_careful(), but that
just papers over the problem. After some disucssions and various attempts
to solve it, Eric pointed out that there is no reason to flush
task::pending late in release_task() and it should be done in
exit_signals() already.
As nothing can collect and deliver signals which are queued in a dying
task's pending queue, there is no reason to delay it further.
But it has to be ensured that no signals can be queued into it after that
point. exit_signals() sets PF_EXITING in task::flags, which can be used as
an indicator for this.
Cure it by:
- Preventing signal queueing for task private signals (PIDTYPE_PID) when
the task has PF_EXITING set in __send_signal_locked() and in
posixtimer_send_sigqueue().
- Protecting the unlocked setting of PF_EXITING in exit_signals() for the
task group empty and the group exit case with sighand lock
- Flushing task::pending signals right there.
Optimize that by moving the whole pending list to an on-stack list head
under sighand lock and free the signals without the lock held.
There has been quite some discussion about the lockless flush and the
non-leader exec case on weakly ordered systems. The problem is that a third
party which tries to send a posix timer signal relies on the PID lookup to
find the target task and that lookup might result in the new leader when
the signal was originaly directed to the old leader. In case that the
signal was queued on the old leader then the lockless flush raised a
concern over the following situation:
old_leader new_leader third party
A: flush_list() // list_del_in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate absolute native symlink targets before NT fixups
With symlinkroot unset, an absolute target is copied without conversion
to an NT drive path. Later code still assumes an NT prefix is present
when modifying the target and calculating the print name length.
For "/ab", this causes two failures: sym[5] and path[5] are written
past their allocations, and plen -= 2 * poff subtracts an assumed
8-byte prefix from a 6-byte UTF-16 target, wrapping u16 plen to 65534.
That underflow causes another overflow: memcpy() copies 65534 bytes
into a 24-byte buffer. A user with write access to a mounted share
can trigger these bugs with default settings.
Validate the NT drive prefix, including an ASCII drive letter, before
accessing fixed offsets or subtracting the prefix length. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: hold reference on ct until flow is released
nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe
semantics also allow to refer to the wrong conntrack from the flowtable
datapath. Hold reference on ct until flow is released after rcu grace
period.
Add rcu_barrier() on module exit path, to ensure pending flow entries
are release before module goes away. |
| Oracle VM VirtualBox before 7.2.8 allows guest OS users to cause an out-of-bounds write in the host OS in pcnetReceiveNoSync in DevPCNet.cpp in the PCNet (Am79C970A) network device model. |
| A reachable assertion vulnerability exists in the Matter SDK (connectedhomeip) before 1.4.2, specifically within the Level Control cluster's periodic server tick logic. When a MoveToLevel command is sent and immediately followed by a write of OperationMode=2 (in the Pump Configuration and Control cluster), the server tick function violates the assertion `currentLevel < maxLevel`, resulting in a crash. This can be exploited remotely without authentication to cause denial of service. Affected versions include 1.3 and 1.4 (commit ab3d5ae). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate
dvfs_get_idx() may return an out-of-range index if the SCP firmware is
buggy or returns a stale value. Only negative indexes were rejected, so a
large index walked past info->opps and could treat garbage as a clock rate
(KASAN OOB / wrong frequency to consumers). The missing upper bound dates
back to the original SCPI clock driver.
Treat indexes >= opp count as invalid and return 0, same as idx < 0. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix runt reassembly panic from short inner tot_len
When the start of an inner packet is split across two outer packets
such that fewer than 4 bytes land at the end of the first one,
__input_process_payload() saves those bytes as a runt and skips the
iplen/iphlen validation performed for in-place packets. When the
continuation packet arrives, iptfs_reassem_cont() only requires the
declared inner length to be >= sizeof(ra_runt) (6) before allocating
the reassembly skb with that attacker-controlled length.
However, __iptfs_iphlen() always returns the fixed minimum IP header
size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in
[6, 19] the header-completion copy writes past the declared packet
length, and the subsequent "ipremain -= copylen" underflows to ~4GB,
leaving the payload copy length bounded only by blkoff (up to 64KB).
At runtime the skb_put() tailroom check turns this into
skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable
locally via userns+netns IPTFS SAs and remotely against IPTFS VPN
gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps,
tun/tap delivery).
Align the runt path with the normal path by requiring the declared
inner length to cover at least the IP header size. This also subsumes
the previous >= sizeof(ra_runt) check, since the minimum IP header
is always larger than the runt buffer.
This issue was found by the autokbug dynamic kernel fuzzer at
Tencent Yunding Lab. |
| Smarty before 4.5.8 and 5.x before 5.8.5 contains a code injection vulnerability where the top-level nocache_hash is never restored during extends:/multi-component template inheritance, leaving it null. Attackers can supply assigned data containing a forged SmartyNocache marker that is copied verbatim into the regenerated PHP cache file, executing arbitrary PHP on include for remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| Information leak in SVG in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup
rfcomm_sock_cleanup_listen() closes unaccepted child sockets through
rfcomm_sock_close(), which takes the child socket lock before
rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these
locks in reverse order while handling connections and DLC state changes,
so lockdep reports a possible deadlock.
Close dequeued children without taking their socket lock. The accept queue
owns a reference to each child, and bt_accept_dequeue() locks the child
while unlinking it and clearing its parent pointer.
Dropping the child lock makes it important to prevent a concurrent
rfcomm_connect_ind() from enqueueing a new child after cleanup observes an
empty queue. Set a listening socket to BT_CLOSED while its lock is still
held, before dropping the lock and draining the queue. The state check in
rfcomm_connect_ind() then rejects new children once cleanup starts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: get the wiphy out of a dying network namespace
When a network namespace is destroyed, cfg80211_pernet_exit() moves any
wiphy back to the initial namespace, and just warns if that fails. But
moving an interface can fail (due to allocation failures), and then the
wiphy is left behind with a garbage netns pointer:
Kernel mode fault at addr 0x30
genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211]
nl80211_notify_wiphy+0xcd/0xe8 [cfg80211]
wiphy_unregister+0x169/0x3fc [cfg80211]
Note that commit debac3a20dec ("net: Remove conflicting altnames for
dying netns in __dev_change_net_namespace().") fixed another path
that could reach it without allocation failures.
Remove interfaces that cannot be moved instead of failing the switch,
so that the wiphy always ends up in the initial namespace. In this
case the netdev core will unregister the interfaces anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix out-of-bounds read in P2P public action frames
wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once
ieee80211_is_public_action() returns true. That helper only verifies the
frame is long enough for the action category field, that is
offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both
functions then read the P2P public action header up to oui_subtype at
offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where
ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32.
A public action frame of 25 to 31 bytes passes the check but is shorter
than that 32 byte header, so oui_subtype can be read out of bounds, and
because the length is unsigned, "size - ie_offset" underflows to a value
close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length,
so even the size_t subtraction in mgmt_tx() is truncated to the same
value. It then walks far past the buffer searching for a vendor element
until it reaches unmapped memory.
In the receive path the frame arrives over the air and needs no
association, so a nearby unauthenticated device can crash the host while
it is in P2P listen. Reject frames shorter than the P2P public action
header in both paths before dereferencing it. |
