| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: Clear the sg list when mapping an MR fails
rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA
mapping and registration can fail. On failure, __rds_rdma_map() unpins
the pages and frees the scatterlist, but rds_ib_free_frmr() can still
return the MR to the pool with the stale pointer set.
This leaves the pool with a dangling scatterlist and can lead to local
privilege escalation. KASAN detects the resulting use-after-free when the
MR is later torn down:
BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr
Read of size 8
Call Trace:
__rds_ib_teardown_mr
rds_ib_unreg_frmr
rds_ib_flush_mr_pool
rds_ib_flush_mrs
rds_free_mr
rds_setsockopt
Store the scatterlist in the MR only after DMA mapping succeeds. If DMA
mapping fails, return directly while the MR fields remain clear; the caller
keeps ownership of the scatterlist and its pinned pages. If a later
registration step fails, unmap the scatterlist and clear the MR fields
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: route: iterate socket tag list in mctp_lookup_prealloc_tag()
When a socket transmits a packet with MCTP_TAG_PREALLOC set,
mctp_lookup_prealloc_tag() iterates over the per-netns &mns->keys list
and matches netid, req_tag, peer_addr, and manual_alloc, without
checking whether tmp->sk == &msk->sk. This allows any MCTP socket in the
same network namespace to use and consume another socket's preallocated
tag.
Iterate the socket's own tag list (&msk->keys via sklist) instead of the
namespace-wide &mns->keys list in mctp_lookup_prealloc_tag(), ensuring
that only tags allocated by msk are matched.
Tested in QEMU against Linux 7.3.0-rc3 by allocating a manual tag
(0x18) on socket A via SIOCMCTPALLOCTAG for peer EID 9 and sending a
4-byte message with MCTP_TAG_PREALLOC from socket B in the same network
namespace. On the unfixed kernel, sendto(sock_b) using socket A's
preallocated tag succeeds (ret = 4); with this patch applied,
sendto(sock_b) fails with -ENOENT (errno = 2) while sendto(sock_a)
succeeds (ret = 4). |
| In the Linux kernel, the following vulnerability has been resolved:
llc: reserve device headroom for allocated frames
llc_alloc_frame() reserves link-layer headroom using the device type.
This is insufficient for stacked Ethernet devices such as VLAN devices,
where vlan_dev_hard_header() pushes a VLAN header before the lower
device's Ethernet header. An LLC response on such a device can
therefore underflow skb headroom in eth_header().
Use LL_RESERVED_SPACE() to account for the device's actual required
headroom while preserving the existing LLC device-type check. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: fix kernel stack leak to user-space in error path
If we fail to acquire the GPIO chip guard in gpio_desc_to_lineinfo(), we
return immediately before zeroing the info struct we'll end up passing
to the user-space later in lineinfo_get_v1(). This may leak the kernel
stack contents. Make gpio_desc_to_lineinfo() return int so that the
-ENODEV returned on failure to acquire the guard can be propagated to
the callers.
While not strictly necessary: move the memset() before trying to acquire
the SRCU read lock too for good measure. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code locally. |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to blind SQL Injection via the 'inputs' parameter in all versions up to, and including, 1.15.48 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The nonce required to reach the vulnerable handler is emitted to every public page that renders a form, making it trivially obtainable by an unauthenticated attacker from page source. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in NSquared Simply Schedule Appointments simply-schedule-appointments allows Stored XSS.This issue affects Simply Schedule Appointments: from n/a through 1.6.12.35. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.8 and 4.3.2, set_token_auth/2 inserted a bearer token from the Authorization header or access_token cookie into OAuth bootstrap JavaScript without escaping, allowing attacker-controlled token content to execute JavaScript in the management UI origin. The endpoint is exposed before authentication only when management.oauth_enabled is true, and exploitation through the cookie path additionally requires the attacker to plant an access_token cookie on the management host. This issue is fixed in versions 4.2.8 and 4.3.2. |
| A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). The Central SAML authentication ACS endpoint does not retain used SAML assertion or response identifiers to prevent replay. An attacker who obtains a valid, unexpired signed SAML response can submit it multiple times and receive distinct Central authentication tokens for the mapped identity. |
| Dell Container Storage Modules (CSM), versions prior to 1.18.0, contains a Missing Authentication for Critical Function vulnerability in the csm-authorization-tenant gRPC service (TenantService). An unauthenticated adjacent network attacker could potentially exploit this vulnerability, leading to unauthorized creation of tenant entities, cross-tenant role injection, and modification of storage access control flags. |
| libming through 0.4.8 contains a heap buffer overflow in r_readc() in src/blocks/fromswf.c. A crafted SWF file with a malformed or truncated RECT header can cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: cancel async requests when closing connection
An async request may still be waiting when a connection is closed.
This can stop the connection from closing.
Cancel active async requests before waiting for them to finish. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction
We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which
is a Bad Idea(tm). Freeing the page tables is fair game (this is what
this callback is for), but freeing the container that could still be
referenced by another part of the system is not great.
Instead, grow separate destructors that gets called when we tear the VM
down for good. From there, we can nuke both the individual MMUs as well
as the global array that points to them, safe in the knowledge that the
vcpus themselves have been destroyed already. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix cursor and pointer handling when recovering iunlink buckets
LOLLM pointed out a bug in xlog_recover_iunlink_bucket:
1. We don't null out prev_ip after releasing it, which can lead to UAF
problems if the inodegc flush call in the loop fails.
at which point I noticed even more bugs:
2. If the inodegc flush inside the loop fails, we also leak @ip.
3. We set prev_agino to agino having already advanced agino, which
results in inodes with i_prev_unlinked set to itself.
4. If we exit the bottom of the loop with prev_ip set, then prev_ip
aliases ip and we also set its i_prev_unlinked to itself.
Bugs 3 and 4 introduce loops into the unlinked list, though these loops
don't surface because we immediately flush each unlinked inode after
loading it.
Fix all of these issues. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't let hidden_space go negative in xfs_metafile_resv_init
LOLLM points out that if the amount of fdblocks that we can reserve for
a metadata btree file goes below the space already used by that file,
then the hidden_space subtraction can underflow, causing
xfs_dec_fdblocks to subtract a huge amount of space. We never want the
target to be less than the used sapce, so fix the logic that adjusts
dblocks_avail downwards.
Also fix an error in the adjacent comment. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: arizona: Fix runtime PM leak in arizona_gpio_direction_out()
Switching a persistent GPIO line from input to output acquires a
runtime PM reference on the parent device, but if the subsequent
regmap_update_bits() fails the reference is never dropped and no later
direction_in() can balance it since the direction was never changed.
Drop the reference on the update failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Fix permanent hang when flushing the kprobe optimizer
Writing 0 to /proc/sys/debug/kprobes-optimization while a kprobe is
jump-optimized never returns. The writer sleeps in D state forever with
kprobe_sysctl_mutex held, so any later read or write of that sysctl
hangs as well. For example, with vfs_read+9 as an optimizable address
in this build:
# cd /sys/kernel/tracing
# echo 'p:myprobe vfs_read+9' >> kprobe_events
# echo 1 > events/kprobes/myprobe/enable
# # wait until /sys/kernel/debug/kprobes/list shows [OPTIMIZED]
# echo 0 > /proc/sys/debug/kprobes-optimization
INFO: task sh:246 blocked for more than 10 seconds.
Call Trace:
<TASK>
__schedule+0x1176/0x4f70
schedule+0xdc/0x2c0
schedule_timeout+0x17b/0x260
wait_for_completion+0x173/0x3c0
wait_for_kprobe_optimizer_locked+0xbc/0x130
proc_kprobes_optimization_handler+0x156/0x1b0
proc_sys_call_handler+0x324/0x490
vfs_write+0x52d/0xfe0
ksys_write+0xff/0x200
do_syscall_64+0x106/0x630
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
...
INFO: task cat:265 is blocked on a mutex likely owned by task sh:246.
wait_for_kprobe_optimizer_locked() reinitializes optimizer_completion,
asks the optimizer thread to flush and sleeps in wait_for_completion().
The thread drains the (un)optimizing lists, but calls complete() only
if completion_done() is true, i.e. if the completion is already done,
which never happens while someone waits. disarm_all_kprobes() and
kprobe_trace_self_tests_init() wait the same way.
Calling complete() unconditionally would not be enough: the waiter
drops kprobe_mutex while it sleeps, and nothing else serializes the
sysctl handler against the debugfs "enabled" file. A second flusher
that still finds the lists non-empty, e.g. because a disabled probe is
queued for unoptimizing, reinitializes the completion under the first:
sysctl write debugfs "enabled" write
unoptimize_all_kprobes()
wait_for_kprobe_optimizer_locked()
init_completion(c)
mutex_unlock(&kprobe_mutex)
wait_for_completion(c)
disarm_all_kprobes()
wait_for_kprobe_optimizer_locked()
init_completion(c)
// c->wait is reset, the first
// waiter is off the queue
mutex_unlock(&kprobe_mutex)
wait_for_completion(c)
kprobe_optimizer()
complete(c)
// wakes the debugfs writer only
where c is &optimizer_completion. Lining up the two writes during an
optimizer pass loses the sysctl writer this way.
Replace the completion with a counter of optimizer passes, bumped at the
end of each pass and signalled with wake_up_var_locked(), both under
kprobe_mutex. A flusher samples the count and waits with
wait_var_event_mutex(), which drops kprobe_mutex only while sleeping, so
a new count means a whole pass ran in the meantime. Nothing is
reinitialized, so several flushers can sleep in the wait at once. |
