| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()
The helper function _ip_cprb_helper() uses internal buffer memory for
building and processing CPRBs. After use this buffer was never
scrubbed which could lead to leaving for example clear key material in
memory which could be exposed via tricky reuse of this same memory.
Extend the _ip_cprb_helper() function with another parameter 'scrub'
used to steer scrubbing of this buffer. So now the caller has the
opportunity to decide if scrubbing is needed or not.
Extend the clear key to secure key token import process in function
cca_clr2cipherkey() to tell the helper function from above to scrub
the cprb buffer when the clear key value is part of the request data.
Add explicit scrubbing on return from function cca_clr2cipherkey() for
the random EXOR buffer and the cprb buffer.
Overall this cleans the internal used buffer in case of clear key
import to prevent sensitive data to get exposed. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: handle missing status supplier
MAX17040 does not report charger state itself, so the driver forwards
POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is
registered, power_supply_get_property_from_supplier() returns -ENODEV and
leaves the output value untouched.
max17040_get_property() currently ignores that error and returns success,
so userspace can read an uninitialized status value from the battery power
supply. This happens on systems that use the fuel gauge without a charger
supplier relationship in firmware.
Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and
propagate other supplier lookup errors. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
In pcpu_create_chunk(), nr_pages is the total contiguous backing
allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated()
uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap.
Since bit N in chunk->populated means page offset N inside every unit is
backed. When nr_units > 1, the function writes beyond chunk->populated.
Fix it by using chunk->nr_pages.
It also fixes the global pcpu_nr_empty_pop_pages accounting, since
pcpu_balance_free() only iterates up to chunk->nr_pages.
Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap
properly") introduced the bitmap overflow issue. Later, commit
b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and
chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the
accounting issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate individual TWT params before driver setup
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
[edit commit message to not overclaim lack of validation nor
understate driver impact] |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: prevent read-only mappings from becoming writable
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071). |
| An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: mglru: fix stale batch updates after memcg reparenting
The mglru page table walker batches per-generation size deltas in
walk->nr_pages while walking page tables without holding the lruvec lock.
The reset_batch_size() later folds those deltas into walk->lruvec under
the lruvec lock.
The page table walker can run concurrently with the memcg reparenting path
as follows:
CPU0 CPU1
==== ====
walk_mm
--> walk_page_range
--> update_batch_size
--> walk->nr_pages += delta
mem_cgroup_css_offline
--> memcg_reparent_objcgs
--> lock lruvec
lru_gen_reparent_memcg
--> reparent child folios to parent
unlock lruvec
lock lruvec
reset_batch_size
--> child lrugen->nr_pages += delta
This will trigger the following warning in lru_gen_exit_memcg():
VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
sizeof(lruvec->lrugen.nr_pages)));
And the user-visible impact of underestimated nr_pages in MGLRU was
premature OOMs because MGLRU does not try to reclaim memory when nr_pages
reaches zero, but there are still more pages.
To fix it, make reset_batch_size() check CSS_DYING under RCU before
flushing the pending batch. A non-dying memcg keeps the original lruvec
stable against RCU-delayed offlining; a dying memcg redirects the deltas
to the first non-dying ancestor. |
| gitoxide before 0.69.0 contains unchecked array indexing in delta application and uncapped allocation from attacker-controlled size headers in gix-pack. Attackers can send crafted pack data during clone or fetch operations to trigger panics or out-of-memory process kills. |
| Incorrect access control in the AdHoc User creation form of eMudhra emSigner v2.8.7 allows unauthenticated attackers to arbitrarily modify usernames and privileges by using the email address of a registered user. |
| An authorization bypass vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.17 due to improper authorization validation in delegated email sending functionality. An authenticated attacker can send specially crafted SOAP requests to impersonate another user and send emails without possessing the required delegation or send-as permissions. This occurs in the SaveDraftRequest SOAP handler. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Dayneks Software Industry and Trade Inc. E-Commerce Platform allows Reflected XSS.
This issue affects E-Commerce Platform: through 28082026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| In Zimbra Collaboration (ZCS) before 10.1.17, a stored cross-site scripting (XSS) vulnerability exists in the Zimbra Classic Web Client due to insufficient sanitization of specific attachment content during inline preview. An attacker can send a crafted email containing a malicious attachment that, when previewed by a user, executes arbitrary JavaScript within the victim's browser session. Successful exploitation may allow an attacker to perform unauthorized actions on behalf of the victim user, potentially leading to data exfiltration or unauthorized access to sensitive information. |
| In Zimbra Collaboration (ZCS) before 10.1.17, a path traversal vulnerability exists in the Zimbra Briefcase document editing functionality due to improper validation of the packages parameter. An authenticated attacker can exploit this vulnerability by supplying a crafted path traversal sequence, potentially allowing unauthorized disclosure of sensitive files within the web application directory. |
| SvelteKit versions from 2.49.0 through 2.53.2 (fixed in 2.53.3) contain a deserialization expansion issue in the experimental form remote function. When an application enables experimental.remoteFunctions and uses the form function to process the files array without validating files.length or individual file sizes, an attacker can submit relatively small inputs that expand into very large file arrays, leading to expensive processing and denial of service. |
| Insecure Direct Object References (IDOR) in eMudhra emSigner v2.8.7 allow authenticated attackers to gain unauthorized access to application content and view sensitive data of other users via manipulation of the documentID and EncryptedDocumentId parameters. |
| In Zimbra Collaboration before 10.1.17, a local file inclusion (LFI) vulnerability exists in the Zimbra Classic Web Client due to improper validation of the fu request parameter. An unauthenticated attacker can exploit this vulnerability by supplying a crafted path, potentially allowing unauthorized disclosure of protected files, such as WEB-INF/web.xml, within the web application directory. This occurs in the Forward servlet. |
| A flaw was found in the file-iff (IFF/ILBM) plugin in GIMP. When processing a specially crafted IFF/ILBM image file, the plugin does not properly validate the HAM row size and improperly handles cases where the number of color planes (nPlanes) is zero. This causes a row size mismatch that bypasses memory bounds checking, resulting in heap out-of-bounds reads. This issue can result in an application crash, leading to a denial of service or a limited information disclosure of heap memory contents. |
| SiYuan versions before 3.7.4 contain a cross-site WebSocket hijacking vulnerability in the admin-only /ws/network/proxy endpoint that explicitly disables origin validation by setting CheckOrigin to unconditionally return true. Attackers can craft malicious webpages that establish WebSocket connections to this endpoint and direct the SiYuan kernel process to proxy arbitrary network traffic to attacker-chosen targets, enabling authenticated network pivoting through the victim's machine. |
| JupyterLab versions >=4.6.0,<=4.6.1 and <=4.5.9 contain an allowlist/blocklist enforcement gap in PyPIExtensionManager.install(). A missing 'await' caused the is_install_allowed coroutine to never execute, so the extension allowlist/blocklist check was not enforced for direct callers of install(). The stock JupyterLab HTTP API and Extension Manager UI are not affected, as they perform a separate, correctly awaited check. The issue affects only deployments where a custom extension or downstream integration imports PyPIExtensionManager and calls install() directly with a package name influenced by untrusted input, an allowlist/blocklist is configured, the PyPI Extension Manager is enabled, and kernels and terminals are disabled or delegated to remote hosts. Fixed in JupyterLab 4.6.2 and 4.5.10. |
| An unauthenticated attacker can crash the ManageSieve login process by sending a small malformed command before authenticating. If running in high-security mode (default for community releases), only the attacker's own connection is terminated. If running in high-performance mode (default for Pro releases), all connections handled by the same managesieve-login process are terminated. Repeating the attack can cause denial of service for Sieve script management. Restrict network access to the ManageSieve service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known. |
