| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-sof: Bound DAI link iteration
create_sdw_dailinks() walks sof_dais until it finds an entry with
initialised cleared, but sof_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: fix lockless traversals of ->s_children
Having the parent directory locked protects entries from removal
by another thread, but it does *not* protect cursors from being
moved around by lseek() - or freed, for that matter. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Destroy the pages content after detaching from dmabuf
Sashiko points out this has gotten out of order, the mutex could still be
in use through the dmabuf invalidation callbacks. Don't destroy any of the
pages content until the dmabuf is fully detached. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link
mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree()
after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents
future RCU readers from obtaining the pointer -- it does not wait for
existing readers that already hold it via rcu_dereference.
The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid
and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer
via rcu_dereference just before the NULL assignment, it will dereference
freed memory after the kfree.
struct mt76_vif_link already contains an rcu_head field that is unused at
this free site -- a developer oversight, since the adjacent
kfree_rcu_mightsleep call for rx_sc in the same function shows the
pattern was understood.
Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb()
If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine,
mt7996 driver leaks an already allocated tx token. Fix the issue
releasing the token in case of error. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs()
In the beginning of the loop, we try to obtain a locked delayed ref head,
if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(),
which can return an error pointer. If the error pointer is -EAGAIN we do
a continue and go back to the beginning of the loop, which will not try
again to call btrfs_select_ref_head() since 'locked_ref' is no longer
NULL but it's ERR_PTR(-EAGAIN), and then we do:
spin_lock(&locked_ref->lock);
against a ERR_PTR(-EAGAIN) value, generating an invalid pointer
dereference.
Fix this by ensuring that 'locked_ref' is set to NULL when
btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count'
as well, to prevent infinite looping. We do this by doing a goto to the
bottom of the loop that already sets 'locked_ref' to NULL and does a
cond_resched(), with an increment to 'count' right before the goto.
These measures were in place before the refactoring in commit 0110a4c43451
("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally
lost afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: do not configure xps for XDP queues
netif_set_xps_queue() should not be called for an XDP Tx queue, since such
queues are not netdev-exposed. On systems with number of CPUs >=64, on E610
adapter, netdev is configured with maximum number queue pairs being 63
(due to MSI-X assignment), but configuring XDP results in 64 XDP queues.
So, during XDP program load, when netif_set_xps_queue() is called for the
last XDP queue, we get a WARNING with a call trace and KASAN report
afterwards (if enabled).
[ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668
[...]
[ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40
[ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84
[ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246
[ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000
[ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488
[ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000
[ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8
[ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8
[ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000
[ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0
[ 2012.700077] PKRU: 55555554
[ 2012.700080] Call Trace:
[ 2012.700084] <TASK>
[ 2012.700087] ? ktime_get+0x61/0x150
[ 2012.700097] ? usleep_range_state+0x133/0x1b0
[ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10
[ 2012.700114] netif_set_xps_queue+0x31/0x50
[ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe]
[...]
[ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe]
[...]
[ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40
[ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668
Skip XPS configuration for XDP Tx queues. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Handle layout stid in nfsd4_drop_revoked_stid()
nfsd4_drop_revoked_stid() has no SC_TYPE_LAYOUT case, so when a
client sends FREE_STATEID for an admin-revoked layout stid, the
default branch releases cl_lock and returns without unhashing or
releasing the stid. The stid remains in the IDR and on the
per-client list until the client is destroyed.
Remove the layout stid from the per-client list and call
nfs4_put_stid() to drop the creation reference. When the
refcount reaches zero, nfsd4_free_layout_stateid() handles the
remaining cleanup: cancelling the fence worker, removing from
the per-file list, and freeing the slab object. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file()
file_hash() digests the first LOCKD_FH_HASH_SIZE bytes of
nfs_fh.data when bucketing nlm_files[], independent of fh.size.
Commit 3de744ee4e45 ("lockd: Use xdrgen XDR functions for the
NLMv4 TEST procedure") set .pc_argzero to zero for the converted
procedures and moved file-handle population into
nlm4svc_lookup_file(), which copies only xdr_lock->fh.len bytes
into lock->fh.data.
When an NLMv4 client presents a file handle shorter than
LOCKD_FH_HASH_SIZE, bytes fh.len..31 retain whatever the argument
buffer held from an earlier request. The same wire handle then
hashes to different buckets across calls; nlm_lookup_file() misses
the existing nlm_file entry, and lock-state lookups fail.
Zero only the tail bytes that file_hash() would otherwise consume.
Handles of LOCKD_FH_HASH_SIZE or larger already populate every byte
that file_hash() reads. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields on map value recycle
Map update and delete paths currently call bpf_obj_free_fields() when a
value is being replaced or recycled. That makes field destruction depend
on the context of the update/delete operation. For tracing programs this
can include NMI context, where referenced kptr destructors, uptr
unpinning, and graph root destruction are not generally safe.
Introduce bpf_obj_cancel_fields() for the reusable-value path. It only
performs NMI-safe cleanup for timer, workqueue, and task_work fields.
Fields that need full destruction are left attached to the recycled value
and are destroyed by the final cleanup path instead.
Switch array and hashtab update/delete/recycle paths to this cancel
helper. Keep bpf_obj_free_fields() for final map destruction and for
bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator
destructors, so teardown continues to walk the normal and extra elements
and fully destroy their fields.
This deliberately relaxes the eager-free semantics of map update/delete
for special fields. Programs that relied on a recycled map slot becoming
empty immediately after update/delete were relying on behavior that
cannot be implemented safely from every BPF execution context without
offloading arbitrary destructors.
There is a chance this change breaks programs making assumptions
regarding the eager freeing of fields. If so, we can relax semantics to
cancellation only when irqs_disabled() is true in the future. However,
theoretically, map values that get reused eagerly already have weaker
guarantees as parallel users can recreate freed fields before the new
element becomes visible again. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: hold vduse_lock across IDR lookup in open path
vduse_dev_open() looks up struct vduse_dev through the IDR and then
acquires dev->lock only after vduse_lock has been dropped.
This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the
same object from the IDR and free it before the open path locks the
device, leading to a use-after-free.
Close this race by keeping vduse_lock held until dev->lock has been
acquired in the open path, matching the lock ordering already used by
the destroy path. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vdpa: validate virtqueue index in mmap and fault paths
vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a
virtqueue index for get_vq_notification(), but they do not validate
that the index is smaller than v->nvqs.
The ioctl path already performs both a bounds check and
array_index_nospec(), but the mmap/fault path only checks that the
index fits in u16. This allows an out-of-range queue index to reach
driver-specific get_vq_notification() callbacks.
Fix this by extracting a unified vhost_vdpa_get_vq_notification()
helper that validates the queue index against v->nvqs and applies
array_index_nospec() before calling the driver callback. Both the
mmap and fault paths use this helper, and the bounds checking is
consolidated into a single location.
From source inspection, the most defensible impact is out-of-bounds
access in the callback path, potentially leading to invalid PFN
remaps and crash/DoS. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: rtc: tear down old virtqueues before restore
virtio_device_restore() resets the device and restores the negotiated
features before calling ->restore(). viortc_freeze() intentionally
leaves the existing virtqueues in place so the alarm queue can still
wake the system, but viortc_restore() immediately calls
viortc_init_vqs() without first deleting those old queues.
If virtqueue reinitialization fails on virtio-pci, the transport error
path can run vp_del_vqs() against a newly allocated vp_dev->vqs array
while vdev->vqs still contains the old virtqueues. vp_del_vqs() then
looks up queue state through the new array and can dereference a NULL
info pointer in vp_del_vq(), crashing the guest kernel during restore.
This can also happen during a non-faulty reinitialization, when one of
the vp_find_vqs_msix() attempts is unsuccessful before a later attempt
would succeed.
Delete the stale virtqueues before rebuilding them. If restore fails
before virtio_device_ready(), reuse the remove path to stop the device.
Once the device is ready, return errors directly instead of deleting the
virtqueues again. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/net: complete zerocopy ubufs only once
vhost-net initializes one ubuf_info per outstanding zerocopy TX
descriptor and hands it to the backend socket. The networking stack may
then clone a zerocopy skb before all skb references are released. For
example, batman-adv fragmentation reaches skb_split(), which calls
skb_zerocopy_clone() and increments the same ubuf_info refcount.
vhost_zerocopy_complete() currently treats every ubuf callback as a
completed vhost descriptor. It dereferences ubuf->ctx, writes the
descriptor completion state, and drops the vhost_net_ubuf_ref even when
the callback only releases a cloned skb reference. A backend reset can
therefore wait for and free the vhost_net_ubuf_ref while another cloned
skb still carries the same ubuf_info. A later completion then
dereferences the freed ubufs pointer.
KASAN reports the stale completion as:
BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x1d7/0x1f0
BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x101/0x1f0
vhost_zerocopy_complete
skb_copy_ubufs
__dev_forward_skb2
veth_xmit
The freed object was allocated from vhost_net_ioctl() while setting the
backend and freed through kfree_rcu()/kvfree_rcu_bulk after backend
removal, while delayed skb completion still reached
vhost_zerocopy_complete().
Honor the generic ubuf_info refcount before touching vhost state, and run
the vhost descriptor completion only for the final ubuf reference. This
matches the msg_zerocopy_complete() ownership rule for cloned zerocopy
skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler
Look up the IRQ index in oct_hw->irqs instead of assuming
irq - irqs[0]. This supports non-contiguous IRQ numbers and
avoids incorrect ring indexing when irqs[0] is not the base. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/qat: fix f_pos race in qat_vf_resume_write()
qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but
copies into the migration-state buffer after taking the lock and
re-reading the shared file position.
Two concurrent writers could therefore pass the bounds check with the
old offset, then have the second writer copy after the first advanced
f_pos, writing past the end of the migration-state buffer.
Take migf->lock before doing the boundary checks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Tighten cgroup storage cookie checks for prog arrays
The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local
storage") is still incomplete. The prog-array compatibility check
treats a program with no cgroup storage as compatible with any stored
storage cookie. This allows a storage-less program to bridge a tail
call chain between an entry program and a storage-using callee even
though cgroup local storage at runtime still follows the caller's
context, that is, A -> B(no storage) -> C(storage) path.
Requiring exact cookie equality would break the legitimate case of a
storage-less leaf program being tail called from a storage-using one.
Instead, only accept a zero storage cookie if the program cannot
perform tail calls itself. This keeps A -> B(no storage) working
while rejecting the A -> B(no storage) -> C(storage) bridge. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix UAF in hci_unregister_dev()
hci_unregister_dev() does not disable cmd_timer and ncmd_timer
before the hci_dev structure is freed. If a timeout fires
during device teardown, the callback dereferences freed memory
(including the hdev->reset function pointer), leading to a
use-after-free.
Add disable_delayed_work_sync() calls alongside the existing
disable_work_sync() calls to ensure both timers are fully
quiesced before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: validate codec capability element length
Read Local Codec Capabilities returns a sequence of capability elements.
Each element starts with a one-byte length followed by that many payload
bytes.
hci_read_codec_capabilities() checks that the skb contains the length
byte, but then validates only caps->len against the remaining skb
length. A malformed controller response with one remaining byte and
caps->len set to one passes that check even though the element needs two
bytes. The parser then records a two-byte capability and copies one
byte beyond the advertised response payload into the codec list.
Validate the full element size, including the length byte, before adding
it to the accumulated capability length. This preserves all well-formed
capability elements and drops only truncated controller responses. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix undefined shift of user RQ WQE size
set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on
the user-provided rq_wqe_shift, which is only checked to be greater than
32, so shifts of 32 are still accepted. A shift of 31 also overflows a
signed integer, leading to undefined behavior.
Use check_shl_overflow() to compute the RQ WQE size and reject any
invalid values. |
