Export limit exceeded: 401112 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401112 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97488 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: qnx4: handle set_blocksize failures qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97487 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jfs: handle set_blocksize failures jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97486 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hpfs: handle set_blocksize failures hpfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97485 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: omfs: handle set_blocksize failures omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97484 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usbip: vhci_hcd: fix NULL deref in status_show_vhci platform_get_drvdata() can return NULL if a VHCI host controller's probe failed (e.g. due to USB bus number exhaustion). status_show_vhci() checked for a NULL pdev but not for a NULL hcd returned by platform_get_drvdata(). Passing NULL to hcd_to_vhci_hcd() does not return NULL - it returns a pointer offset of 0x260, causing a NULL pointer dereference when that value is subsequently dereferenced. Add a NULL check on hcd before calling hcd_to_vhci_hcd(). Move status_show_not_ready() above status_show_vhci() to make it callable from the new error path without a forward declaration. | ||||
| CVE-2026-97483 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: core: hcd: fix possible deadlock in rh control transfers >From within the SCSI error handler memory allocations must not trigger IO. Handling errors in UAS and the storage driver may involve resetting a device. The thread doing the reset itself relies on VM magic. However, that is insufficient, as resetting a device involves resuming it. Resumption as well as resetting involves conrol transfers to the parent of the device to be reset. That may be a root hub. Hence usbcore must heed the flags passed to usb_submit_urb() processing control transfers to root hubs. The problem exist since the storage driver has been merged. | ||||
| CVE-2026-97482 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: goku_udc: avoid NULL deref of dev->driver in INT_USBRESET log goku_irq() handles a number of bus events under a single ep0 path. It already guards the gadget driver suspend/resume callbacks against a NULL ->driver: if (dev->gadget.speed != USB_SPEED_UNKNOWN && dev->driver && dev->driver->resume) { spin_unlock(&dev->lock); dev->driver->resume(&dev->gadget); ... } but the very next branch unconditionally dereferences dev->driver when an INT_USBRESET arrives: if (stat & INT_USBRESET) { ACK(INT_USBRESET); INFO(dev, "USB reset done, gadget %s\n", dev->driver->driver.name); } If the controller raises INT_USBRESET before any gadget driver has been bound (or after one has been unbound), dev->driver is NULL and the printk dereferences NULL. smatch flags the inconsistency: drivers/usb/gadget/udc/goku_udc.c:1618 goku_irq() error: we previously assumed 'dev->driver' could be null (see line 1607) Fall back to a placeholder when the gadget driver is not bound. No functional change while a gadget driver is bound. | ||||
| CVE-2026-97481 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix possible ISR soft lockup There are rare cases in which the host gets stuck in the ISR because it is flooded with messages during the startup phase. The reason for the soft lockup in the ISR is the missing FIFO error IRQ (FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers the IRQ immediately again. Fix this by adding a check for the FIFOE status and clearing the FIFO if no data is ready (DR). This behavior was observed on an AM62L device which uses the OMAP 8250 driver. Fix it for all 8250 drivers, since the OMAP driver's special IRQ setup handling may trigger this behavior more frequently, but it is not ensured that other 8250 drivers aren't affected. | ||||
| CVE-2026-97476 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: filter RDS_INFO_* getsockopt by caller's netns The RDS_INFO_* family of getsockopt(2) options reads several file-scope global lists that are not per-netns: rds_sock_info / rds6_sock_info, rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list rds_conn_info / rds6_conn_info, rds_conn_message_info_cmn (for the *_SEND_MESSAGES and *_RETRANS_MESSAGES variants), rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS) -> rds_conn_hash[] The handlers do not filter by the caller's network namespace. rds_info_getsockopt() has no netns or capable() check, and rds_create() has no capable() check, so AF_RDS is reachable from an unprivileged user namespace. As a result, an unprivileged caller in a fresh user_ns plus netns can read the bound address and sock inode of every RDS socket on the host, the peer address of incoming messages on every RDS socket on the host, the peer address and TCP sequence numbers of every rds-tcp connection on the host, and the peer address and RDS sequence numbers of every RDS connection on the host. The rds-tcp transport is reachable from a non-initial netns (see rds_set_transport()), so a one-shot init_net gate at rds_info_getsockopt() would deny legitimate per-netns visibility to rds-tcp callers. Instead, filter at each handler by comparing the netns of the caller's socket to the netns of the list entry, or to rds_conn_net(conn) for connection paths. Only copy entries whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are aggregate statistics and remain global. Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket binds 127.0.0.1:4242 in init_net as root. A child process enters a fresh user_ns plus netns and opens AF_RDS there, then calls getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the child sees the init_net socket. After this change, the child sees zero entries. Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count globals. v2 used them for the size precheck and lens->nr; v3 replaced the precheck with a per-ns count from a first pass over the list, so the globals have no remaining readers. The matching increments and decrements in rds_create()/rds_destroy_sock() and rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with them. Reported by the kernel test robot under clang W=1. | ||||
| CVE-2026-97475 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tegra/soctherma: Switch to devm cooling device registration Use devm_thermal_of_cooling_device_register() to simplify resource management and avoid manual cleanup in error paths. As a side effect this change has the benefit of solving an existing issue. Before, the function tegra_soctherm_remove() only called debugfs_remove_recursive() and never called thermal_cooling_device_unregister() for any of the cooling devices registered here. After the driver removal, the thermal framework's cdev list would still hold references to thermal_cooling_device objects whose devdata pointer (ts) pointed to memory already freed by the platform device's devm cleanup. With this change, the cooling device is unregistered when the driver is removed, thus fixing the issue above. | ||||
| CVE-2026-97472 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: fix temp address generation after prefix deprecation When a router temporarily deprecates an IPv6 prefix (either by sending a Router Advertisement with Preferred Lifetime = 0 or by letting the lifetime expire) and later restores it, the kernel permanently loses its ability to generate temporary privacy addresses (RFC 8981) for that prefix. This happens because the address worker attempts to generate a replacement temporary address when the current one nears expiration. As the base prefix is deprecated already, the generation fails after marking the temporary address as already having spawned a replacement (ifp->regen_count++). When the router eventually restores the prefix, the temporary address becomes active again. However, once it naturally expires, the address worker sees this temporary address already tried to generate one and skips the regeneration. Fix the issue by resetting the regen_count check of the latest temp address generated for the prefix updated by the incoming RA. | ||||
| CVE-2026-97456 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix condition check in acpi_ps_parse_loop() Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent out-of-bounds access. | ||||
| CVE-2026-97455 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix use-after-free in acpi_ds_terminate_control_method() Fix use-after-free issue in acpi_ds_terminate_control_method() by clearing references to method locals and arguments. | ||||
| CVE-2026-97454 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: add boundary checks in acpi_ps_get_next_field() Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds access. | ||||
| CVE-2026-97453 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: validate byte_count in acpi_ps_get_next_package_length() Validate package length reading in acpi_ps_get_next_package_length(). | ||||
| CVE-2026-97452 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Prevent adding invalid references Prevent adding references for local, argument, and debug objects in acpi_ut_copy_simple_object(). | ||||
| CVE-2026-97451 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op) Add overflow check for Index + Length to prevent integer overflow when calculating the truncation length. This prevents negative size parameter being passed to memcpy(). | ||||
| CVE-2026-97450 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: validate handler object type in two places ACPICA: validate handler object type in acpi_ev_has_default_handler() and acpi_ev_find_region_handler(). | ||||
| CVE-2026-97449 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add package limit checks in parser functions Add package limit checks in parser functions to prevent out-of-bounds access. | ||||
| CVE-2026-97448 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add validation for node in acpi_ns_build_normalized_path() Add validation for node in acpi_ns_build_normalized_path() to prevent use-after-free vulnerabilities. | ||||