| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error. |
| Missing authorization in Translate in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| Improper input validation in Omnibox in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix reparse buffer bounds in cifs_query_reparse_point()
In cifs_query_reparse_point(), the start >= end check before casting to
struct reparse_data_buffer * only ensures the start pointer is within the
response. It fails to verify that there is enough space remaining for the
fixed 8-byte header of the structure.
If a server provides a DataOffset that leaves less than 8 bytes remaining,
the check passes, but subsequent reads of ReparseTag and ReparseDataLength
will occur out-of-bounds.
Fix this by ensuring the remaining space is at least the size of the
reparse_data_buffer structure before accessing its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cyttsp5 - clamp the HID report size before memcpy
The size field comes from the device and is used as the memcpy()
length into response_buf, which is CY_MAX_INPUT bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: spi: reset bytes_xfered before retrying CRC failures
mmc_spi_data_do() updates data->bytes_xfered after each block has been
transferred successfully. If a later block in the same data request
fails with a CRC error, data->bytes_xfered may therefore contain the
number of bytes completed before the failing block.
mmc_spi_request() has a private recovery path for such CRC failures. It
sends STOP_TRANSMISSION, clears data->error and jumps back to
crc_recover to issue the same command and data request again. However,
it does not clear data->bytes_xfered before the retry.
If the retry succeeds, the request is completed with the bytes from the
failed attempt still included in data->bytes_xfered. For a multi-block
request this can make the completed request report more bytes than were
transferred by the successful retry, and can even exceed the request size
when most blocks completed before the CRC error.
This is most likely to be observed on MMC-over-SPI systems where long
multi-block transfers occasionally hit a data CRC error but the
mmc_spi-internal retry succeeds. The data itself is retried, but the
completion accounting is not.
Clear data->bytes_xfered together with data->error before repeating the
request so the final completion reports only the bytes transferred by the
successful attempt. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasing host").
This issue was found by an in-house static analysis tool. |
| Use after free in V8 in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Confused deputy in Omnibox in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to bypass web origin policy via crafted network traffic. (Chromium security severity: Medium) |
| Missing authorization in Animation in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Missing authorization in Network in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Information leak in Payments in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: recheck intermediate backing files on mprotect()
mprotect() can be used to bypass the SELinux checks that mmap() performs
against the intermediate layers of a stacked filesystem.
mmap() checks every backing layer as the request descends through the
stack. mprotect() only has the lowest backing file in vma->vm_file, so it
rechecks the top-level user and the lowest mounter, but skips the mounters
of every layer in between. With two nested overlayfs mounts and a policy
denying mounter_t -> middle_file_t:file { execute }, a direct
mmap(PROT_EXEC) is denied:
avc: denied { execute } for pid=71 comm="nested_exec"
path="/payload" dev="overlay" ino=9
scontext=user_u:base_r:mounter_t
tcontext=user_u:object_r:middle_file_t tclass=file permissive=0
while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds.
Preserve each intermediate path, mounter SID and file-description SID in
the backing-file security blob, copying the saved entries when another
backing layer is opened. Allocate the array only for nested backing files,
and release it and the path references in the backing_file_free hook.
During mprotect(), recheck fd { use } and the requested inode permissions
for every saved mounter, and include the intermediate layers in the execmod
checks. Policy for nested stacking may then need to grant intermediate
mounters what a direct mmap() already requires, and execmod on intermediate
labels for binaries using text relocations.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy, on a mainline tree containing
commit f2381b546e7e ("fs: fix user path of nested backing files").
[PM: subject tweak] |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve user SID across nested backing files
SELinux saves the user file SID in a backing-file security blob so it
remains available after mmap() replaces vma->vm_file with a backing file.
For nested backing files (overlayfs over overlayfs, or FUSE passthrough
backed by overlayfs), user_file may itself be a backing file. Its
fsec->sid is the SID of the mounter that opened it, rather than the user
that opened the top-level file. mprotect() then checks fd { use } against
the mounter SID. This can incorrectly deny access without a domain
transition, or check the wrong target SID after one.
Copy the saved user SID when user_file is a backing file. Keep using the
regular file SID for the first backing layer.
With two nested overlayfs mounts and SELinux enforcing,
mprotect(PROT_READ) returns EACCES with an fd { use } denial against the
mounter SID. With this change, mprotect() succeeds.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy. The original test was also repeated with Fedora Cloud
Base 44 userspace and gave the same result. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: fix bogus set_shrinker_bit() with cgroup.memory=nokmem
With cgroup.memory=nokmem, shrinker_memcg_alloc() bails out early and
never allocates an id, so shrinker->id keeps the 0 it got from the
kzalloc() in shrinker_alloc(). __list_lru_init() then copies that 0 into
lru->shrinker_id, where it looks like a valid bit index.
Nothing calls expand_shrinker_info() on nokmem either, so shrinker_nr_max
stays 0 and every memcg ends up with an empty map (map_nr_max == 0).
deferred_split_folio() hands a real memcg to __list_lru_add() regardless
of whether the lru is memcg aware, so the first THP queued in a cgroup
does set_shrinker_bit(memcg, nid, 0) and trips the bounds check:
WARNING: mm/shrinker.c:212 at set_shrinker_bit+0x7d/0x90, CPU#126
Call Trace:
<TASK>
deferred_split_folio+0x18c/0x220
map_anon_folio_pmd_nopf+0xdd/0x130
map_anon_folio_pmd_pf+0x14/0xb0
do_huge_pmd_anonymous_page+0x1a1/0x620
__handle_mm_fault+0xea9/0x10d0
handle_mm_fault+0xe5/0x320
do_user_addr_fault+0x1cc/0x870
exc_page_fault+0x81/0x1b0
asm_exc_page_fault+0x27/0x30
</TASK>
Harmless, the WARN_ON_ONCE() is what keeps the out of bounds unit[] read
from happening, but the id should not look valid in the first place.
Clear it before returning.
Two other spots could paper over this: drop the id in __list_lru_init()
when nokmem turns memcg_aware off, or make deferred_split_folio() pass
NULL like list_lru_add_obj() does. Both leave shrinker->id lying around
for the next caller, so fix it where the id is handed out. |
| Missing authorization in BrowserTag in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Confused deputy in Contextual Tasks in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to bypass web origin policy into a privileged page via a crafted HTML page. (Chromium security severity: Medium) |
| NVIDIA TensorRT contains a vulnerability where an attacker can cause an out of bounds read. A successful exploit of this vulnerability may lead to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
