| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Fix TOCTOU in io_uring passthrough command setup
scsi_bsg_uring_cmd() reads bsg_uring_cmd from the shared mmap'd SQE.
Userspace can change a field after we check it and before we use it.
request_len is the sharp case: it can grow past sizeof(scmd->cmnd) after
the bound check and overflow scmd->cmnd in copy_from_user().
READ_ONCE() the SQE fields we check or use into locals before use. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Reserve a terminator byte for the login payload
iscsi_target_check_login_request() rejects a login PDU whose
DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and
login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS
bytes. Since iscsit_get_login_rx() receives payload_length + padding
bytes, where
padding = ((-payload_length) & 3);
any payload_length from 8189 to 8192 fills the whole 8192 byte
buffer. The write stays in bounds, but no byte is left for a NUL
terminator.
The buffer is subsequently consumed as a C string. In the CHAP path
chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls
strstr(in_buf, pattern) followed by strlen_semi(), none of which take a
length. convert_null_to_semi() additionally rewrites every embedded NUL
to ';', so even a payload made of well formed NUL separated key=value
records is left without a terminator. These walk past the end of the
object into adjacent slab memory. It is reachable by an unauthenticated
initiator against a portal configured for CHAP; when authentication is
not required iscsi_login_zero_tsih_s2() rewrites AuthMethod to None and
the CHAP path is never entered.
Allocate one extra byte. kzalloc() zeroes it and nothing ever writes to
it, as every writer copies to offset 0 for at most MAX_KEY_VALUE_PAIRS
bytes, so the buffer is always terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Fix DMA mapping ownership on partial map failure
If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps
TX but leaves tx_sg_mapped set. If TX mapping fails on a later
transfer, mappings created for earlier transfers remain active.
In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they
are assigned only after every transfer has been mapped. The subsequent
spi_unmap_msg() may therefore unmap the TX mapping again or release
earlier mappings using a NULL or stale device. Using a NULL device can
trigger an oops. An empty SG table does not prevent the NULL dereference
because dma_unmap_sg_attrs() accesses the device before checking the
entry count.
Publish both mapping devices before mapping starts and unwind all
failures through __spi_unmap_msg(). This clears the mapping flags and
releases each mapping once with the device that created it.
Publishing the devices before the loop also refreshes them when no
transfer needs mapping. No mapping flag is set in that case, so current
users do not use the pointers as mapping owners. |
| A flaw was found in the foreman_ansible plugin's Ansible inventory API. The controller builds its host query using an unscoped Host.where call that does not enforce the search filter associated with the caller's view_hosts permission. An authenticated user whose host visibility is restricted by a permission filter can supply arbitrary host IDs within their organization and receive the full Ansible inventory for those hosts, including parameter values marked as hidden. |
| SigNoz versions 0.88.0 through 0.141.0 fail to apply authorization wrappers to trace-funnel analytics endpoints in the HTTP handler. Unauthenticated attackers can submit arbitrary funnel definitions to retrieve trace analytics including identifiers, durations, span counts, service topology, and error activity without credentials. |
| The Location Manager plugin for WordPress is vulnerable to generic SQL Injection via 'latitude' and 'longitude' REST API Parameters in all versions up to, and including, 2.3.38 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The injection is triggered when the orderby=lat_lon parameter is supplied, and affects multiple publicly accessible REST endpoints including geodir/v2/locations/cities, /regions, /countries, and /neighbourhoods via both the get_locations() and get_neighbourhoods() functions. |
| The Qi Addons For Elementor plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 's' parameter in all versions up to, and including, 1.11 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the Table of Contents widget to be placed on a template that renders on the WordPress search-results page (e.g., a sitewide header or footer template) with the 'Limit ToC to Main Page Content' option left at its default value of No, so the widget scans the search-results heading that reflects the unsanitized `s` parameter. |
| The WP Multi Store Locator Pro plugin for WordPress is vulnerable to generic SQL Injection via the 'store_locatore_search_radius' parameter in all versions up to, and including, 4.5.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The injection occurs in a numeric, unquoted SQL context, meaning WordPress's wp_magic_quotes() addslashes-based protection cannot neutralize the payload, and the AJAX handler is registered on wp_ajax_nopriv_make_search_request with no nonce or capability check, making it fully accessible without authentication. |
| The FileBird – WordPress Media Library Folders & File Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via image alt text in all versions up to, and including, 6.5.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Printcart Web to Print Product Designer for WooCommerce plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 2.8.5 via the 'mockups' parameter. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. A valid nonce is obtainable by unauthenticated users via the companion nbd_check_use_logged_in nopriv AJAX endpoint, which freely mints and returns a nbdesigner-get-data nonce to any visitor; additionally, if the NBDESIGNER_ENABLE_NONCE constant is disabled, even this nonce gate is bypassed entirely. |
| The NEX-Forms – Ultimate Forms Plugin for WordPress plugin for WordPress is vulnerable to generic SQL Injection via the 'additional_params' parameter in all versions up to, and including, 9.3.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The operator allowlist applied by get_table_records() when building its own WHERE fragment is not enforced on the same tainted additional_params array when it is forwarded to get_total_records(), leaving the SQL sink unprotected. |
| The ShopLentor – All-in-One WooCommerce Growth & Store Enhancement Plugin plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via Query-String Parameter Name in all versions up to, and including, 3.5.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. The vulnerability is triggered via the WL: Product Horizontal Filter widget, which reflects attacker-supplied query-string parameter names from the current URL into option element value attributes without escaping, allowing payload breakout from the value="..." attribute context. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdoops: free page bitmap when the backing MTD is removed
mtdoops_notify_add() allocates oops_page_used when the configured MTD
device is registered. mtdoops_notify_remove() detaches from that device
but leaves the bitmap allocated. If the same MTD device is later
registered again, the add path allocates a new bitmap and overwrites the
old pointer, leaking one vmalloc allocation per remove/add cycle.
This is only visible when the backing MTD device can disappear and be
registered again while mtdoops remains loaded, so the usual static MTD
case does not expose it.
Free the bitmap after unregistering the dumper and flushing the pending
workers, then clear the pointer and page count before a later attach can
allocate fresh state. Clearing the pointer also keeps the module exit
path from freeing the same bitmap a second time after a remove event. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
In order to traverse or add/remove ap_matrix_mdev objects in the
matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held.
There are two functions that access the list without holding the mutex:
vfio_ap_mdev_probe function
~~~~~~~~~~~~~~~~~~~~~~~~~~~
The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock
mutex to guard the add of a newly created ap_matrix_mdev object to the
matrix_dev->mdev_list. This mutex does not protect list access; its purpose
is to guard against concurrent access to fields contained in an
ap_matrix_mdev object. This could lead to kernel memory corruption or
use-after-free if another mdev is created or removed concurrently.
The adding of an ap_matrix_mdev object to matrix_dev->mdev_list
is now guarded by the matrix_dev->guests_lock which is the correct
way to protect against concurrent mdev_list access.
Also removed the following two lines of code because the matrix_mdev is
allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger
and cfg_chg_trigger are already zero-initialised when the struct is
allocated before the call to vfio_register_emulated_iommu_dev. This
prevents a window whereby these triggers are set to NULL after
the device is exposed to userspace.
matrix_mdev->req_trigger = NULL;
matrix_mdev->cfg_chg_trigger = NULL;
vfio_ap_mdev_for_queue function
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The status_show function that supports display of the status attribute of
the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue
function which iterates the matrix_dev->mdev_list to find the object
representing the queue device whose status is to be displayed. In order to
traverse this list, the matrix_dev->guests_lock mutex must be held.
To fix this, the guests_lock mutex is taken prior to taking the
matrix_dev->mdevs_lock mutex in the status_show function. It is taken
there rather than the vfio_ap_mdev_for_queue function - where it is
needed - because it must be taken prior to the mdevs_lock mutex in order to
adhere to the proper locking order and prevent a lockdep splat; also
because the mdevs_lock is needed there to access fields within
the matrix_mdev object in that function.
See the vfio-ap-locking.rst in the linux kernel tree. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove
The vfio_ap_config_remove function uses the bitmap_andnot function to clear
bits from the matrix_mdev->matrix.adm bitmap (specifies the control domains
assigned to the mdev). This prevents the explicitly unplugged control
domains from being removed the KVM guest. The bitmap_and function is used
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: eisa: Fix infinite loop when parsing invalid IRQ value
When an invalid value is passed via the "eisa_irq_edge=" kernel
command line parameter (e.g. "eisa_irq_edge=16,5"), eisa_irq_setup()
prints an error message and continues without advancing the current
position. As a result the same invalid value is parsed again and
again, causing an infinite loop while the kernel boots.
Advance to the next comma-separated entry, or stop parsing when there
is no next entry, before continuing so that the remaining entries are
processed normally. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: reject an arena whose nfree is below the lane count
The BTT info block's nfree field, the number of reserve free blocks, is
read from the medium without validation. btt_freelist_init() and
btt_rtt_init() size the per-lane freelist[] and rtt[] arrays by nfree,
but the I/O path indexes them by the lane from nd_region_acquire_lane(),
which is bounded by nd_region->num_lanes (ND_MAX_LANES), not by nfree.
A crafted or foreign arena whose nfree is below the lane count makes
freelist[lane]/rtt[lane] run past the allocation: an out-of-bounds write.
btt.rst documents the nlanes = min(nfree, num_cpus) invariant, which the
code does not currently honor: num_lanes is ND_MAX_LANES regardless of
nfree. Reject an arena whose nfree is below num_lanes at discovery,
before the per-lane arrays are allocated, enforcing that invariant. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb_cma: fix null nodemask dereference in hugetlb_cma_alloc_frozen_folio
alloc_buddy_hugetlb_folio_with_mpol() can pass a NULL nodemask to
alloc_fresh_hugetlb_folio() as a fallback to allocate from all nodes. If
order is gigantic, alloc_fresh_hugetlb_folio() propagates the NULL
nodemask down to hugetlb_cma_alloc_frozen_folio() via
alloc_gigantic_frozen_folio().
Additionally, hugetlb_cma_alloc_frozen_folio() previously attempted
allocation on hugetlb_cma[nid] without verifying if nid is included in the
caller's nodemask. Adding a node_isset(nid, *nodemask) check ensures the
initial preferred node allocation honors the memory policy / nodemask.
However, hugetlb_cma_alloc_frozen_folio() dereferences the nodemask in
node_isset(nid, *nodemask) and for_each_node_mask(node, *nodemask),
leading to a null pointer dereference kernel panic when nodemask is NULL.
Fix this by checking if nodemask is NULL in
hugetlb_cma_alloc_frozen_folio() and defaulting it to
cpuset_current_mems_allowed. Enclose the allocation attempts within the
cpuset seqcount retry loop so that if the cpuset changes concurrently
during allocation, the attempts are retried using the updated nodemask.
This ensures that the initial node check and fallback loop safely honor
the task's cpuset without violating cpuset constraints or causing NULL
pointer dereferences or unexpected allocation failures.
From a userspace perspective, this bug allows an unprivileged user to
crash the kernel (trigger a panic) by requesting a gigantic hugepage
allocation with MPOL_PREFERRED_MANY on a system where CMA is only
configured on a subset of NUMA nodes.
This can be reproduced by booting a VM with two NUMA nodes, restricting
CMA to Node 1 (e.g., hugetlb_cma=1:1G default_hugepagesz=1G hugepagesz=1G
hugepages=0), and running a program that allocates a 1GB hugepage area
without reserving, restricts allocation to Node 0 using mbind() with
MPOL_PREFERRED_MANY, and triggers a page fault:
void *ptr = mmap(NULL, 1UL << 30, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB |
MAP_HUGE_1GB | MAP_NORESERVE, -1, 0);
unsigned long nodemask = 1; /* Node 0 */
mbind(ptr, 1UL << 30, MPOL_PREFERRED_MANY, &nodemask,
sizeof(nodemask) * 8, 0);
memset(ptr, 0, 1UL << 30); /* Trigger fault */
This results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:hugetlb_cma_alloc_frozen_folio+0x75/0x120
Call Trace:
<TASK>
only_alloc_fresh_hugetlb_folio.isra.0+0x2c/0x160
alloc_surplus_hugetlb_folio+0x6d/0x100
alloc_hugetlb_folio+0x3c5/0x660
hugetlb_no_page+0x3d9/0x650 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: avoid out-of-bounds writes for compound folios
migrate_device_range() and migrate_device_pfns() clear the entries
following a compound folio so that the PFN arrays retain their
page-granular representation.
If a compound folio extends beyond the end of the caller-provided range,
the loops clear all following folio entries without limiting them to the
number of slots remaining in the npages-sized array, causing an
out-of-bounds write.
Do not proceed with a compound folio if its page-granular representation
does not fit entirely in the remaining PFN array. If this happens, drop
any reference and lock acquired for the folio, clear the remaining
entries, and stop collecting.
Observed with a KASAN x86 QEMU kernel using the HMM migrate_anon_huge_zero
selftest. Closing /dev/hmm_dmirror0 after migrating an anonymous huge
page to device memory exercises:
dmirror_fops_release()
-> dmirror_device_evict_chunk()
-> migrate_device_range() |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails
nvmf_create_ctrl() owns the fabrics options and frees them whenever
->create_ctrl() returns an error, so a transport must not free them on
its own error paths. nvme-fc tracks this by testing ctrl->ctrl.opts in
nvme_fc_ctrl_free(), which requires nvme_fc_init_ctrl() to clear that
pointer on every error exit.
The coupling is implicit, and commit 1a9e218195a5 ("nvme: split device
add from initialization") broke it by adding a second error exit. When
nvme_add_ctrl() fails, nvme_fc_init_ctrl() jumps to out_put_ctrl:, past
the "ctrl->ctrl.opts = NULL" that only sits on the fail_ctrl: path, so
nvme_fc_ctrl_free() frees the options and nvmf_create_ctrl() frees them
a second time:
BUG: KASAN: slab-use-after-free in nvmf_free_options+0x30/0x190
nvmf_free_options+0x30/0x190 drivers/nvme/host/fabrics.c:1284
nvmf_create_ctrl drivers/nvme/host/fabrics.c:1374 [inline]
Freed by task 5534:
nvme_fc_ctrl_free drivers/nvme/host/fc.c:2374 [inline]
nvme_fc_init_ctrl+0xe17/0x1450 drivers/nvme/host/fc.c:3605
nvme_add_ctrl() fails when dev_set_name() cannot allocate, so this is
reachable under memory pressure or fault injection. Without KASAN the
options are freed twice.
Rather than clear the pointer on the second exit as well, derive
ownership the way nvme-tcp, nvme-rdma and nvme-loop do, from list
membership: their free_ctrl leaves the options alone unless the
controller made it onto the transport list.
The list cannot simply be populated on the success path as it is there.
nvme-fc runs the initial connect synchronously via flush_delayed_work(),
and the controller has to be reachable on rport->ctrl_list for the whole
of it: nvme_fc_unregister_remoteport() needs to find it to signal
connectivity loss, nvme_fc_match_disconn_ls() matches an incoming
Disconnect Association LS against ctrl->association_id, which is only
assigned during that window, nvme_fc_resume_controller() needs it on
remoteport re-registration, and nvme_fc_existing_controller() uses it to
reject a duplicate connect racing the one in flight.
Keep the insertion where it is and add a fail_unlist: label, falling
into fail_ctrl:, for the error paths that run after it. The earlier
error paths never reach the insertion and keep using fail_ctrl:
directly, so the list is only touched where the controller is actually
on it.
nvme_fc_ctrl_free() cannot use the plain "goto free_ctrl" the other
transports use, because it still has to put_device(), release the rport
reference and free the ida entry for resources taken before the
insertion. Sample list_empty() under rport->lock instead.
ctrl->ctrl.opts also stays valid for the whole teardown now. That is
not the bug being fixed, but it removes some fragility around the old
idiom: nvme_free_ctrl() calls nvme_auth_free() before ->free_ctrl(), and
ctrl_max_dhchaps() dereferences ctrl->opts without a NULL check when
ctrl->dhchap_ctxs is set, which nvme-fc permits since NVMF_ALLOWED_OPTS
allows the dhchap options. The nvme sysfs attributes that dereference
ctrl->opts, such as hostnqn and address, evaluate their is_visible()
test once at device_add() time and stay readable until
cdev_device_del(). |
