| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't resurrect a scalar id dropped by collect_linked_regs()
check_cond_jmp_op() copies the compared registers into
env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies
those snapshots back into both branch states afterwards.
collect_linked_regs() records at most LINKED_REGS_MAX members of a
linked registers group in the jump history and calls clear_scalar_id()
for every member that does not fit. The compared register is not exempt
from that.
As a consequence, sync_linked_regs() might adjust ranges for more
registers than bpf_bt_sync_linked_regs() can propagate precision to.
Collect the linked registers before the snapshots are taken instead.
This might lead to some unnecessary clear_scalar_id's, but from
previous testing situations with many linked registers are
extremely rare. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_btf_find_by_name_kind() as sleepable
When bpf_btf_find_by_name_kind() finds a type in module BTF, it
returns a new BTF object fd through __btf_new_fd(). This reaches
anon_inode_getfd(), which can sleep while allocating or expanding the
current task fd table.
The helper prototype does not set might_sleep, so the verifier allows
the helper in non-sleepable contexts such as BPF timer callbacks. The
fd allocation can then sleep in softirq context and install the fd into
the interrupted task.
Mark the helper as sleepable. This preserves calls from the main body
of a sleepable syscall program while rejecting calls from its
non-sleepable regions. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject tail calls directly from callback frames
A tail call from a non-zero frame is modeled as a return from that frame.
The verifier makes R0 unknown and calls prepare_func_exit() for the taken
branch.
When the current frame is a synchronous callback, prepare_func_exit()
enforces the callback return-value contract and marks R0 precise. Since the
tail-call path synthesized R0 rather than deriving it from an instruction,
precision backtracking reaches the callback-calling instruction with R0
still requested and triggers the "callback unexpected regs" verifier bug.
A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD.
Tail calls reachable from callbacks are already rejected later by
check_max_stack_depth(). Reject a tail call made directly by a callback
before constructing the inconsistent return state, using the existing
diagnostic. Tail calls from ordinary subprograms keep their current
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zstd: fix lost wakeup when waiting for a workspace
A writer can sleep forever in zstd_get_workspace() even though a workspace
is free. When zstd_alloc_workspace() fails, the task is queued on
zwsm->wait and schedules unconditionally, never re-testing the pool.
zstd_put_workspace() publishes the workspace and then calls cond_wake_up(),
which only wakes when a sleeper is already visible, so a workspace returned
between the failed allocation and prepare_to_wait() wakes nobody. The
window is wide: zstd_alloc_workspace() goes through kvmalloc() and may
enter reclaim.
Only a max level workspace triggers the wakeup and one is deliberately kept
allocated as the fallback every waiter waits for, so once its wakeup is
lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens
to return one. Re-check the pool after prepare_to_wait() has published the
waiter, and use the workspace if one turned up. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: drr: clamp quantum in change class
drr_change_class() rejects explicit quantum==0 but falls back to
psched_mtu() with no floor. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless
device) makes the deficit-refill loop spin under the qdisc lock.
Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the
fallback path. The explicit-zero reject is preserved.
Conditions to recreate the bug:
CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root drr
tc class add dev dummy0 parent 1: classid 1:1 drr quantum 1 |
| A security flaw has been discovered in YunaiV/zhijiantianya ruoyi-vue-pro up to 2026.08. Affected by this vulnerability is the function validOAuthClientFromCache of the file yudao-module-system/src/main/java/cn/iocoder/yudao/module/system/service/oauth2/OAuth2ClientServiceImpl.java of the component OAuth2 Client. The manipulation of the argument redirect_uri results in open redirect. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: drop the replaced rule from the list when reprogramming fails
nfp_net_fs_add() replaces an existing rule by deleting it from the
hardware, decrementing nn->fs.count and programming the new one. If
nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the
success path reaches list_replace() - so the list is one longer than
nn->fs.count, and it advertises a rule whose hardware entry has already
been torn down.
nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes
its buffer one entry short of what the GRXCLSRLALL walk wants to write.
That used to overwrite one u32 past the allocation; since the walk is
bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the
counter. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix subbuf resize races with trace_pipe_raw readers
Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak
uninitialized memory to userspace due to stale size values.
Modify ring_buffer_alloc_read_page() to handle the resizing of an
existing buffer_data_read_page if necessary and add a new
ring_buffer_read_page_size(). This new function enables ring-buffer
buffer_data_read_page users to not call the racy
ring_buffer_subbuf_size_get(). This makes the spare_size member of
ftrace_buffer_info redundant.
Finally, handle buffer_data_read_page/reader_page order discrepancy in
ring_buffer_read_page(). On a mismatch simply copy manually the data to
the buffer_data_read_page. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash()
The switch of the FineIBT preamble from "subl $hash, %r10d" to the
shorter "subl $hash, %eax" moved the hash immediate from offset 7 to
offset 5 of the preamble. fineibt_preamble_hash was updated to match,
but the open-coded offset in cfi_get_func_hash() was missed and it
still reads the hash at offset 7.
cfi_get_func_hash() is used by the BPF JIT to give a struct_ops
trampoline the CFI hash of the stub function it stands in for. With
FineIBT the trampoline now gets the upper half of the real hash
followed by the first two bytes of the next instruction, so the first
indirect call from the kernel into a struct_ops program,
tcp_init_congestion_control() calling ->init() of a BPF congestion
control for example, fails the FineIBT check and the kernel dies with
a CFI failure.
Move the FineIBT preamble template and its offset defines above
cfi_get_func_hash() and use fineibt_preamble_hash there, so every
reader of the preamble shares one definition of its layout. The
CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only
configuration in which cfi_mode can take that value.
cfi_get_func_arity() does not need the same treatment: the __bhi_args
call whose displacement it reads still ends at the function address. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix user-space data loss with MADV_FREE and THP
Some of users of Polars (a data analytics library) have lost production
data from this bug. They seem to have just the right combination of
huge pages, MADV_FREE and heavy reclaim pressure.
pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY),
silently discarding the hardware dirty bit. The subsequent
pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into
_PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already
stripped from the value, so there is nothing left to transfer.
Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask,
and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify()
is the odd one out. Any pmd_modify() on a writable, dirty PMD loses
the dirty state.
One visible consequence is data loss with MADV_FREE on PMD-mapped THP:
memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty
madvise(buf, size, MADV_FREE); // PMD cleaned but left writable,
// folio marked lazyfree
memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again
mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit
mprotect(buf, size, PROT_READ|PROT_WRITE);
// ... memory pressure ...
Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with
no dirty bit set anywhere and frees it in
__discard_anon_folio_pmd_locked(), even though the data was rewritten
after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA
hinting alone can trigger the same loss, as do_huge_pmd_numa_page()
restores the PMD through pmd_modify() as well.
PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping
the dirty bit means rewritten data is never written back.
Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like
pte_modify() and pud_modify() do. The existing
pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the
hardware-dirty <-> saved-dirty transition based on the write bit,
preserving the shadow-stack encoding rules. |
| In the Linux kernel, the following vulnerability has been resolved:
sunvdc: unmap LDC cookies when the descriptor send fails
__send_request() maps the request's pages into the LDC channel's map
table (ldc_map_sg()), fills in the descriptor and marks it
VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger().
When the trigger fails, the error path only prints a message: the
descriptor stays READY and the cookies are never unmapped. The
mapping is normally released in vdc_end_one() when the peer completes
the descriptor - but a descriptor whose doorbell was never sent will
never complete, and since dr->prod is not advanced on failure, the
reset path (vdc_requeue_inflight(), which walks [cons, prod)) never
visits it either. The map table entries are leaked permanently.
Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop
when vio_ldc_send() returns EAGAIN") trigger failures occur in
practice under load, so every resulting I/O error also leaks one
request's worth of entries from the fixed-size (8192 entries per
channel) map table. Because the allocator hands out contiguous
ranges, fragmentation makes large multi-segment requests fail first
as the table drains, until ldc_map_sg() fails permanently and the
disk is dead until reboot.
It also makes any retry-based recovery unusable: requeuing the
request on -EAGAIN remaps the pages on every attempt, overwriting
desc->cookies and orphaning the previous mapping, so the table
drains at the retry rate. This is the memory exhaustion observed
when the requeue approach was first tested in October 2025.
Roll back on failure: unmap the cookies, mark the descriptor FREE
again and clear the request entry. If the trigger failed with
-ENOTCONN, __vdc_tx_trigger() has already reset the port, which
tears down and reallocates both the dring and the LDC channel
including its map table - nothing to roll back, and the stale
descriptor must not be touched. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: initialize ptp_lock at probe time
priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs
during __stmmac_open(). However, the lock is also used while the
interface is down and has never been opened: tc_taprio_configure()
invokes the PTP gettime64() callback to compute the EST base time when
offloading a TAPRIO schedule, and stmmac_get_time() takes
priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour.
Move the rwlock_init() to __stmmac_dvr_probe(), together with the other
private locks, so that ptp_lock is always valid regardless of the
interface state. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: reset HTB scheduler topology before freeing queues
HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler
queues via otx2_qos_txschq_set_parent_topology(), but teardown freed
those queues without clearing TOPOLOGY. The AF only restores PARENT and
SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the
shared scheduler pool and affect later allocations.
Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero
TL4 through TL2 TOPOLOGY before each schq is returned to the AF during
hierarchy teardown and cfg rollback. Skip the aggregation level (TL1):
it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs,
and is not freed back to the AF by nix_txschq_free_one(). |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: initialize policy rwsem before sysfs publication
cpufreq_policy_alloc() initializes policy->rwsem after
kobject_init_and_add() has created the policy sysfs directory and its
default attributes. A sysfs access can therefore reach a policy callback
before the semaphore has been initialized.
Initialize policy->rwsem before publishing the policy kobject so sysfs
callbacks always see an initialized semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Don't destroy fields when event removal fails
destroy_user_event() destroys the event's fields before attempting to
remove the trace event call. If user_event_set_call_visible() fails,
e.g. because the event is still enabled and trace_remove_event_call()
returns -EBUSY, the event is left registered with an irreversibly
destroyed field list. Any subsequent interaction with the event then
operates on an empty field list while it is still fully visible in
tracefs.
Move the field destruction after the call removal, and splice the
field list back onto the event when the removal fails so the event
remains in a consistent state. |
| A weakness has been identified in chillzhuang SpringBlade up to 5.0.2. This affects the function UserServiceImpl.userInfo of the file blade-service/blade-system/src/main/java/org/springblade/system/service/impl/UserServiceImpl.java of the component user-auth-info Endpoint. This manipulation of the argument userId causes authorization bypass. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. CVE-2026-56100 and CVE-2026-36765 are distinct issues. The vendor was contacted early about this disclosure but did not respond in any way. |
| Session fixation in HTTP management authentication allows remote attackers to gain unauthorized access to an authenticated management session via reuse of a session identifier retained across successful authentication.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| The door access control on a Norwegian Cruise Line asset grants entry based only on the credential's static 7-byte UID stored on an NTAG212 NFC chip. A UID is a manufacturer serial number sent in the clear on every read and is not intended to be secret or to authenticate the holder. Validating on the UID of the NTAG212 NFC chip alone is identification, not authentication, and the credential has no challenge-response capability that would resist copying. |
| Python Social Auth is a social authentication/registration mechanism. Prior to version 5.0.0, the Vend OAuth2 backend used only the numeric Vend user_id as the social-auth UID. When multiple Vend shops authenticate through the same application, users from different shops with the same internal Vend user ID could collide in the social-auth association table. A user from one shop could then be authenticated as the local account previously associated with the same numeric user ID from another shop. The issue affects applications using the Vend OAuth2 backend with more than one Vend shop. Version 5.0.0 patches the issue. |
| DBHub is a database MCP server for Postgres, MySQL, SQL Server, Oracle, MariaDB, SQLite. Prior to version 0.22.6, setting `readonly = true` on the `execute_sql` tool does not make the connection read-only. The connectors are written to set PostgreSQL `default_transaction_read_only=on` (and open SQLite in `readOnly` mode), but that code is gated on a config value that is never populated, so it never runs. The only thing left enforcing read-only is a classifier that inspects the first keyword of each statement. Any `SELECT` that writes or has side effects through a function call passes it. With an ordinary role this allows sequence tampering; with a privileged role it allows writing arbitrary files on the server (`lo_export`), reading arbitrary host files (`pg_read_file`), and remote code execution (`dblink` + `COPY ... TO PROGRAM`). The HTTP transport is unauthenticated and binds to `0.0.0.0` by default, so this is reachable by any network caller of `/mcp`. Version 0.22.6 patches the issue. |
