| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. The affected element is the function formAccept of the file /goform/formAccept of the component POST Request Handler. The manipulation of the argument submit-url leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Edimax EW-7478APC 1.04. This vulnerability affects the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component POST Request Handler. The manipulation of the argument rootAPmac results in os command injection. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer. |
| Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat meant that special roles and empty authorisation constraints were not included when the effective web.xml was logged.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119 which fixes the issue. |
| Net::BitTorrent versions through 2.0.1 for Perl allow remote memory exhaustion via an uncapped peer-wire message-length prefix.
The peer-wire framing in _process_messages trusts the 4-byte length prefix sent by a connected peer with no upper bound, while receive_data appends every inbound byte to the input buffer. A peer announces a length prefix of up to about 4 GiB and then streams bytes; the decoder waits until the buffer holds the full message before processing it, so the buffer grows without limit.
Peer connections are unauthenticated, so any peer in the swarm exhausts the downloading process's memory. The largest legitimate message is a 16 KiB piece block, so any announced length far above that is anomalous. |
| Delta Electronics DVP12SE PLCs are susceptible to a resource allocation vulnerability without limits or throttling (CWE-770) within their Modbus TCP service. |
| OS Command Injection Remote Code Execution Vulnerability in API in Progress ADC Products allows an un-authenticated attacker to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in multiple command endpoints |
| A flaw was found in Rust's Ring package. A panic may be triggered when overflow checking is enabled. In the QUIC protocol, this flaw allows an attacker to induce this panic by sending a specially crafted packet. It will likely occur unintentionally in 1 out of every 2**32 packets sent or received. |
| If an attacker causes kdcproxy to connect to an attacker-controlled KDC server (e.g. through server-side request forgery), they can exploit the fact that kdcproxy does not enforce bounds on TCP response length to conduct a denial-of-service attack. While receiving the KDC's response, kdcproxy copies the entire buffered stream into a new
buffer on each recv() call, even when the transfer is incomplete, causing excessive memory allocation and CPU usage. Additionally, kdcproxy accepts incoming response chunks as long as the received data length is not exactly equal to the length indicated in the response
header, even when individual chunks or the total buffer exceed the maximum length of a Kerberos message. This allows an attacker to send unbounded data until the connection timeout is reached (approximately 12 seconds), exhausting server memory or CPU resources. Multiple concurrent requests can cause accept queue overflow, denying service to legitimate clients. |
| A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS). |
| A flaw was found in libsoup. The SoupWebsocketConnection may accept a large WebSocket message, which may cause libsoup to allocate memory and lead to a denial of service (DoS). |
| A flaw was found in the OpenSSH package. For each ping packet the SSH server receives, a pong packet is allocated in a memory buffer and stored in a queue of packages. It is only freed when the server/client key exchange has finished. A malicious client may keep sending such packages, leading to an uncontrolled increase in memory consumption on the server side. Consequently, the server may become unavailable, resulting in a denial of service attack. |
| A flaw was discovered in libvirt in the XML file processing. More specifically, the parsing of user provided XML files was performed before the ACL checks. A malicious user with limited permissions could exploit this flaw by submitting a specially crafted XML file, causing libvirt to allocate too much memory on the host. The excessive memory consumption could lead to a libvirt process crash on the host, resulting in a denial-of-service condition. |
| A flaw was found in the Linux kernel's ksmbd component. A memory leak can occur if a client sends a session setup request with an unknown NTLMSSP message type, potentially leading to resource exhaustion. |
| Allocation of Resources Without Limits or Throttling vulnerability in leandrocp MDEx allows Excessive Allocation.
MDEx.parse_document/2 accepts a {:json, json} source. In lib/mdex.ex, the private json_to_node/1 function passes the attacker-controlled node_type value to Module.concat/1, which calls String.to_atom/1 and interns a brand-new atom for every distinct value. Atoms are never garbage collected on the BEAM, so a crafted JSON document carrying a unique node_type at each (deeply nested) node mints one permanent atom per node.
A single document can intern hundreds of thousands of atoms, and a large enough document exhausts the default atom table (around 1,048,576 atoms) and aborts the entire Erlang VM, taking down every process on the node. Any application that passes untrusted input to the {:json, ...} source of MDEx.parse_document is exposed to an unauthenticated denial-of-service.
This issue affects mdex from 0.4.3 before 0.13.2. |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader
Versions Affected:
before 1.9.5
before 2.5.9
before 3.0.0-M3
Description:
The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source.
A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load.
The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default.
Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. |
| A vulnerability was determined in Wavlink WL-NU516U1-A M16U1_V240425. The affected element is the function sub_401D68 of the file /cgi-bin/wireless.cgi of the component POST Parameter Handler. This manipulation of the argument SSID2G2/SSID5G2/AuthMethod2/WPAPSK12 causes command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The affected component should be upgraded. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A flaw was found in Apicurio Registry. The DocumentBuilderAccessor correctly blocks external DTD and schema access but does not disable DOCTYPE declarations or enable FEATURE_SECURE_PROCESSING. An attacker with artifact-write permission can upload XML documents with internal entity-expansion payloads (billion-laughs variant) that cause CPU and heap exhaustion, partially mitigated by the JAXP default 64,000 entity-expansion limit. |
| A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution. |
| A vulnerability has been found in D-Link DCS-935L 1.10.01. This affects the function sub_400E40 of the file setconf.cgi of the component POST Parameter Handler. Such manipulation of the argument UID leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
